South-Eastern Asia - Plastic Plates, Sheets, Film, Foil and Strip - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSouth-Eastern Asia: Market for Plastic Plates, Sheets, Film, Foil And Strip 2024
Market Size for Plastic Plates, Sheets, Film, Foil And Strip in South-Eastern Asia
The Southeast Asian market for plastic plates, sheets, film, foil and strip dropped to $X in 2022, shrinking by X% against the previous year. Over the period under review, consumption showed a noticeable slump. The pace of growth appeared the most rapid in 2021 with an increase of X% against the previous year. Over the period under review, the market reached the peak level at $X in 2013; however, from 2014 to 2022, consumption remained at a lower figure.
Production of Plastic Plates, Sheets, Film, Foil And Strip in South-Eastern Asia
In value terms, production of plastic plates, sheets, film, foil and strip declined to $X in 2022 estimated in export price. In general, production, however, recorded a pronounced decrease. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, production of reached the peak level at $X in 2013; however, from 2014 to 2022, production remained at a lower figure.
Join Us at HANNOVER MESSE 2024
Don’t miss your chance to connect with us directly. Schedule a personal meeting to dive deeper into how solutions.
Hall 002, Stand C10. 22 - 26 April 2024 | Hannover, Germany
Exports of Plastic Plates, Sheets, Film, Foil And Strip
Exports in South-Eastern Asia
In 2022, overseas shipments of plastic plates, sheets, film, foil and strip decreased by X% to X tons for the first time since 2011, thus ending a ten-year rising trend. The total export volume increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2017 with an increase of X% against the previous year. The volume of export peaked at X tons in 2021, and then fell modestly in the following year.
In value terms, exports of plastic plates, sheets, film, foil and strip stood at $X in 2022. The total export value increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern remained consistent, with only minor fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2021 when exports increased by X%. Over the period under review, the exports of reached the peak figure in 2022 and are likely to see gradual growth in the immediate term.
Exports by Country
Malaysia (X tons) and Thailand (X tons) represented the major exporters of plastic plates, sheets, film, foil and strip in 2022, amounting to approx. X% and X% of total exports, respectively. Indonesia (X tons) took the next position in the ranking, distantly followed by Vietnam (X tons). All these countries together held approx. X% share of total exports. Singapore (X tons) and the Philippines (X tons) followed a long way behind the leaders.
From 2012 to 2022, the biggest increases were recorded for Vietnam (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the largest plastic plate, sheet, film, foil and strip supplying countries in South-Eastern Asia were Malaysia ($X), Thailand ($X) and Indonesia ($X), together comprising X% of total exports. Vietnam, Singapore and the Philippines lagged somewhat behind, together comprising a further X%.
Among the main exporting countries, Vietnam, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2022, the export price in South-Eastern Asia amounted to $X per ton, increasing by X% against the previous year. In general, the export price, however, saw a mild decline. The most prominent rate of growth was recorded in 2021 when the export price increased by X%. Over the period under review, the export prices attained the maximum at $X per ton in 2012; however, from 2013 to 2022, the export prices remained at a lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Singapore ($X per ton), while the Philippines ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Vietnam (X%), while the other leaders experienced a decline in the export price figures.
Imports of Plastic Plates, Sheets, Film, Foil And Strip
Imports in South-Eastern Asia
In 2022, imports of plastic plates, sheets, film, foil and strip in South-Eastern Asia dropped to X tons, reducing by X% compared with 2021. In general, imports, however, recorded strong growth. The pace of growth was the most pronounced in 2016 with an increase of X%. Over the period under review, imports of attained the peak figure at X tons in 2021, and then reduced in the following year.
In value terms, imports of plastic plates, sheets, film, foil and strip shrank modestly to $X in 2022. Over the period under review, imports, however, recorded strong growth. The pace of growth was the most pronounced in 2017 with an increase of X%. Over the period under review, imports of hit record highs at $X in 2021, and then contracted in the following year.
Imports by Country
In 2022, Vietnam (X tons), distantly followed by Malaysia (X tons), Indonesia (X tons), Thailand (X tons), the Philippines (X tons) and Singapore (X tons) were the major importers of plastic plates, sheets, film, foil and strip, together comprising X% of total imports. Myanmar (X tons) followed a long way behind the leaders.
From 2012 to 2022, the biggest increases were recorded for Myanmar (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Vietnam ($X) constitutes the largest market for imported plastic plates, sheets, film, foil and strip in South-Eastern Asia, comprising X% of total imports. The second position in the ranking was taken by Malaysia ($X), with a X% share of total imports. It was followed by Indonesia, with a X% share.
In Vietnam, imports of plastic plates, sheets, film, foil and strip increased at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Malaysia (X% per year) and Indonesia (X% per year).
Import Prices by Country
The import price in South-Eastern Asia stood at $X per ton in 2022, with an increase of X% against the previous year. Over the period under review, the import price recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 an increase of X% against the previous year. Over the period under review, import prices hit record highs in 2022 and is likely to see steady growth in the immediate term.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Singapore ($X per ton), while Myanmar ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Philippines (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in South-Eastern Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22213010 - Other plates..., of polymers of ethylene, not reinforced, t hickness . 0,125 mm
- Prodcom 22213017 - Other plates..., of polymers of ethylene, not reinforced, etc., t hickness > 0,125 mm
- Prodcom 22213021 - Other plates..., of biaxially orientated polymers of propylene, t hickness . 0,10 mm
- Prodcom 22213023 - Other plates..., of polymers of propylene, thickness . 0,10 mm, others
- Prodcom 22213026 - Strip of polymers of propylene, of a thickness of > 0,10 mm and a width of > 5 mm but . .20 mm, of the kind used for packaging (excluding self-adhesive products)
- Prodcom 22213030 - Other plates..., of polymers of styrene, not reinforced, etc.
- Prodcom 22213035 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213036 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213037 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213038 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213053 - Plates..., of polymethyl methacrylate, not reinforced, etc.
- Prodcom 22213059 - Plates..., of other acrylic polymers, not reinforced, etc., n.e.c.
- Prodcom 22213061 - Plates, sheets, film, foil, strip of polycarbonates, non-cellular excluding floor, wall, ceiling coverings - self-adhesive, r einforced, laminated, supported/similarly combined with other materials
- Prodcom 22213063 - Plates..., of unsaturated polyesters, not reinforced, etc.
- Prodcom 22213065 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness . 0,35 mm
- Prodcom 22213067 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness > 0,35 mm
- Prodcom 22213069 - Plates, sheets, film, foil, strip of polyesters, non-cellular excluding floor, wall, ceiling coverings, self-adhesive - of polycarbonates, polyethylene terephthalate, unsaturated polyesters
- Prodcom 22213070 - Plates, sheets, film, foil and strip, of non-cellular cellulose or its chemical derivatives, not reinforced, laminated, supported or similarly combined with other materials (excluding selfadhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213082 - Plates, sheets, film, foil, strip of polyamides, non-cellular (excluding floor, wall, ceiling coverings, self-adhesive, r einforced, laminated, supported/similarly combined with other materials)
- Prodcom 22213086 - Plates, sheets, film, foil and strip, of non-cellular poly(vinyl butyral), amino-resins, phenolic resins or polymerisation products, not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213090 - Plates, sheets, film, foil and strip, of non-cellular plastics, n .e.c., not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products, floor, wall and ceiling coverings of HS
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Lao People's Democratic Republic
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in South-Eastern Asia, split by region and country
- Trade (exports and imports) in South-Eastern Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in Asia.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the U.S..
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in China.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the EU.
This report provides an in-depth analysis of the global market for plastic plate, sheet, film, foil and strip.