Report Romania - Printers, Copying Machines and Facsimile Machines - Market Analysis, Forecast, Size, Trends and Insights for 499$
Report Update Apr 1, 2024

Romania - Printers, Copying Machines and Facsimile Machines - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)
Subscription
Online access and download
from $350/month

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

View Pricing

Romania: Market for Printers, Copying Machines And Facsimile Machines 2024

Market Size for Printers, Copying Machines And Facsimile Machines in Romania

In 2022, the Romanian printers and copying machines market was finally on the rise to reach $X for the first time since 2018, thus ending a three-year declining trend. The market value increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern remained consistent, with somewhat noticeable fluctuations being observed throughout the analyzed period. Over the period under review, the market hit record highs at $X in 2018; however, from 2019 to 2022, consumption remained at a lower figure.

Exports of Printers, Copying Machines And Facsimile Machines

Exports from Romania

In 2022, the amount of printers, copying machines and facsimile machines exported from Romania reduced to X units, which is down by X% against the previous year's figure. In general, exports, however, showed strong growth. The most prominent rate of growth was recorded in 2015 with an increase of X% against the previous year. The exports peaked at X units in 2018; however, from 2019 to 2022, the exports failed to regain momentum.

In value terms, printers and copying machines exports dropped to $X in 2022. Overall, exports, however, recorded a significant increase. The pace of growth appeared the most rapid in 2015 with an increase of X%. The exports peaked at $X in 2018; however, from 2019 to 2022, the exports failed to regain momentum.

Exports by Country

Germany (X units), Greece (X units) and the Czech Republic (X units) were the main destinations of printers and copying machines exports from Romania, together comprising X% of total exports. Bulgaria, Hungary, Poland, China, France, Spain, Moldova, Lithuania, the United States and the UK lagged somewhat behind, together accounting for a further X%.

From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by China (with a CAGR of X%), while the other leaders experienced more modest paces of growth.

In value terms, Germany ($X) remains the key foreign market for printers, copying machines and facsimile machines exports from Romania, comprising X% of total exports. The second position in the ranking was taken by Bulgaria ($X), with a X% share of total exports. It was followed by the Czech Republic, with a X% share.

From 2012 to 2022, the average annual rate of growth in terms of value to Germany stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Bulgaria (X% per year) and the Czech Republic (X% per year).

Export Prices by Country

In 2022, the average printers and copying machines export price amounted to $X per unit, standing approx. at the previous year. In general, the export price, however, showed a prominent expansion. The pace of growth appeared the most rapid in 2014 an increase of X%. As a result, the export price attained the peak level of $X per unit. From 2015 to 2022, the average export prices remained at a somewhat lower figure.

There were significant differences in the average prices for the major overseas markets. In 2022, amid the top suppliers, the country with the highest price was Moldova ($X per unit), while the average price for exports to Greece ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Moldova (X%), while the prices for the other major destinations experienced more modest paces of growth.

Join Us at HANNOVER MESSE 2024

Don’t miss your chance to connect with us directly. Schedule a personal meeting to dive deeper into how solutions.
Hall 002, Stand C10. 22 - 26 April 2024 | Hannover, Germany

Book Your Meeting
HANNOVER MESSE 2024

Imports of Printers, Copying Machines And Facsimile Machines

Imports into Romania

In 2022, supplies from abroad of printers, copying machines and facsimile machines was finally on the rise to reach X units after three years of decline. Over the period under review, imports, however, recorded a noticeable curtailment. The pace of growth was the most pronounced in 2017 with an increase of X%. Imports peaked at X units in 2018; however, from 2019 to 2022, imports failed to regain momentum.

In value terms, printers and copying machines imports expanded sharply to $X in 2022. Overall, total imports indicated a temperate expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The growth pace was the most rapid in 2018 when imports increased by X% against the previous year. As a result, imports reached the peak of $X. From 2019 to 2022, the growth of imports failed to regain momentum.

Imports by Country

In 2022, Germany (X units) constituted the largest printers and copying machines supplier to Romania, accounting for a X% share of total imports. Moreover, printers and copying machines imports from Germany exceeded the figures recorded by the second-largest supplier, Austria (X units), twofold. The third position in this ranking was held by the Netherlands (X units), with an X% share.

From 2012 to 2022, the average annual rate of growth in terms of volume from Germany stood at X%. The remaining supplying countries recorded the following average annual rates of imports growth: Austria (X% per year) and the Netherlands (X% per year).

In value terms, Germany ($X) constituted the largest supplier of printers, copying machines and facsimile machines to Romania, comprising X% of total imports. The second position in the ranking was held by the Netherlands ($X), with a X% share of total imports. It was followed by Austria, with a X% share.

From 2012 to 2022, the average annual growth rate of value from Germany amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: the Netherlands (X% per year) and Austria (X% per year).

Import Prices by Country

The average printers and copying machines import price stood at $X per unit in 2022, surging by X% against the previous year. Overall, import price indicated a strong expansion from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, printers and copying machines import price increased by X% against 2017 indices. The pace of growth was the most pronounced in 2021 when the average import price increased by X%. The import price peaked in 2022 and is expected to retain growth in the near future.

There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was the Netherlands ($X per unit), while the price for France ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Slovakia (X%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

The countries with the highest volumes of consumption in 2023 were the United States, Singapore and China, with a combined 41% share of global consumption.
China constituted the country with the largest volume of printers and copying machines production, accounting for 42% of total volume. Moreover, printers and copying machines production in China exceeded the figures recorded by the second-largest producer, the Philippines, threefold. Singapore ranked third in terms of total production with an 8.9% share.
In value terms, Germany constituted the largest supplier of printers, copying machines and facsimile machines to Romania, comprising 45% of total imports. The second position in the ranking was taken by the Netherlands, with a 16% share of total imports. It was followed by Austria, with a 9.8% share.
In value terms, Germany remains the key foreign market for printers, copying machines and facsimile machines exports from Romania, comprising 36% of total exports. The second position in the ranking was held by Bulgaria, with a 15% share of total exports. It was followed by the Czech Republic, with a 9.2% share.
The average printers and copying machines export price stood at $443 per unit in 2022, remaining relatively unchanged against the previous year.
In 2022, the average printers and copying machines import price amounted to $328 per unit, surging by 2.8% against the previous year.

This report provides an in-depth analysis of the market for printers and copying machines in Romania. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Product coverage:

  • Prodcom 26201640 - Printers, copying machines and facsimile machines, capable of connecting to an automatic data processing machine or to a network (excluding printing machinery used for printing by means of plates, cylinders and other components, and

Country coverage:

  • Romania

Data coverage:

  • Market volume and value
  • Per Capita consumption
  • Forecast of the market dynamics in the medium term
  • Trade (exports and imports) in Romania
  • Export and import prices
  • Market trends, drivers and restraints
  • Key market players and their profiles

Reasons to buy this report:

  • Take advantage of the latest data
  • Find deeper insights into current market developments
  • Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

  1. How to diversify your business and benefit from new market opportunities
  2. How to load your idle production capacity
  3. How to boost your sales on overseas markets
  4. How to increase your profit margins
  5. How to make your supply chain more sustainable
  6. How to reduce your production and supply chain costs
  7. How to outsource production to other countries
  8. How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

  1. 1. INTRODUCTION

    Making Data-Driven Decisions to Grow Your Business

    1. REPORT DESCRIPTION
    2. RESEARCH METHODOLOGY AND AI PLATFORM
    3. DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
    4. GLOSSARY AND SPECIFIC TERMS
  2. 2. EXECUTIVE SUMMARY

    A Quick Overview of Market Performance

    1. KEY FINDINGS
    2. MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
  3. 3. MARKET OVERVIEW

    Understanding the Current State of The Market and Its Prospects

    1. MARKET SIZE
    2. MARKET STRUCTURE
    3. TRADE BALANCE
    4. PER CAPITA CONSUMPTION
    5. MARKET FORECAST TO 2030
  4. 4. MOST PROMISING PRODUCT

    Finding New Products to Diversify Your Business

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
    2. BEST-SELLING PRODUCTS
    3. MOST CONSUMED PRODUCT
    4. MOST TRADED PRODUCT
    5. MOST PROFITABLE PRODUCT FOR EXPORT
  5. 5. MOST PROMISING SUPPLYING COUNTRIES

    Choosing the Best Countries to Establish Your Sustainable Supply Chain

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP COUNTRIES TO SOURCE YOUR PRODUCT
    2. TOP PRODUCING COUNTRIES
    3. TOP EXPORTING COUNTRIES
    4. LOW-COST EXPORTING COUNTRIES
  6. 6. MOST PROMISING OVERSEAS MARKETS

    Choosing the Best Countries to Boost Your Exports

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
    2. TOP CONSUMING MARKETS
    3. UNSATURATED MARKETS
    4. TOP IMPORTING MARKETS
    5. MOST PROFITABLE MARKETS
  7. 7. PRODUCTION

    The Latest Trends and Insights into The Industry

    1. PRODUCTION VOLUME AND VALUE
  8. 8. IMPORTS

    The Largest Import Supplying Countries

    1. IMPORTS FROM 2012–2023
    2. IMPORTS BY COUNTRY
    3. IMPORT PRICES BY COUNTRY
  9. 9. EXPORTS

    The Largest Destinations for Exports

    1. EXPORTS FROM 2012–2023
    2. EXPORTS BY COUNTRY
    3. EXPORT PRICES BY COUNTRY
  10. 10. PROFILES OF MAJOR PRODUCERS

    The Largest Producers on The Market and Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
  11. LIST OF TABLES

    1. Key Findings In 2023
    2. Market Volume, In Physical Terms, 2012–2023
    3. Market Value, 2012–2023
    4. Per Capita Consumption In 2012-2023
    5. Imports, In Physical Terms, By Country, 2012–2023
    6. Imports, In Value Terms, By Country, 2012–2023
    7. Import Prices, By Country Of Origin, 2012–2023
    8. Exports, In Physical Terms, By Country, 2012–2023
    9. Exports, In Value Terms, By Country, 2012–2023
    10. Export Prices, By Country Of Destination, 2012–2023
  12. LIST OF FIGURES

    1. Market Volume, In Physical Terms, 2012–2023
    2. Market Value, 2012–2023
    3. Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
    4. Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
    5. Trade Balance, In Physical Terms, 2012-2023
    6. Trade Balance, In Value Terms, 2012-2023
    7. Per Capita Consumption, 2012-2023
    8. Market Volume Forecast to 2030
    9. Market Value Forecast to 2030
    10. Products: Market Size And Growth, By Type
    11. Products: Average Per Capita Consumption, By Type
    12. Products: Exports And Growth, By Type
    13. Products: Export Prices And Growth, By Type
    14. Production Volume And Growth
    15. Exports And Growth
    16. Export Prices And Growth
    17. Market Size And Growth
    18. Per Capita Consumption
    19. Imports And Growth
    20. Import Prices
    21. Production, In Physical Terms, 2012–2023
    22. Production, In Value Terms, 2012–2023
    23. Imports, In Physical Terms, 2012–2023
    24. Imports, In Value Terms, 2012–2023
    25. Imports, In Physical Terms, By Country, 2023
    26. Imports, In Physical Terms, By Country, 2012–2023
    27. Imports, In Value Terms, By Country, 2012–2023
    28. Import Prices, By Country Of Origin, 2012–2023
    29. Exports, In Physical Terms, 2012–2023
    30. Exports, In Value Terms, 2012–2023
    31. Exports, In Physical Terms, By Country, 2023
    32. Exports, In Physical Terms, By Country, 2012–2023
    33. Exports, In Value Terms, By Country, 2012–2023
    34. Export Prices, By Country Of Destination, 2012–2023

Recommended reports

Free Data: Printers, Copying Machines And Facsimile Machines - Romania