Latest Report Update: Dec 26, 2019

Norway - Machine Tools For Working Metal - Market Analysis, Forecast, Size, Trends and Insights

Licenses

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service and Privacy Policy. We'll occasionally send you account related emails.

Norway: Overview of the Market for Machine Tools For Working Metal 2019

Market Size for Machine Tools For Working Metal in Norway

The revenue of the machine-tool for working metal market in Norway amounted to $X in 2018, jumping by X% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Over the period under review, the total market indicated a measured increase from 2007 to 2018: its value increased at an average annual rate of +X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2018 figures, machine-tool for working metal consumption decreased by -X% against 2014 indices. The most prominent rate of growth was recorded in 2014 with an increase of X% against the previous year. In that year, the machine-tool for working metal market reached its peak level of $X. From 2015 to 2018, the growth of the machine-tool for working metal market remained at a somewhat lower figure.

Exports of Machine Tools For Working Metal

Exports from Norway

In 2018, approx. X units of machine tools for working metal were exported from Norway; going up by X% against the previous year. Overall, machine-tool for working metal exports continue to indicate a temperate expansion. The growth pace was the most rapid in 2012 when exports increased by X% against the previous year. Over the period under review, machine-tool for working metal exports reached their maximum at X units in 2015; however, from 2016 to 2018, exports remained at a lower figure.

In value terms, machine-tool for working metal exports amounted to $X in 2018. In general, machine-tool for working metal exports continue to indicate a drastic contraction. The growth pace was the most rapid in 2009 when exports increased by X% against the previous year. Over the period under review, machine-tool for working metal exports attained their peak figure at $X in 2014; however, from 2015 to 2018, exports stood at a somewhat lower figure.

Exports by Country

Saudi Arabia (X units), Sweden (X units) and Poland (X units) were the main destinations of machine-tool for working metal exports from Norway, with a combined X% share of total exports. These countries were followed by the UK, China, Serbia, Denmark, the United Arab Emirates, Germany, Liberia, Iceland and South Korea, which together accounted for a further X 2007 to 2018, the most notable rate of growth in terms of exports, amongst the main countries of destination, was attained by Serbia (+X% per year), while the other leaders experienced more modest paces of growth.

In value terms, the largest markets for machine-tool for working metal exported from Norway were Sweden ($X), the UK ($X) and Poland ($X), with a combined X% share of total exports. These countries were followed by Denmark, Germany, China, Liberia, South Korea, the United Arab Emirates, Serbia, Iceland and Saudi Arabia, which together accounted for a further X experienced the highest growth rate of exports, in terms of the main countries of destination over the last eleven-year period, while the other leaders experienced more modest paces of growth.

Export Prices by Country

In 2018, the average machine-tool for working metal export price amounted to $X per unit, coming down by -X% against the previous year. Over the period under review, the machine-tool for working metal export price continues to indicate a deep decrease. The pace of growth appeared the most rapid in 2016 when the average export price increased by X% against the previous year. Over the period under review, the average export prices for machine tools for working metal attained their maximum at $X per unit in 2009; however, from 2010 to 2018, export prices failed to regain their momentum.

There were significant differences in the average prices for the major foreign markets. In 2018, the country with the highest price was Germany ($X per unit), while the average price for exports to Saudi Arabia ($X per unit) was amongst the lowest.

From 2007 to 2018, the most notable rate of growth in terms of prices was recorded for supplies to South Korea, while the prices for the other major destinations experienced mixed trend patterns.

Imports of Machine Tools For Working Metal

Imports into Norway

In 2018, the amount of machine tools for working metal imported into Norway totaled X units, increasing by X% against the previous year. Over the period under review, machine-tool for working metal imports continue to indicate significant growth. The pace of growth appeared the most rapid in 2014 with an increase of X% against the previous year. In that year, machine-tool for working metal imports attained their peak of X units. From 2015 to 2018, the growth of machine-tool for working metal imports remained at a somewhat lower figure.

In value terms, machine-tool for working metal imports stood at $X in 2018. In general, machine-tool for working metal imports continue to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2008 when imports increased by X% year-to-year. In that year, machine-tool for working metal imports attained their peak of $X. From 2009 to 2018, the growth of machine-tool for working metal imports failed to regain its momentum.

Imports by Country

In 2018, China (X units) constituted the largest machine-tool for working metal supplier to Norway, accounting for a X% share of total imports. Moreover, machine-tool for working metal imports from China exceeded the figures recorded by the second-largest supplier, Germany (X units), fourfold. Italy (X units) ranked third in terms of total imports with a X% share.

From 2007 to 2018, the average annual growth rate of volume from China stood at +X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (-X% per year) and Italy (+X% per year).

In value terms, the largest machine-tool for working metal suppliers to Norway were Germany ($X), Italy ($X) and Denmark ($X), together accounting for X% of total imports. Sweden, Turkey, China, the UK, the U.S., Spain, Poland and Taiwan, Chinese lagged somewhat behind, together accounting for a further X terms of the main suppliers, China experienced the highest growth rate of imports, over the last eleven years, while the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2018, the average machine-tool for working metal import price amounted to $X per unit, rising by X% against the previous year. Over the period under review, the machine-tool for working metal import price, however, continues to indicate a noticeable downturn. The growth pace was the most rapid in 2008 when the average import price increased by X% y-o-y. In that year, the average import prices for machine tools for working metal attained their peak level of $X per unit. From 2009 to 2018, the growth in terms of the average import prices for machine tools for working metal remained at a somewhat lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2018, the country with the highest price was Turkey ($X per unit), while the price for Taiwan, Chinese ($X per unit) was amongst the lowest.

From 2007 to 2018, the most notable rate of growth in terms of prices was attained by Germany, while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox AI Platform

Product coverage:
• Prodcom 28413120 - Numerically controlled bending, folding, straightening or flattening machines for working flat metal products (including presses)
• Prodcom 28413140 - Numerically controlled bending, folding, straightening or flattening machines for working metal (including presses) (excluding those for working flat metal products)
• Prodcom 28413160 - Non-numerically controlled bending, folding, straightening or flattening machines for working flat metal products (including presses)
• Prodcom 28413180 - Non-numerically controlled bending, folding, straightening or flattening machines for working metal (including presses) (excluding those for working flat metal products)
• Prodcom 28413220 - Numerically controlled shearing machines for working metal (including presses) (excluding combined punching and shearing machines)
• Prodcom 28413240 - Numerically controlled punching or notching machines for working metal (including presses, combined punching and shearing machines)
• Prodcom 28413260 - Non-numerically controlled shearing machines for working metal (including presses) (excluding combined punching and shearing machines)
• Prodcom 28413280 - Non-numerically controlled punching or notching machines for working metal (including presses, combined punching and shearing machines)
• Prodcom 28413310 - Numerically controlled forging or die-stamping machines and hammers for working metal (including presses)
• Prodcom 28413320 - Non-numerically controlled forging or die-stamping machines and hammers for working metal (including presses)
• Prodcom 28413330 -
• Prodcom 28413340 -
• Prodcom 28413370 -
• Prodcom 28413380 -

This report provides an in-depth analysis of the market for machine-tool for working metal in Norway. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.


Country coverage:
• Norway

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in Norway
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1
KEY FINDINGS
2.2
MARKET TRENDS
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2007–2018
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2007–2018
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2018
Table 2:
Market Volume, In Physical Terms, 2007–2018
Table 3:
Market Value, 2007–2018
Table 4:
Per Capita Consumption In 2007–2018
Table 5:
Imports, In Physical Terms, By Country, 2007–2018
Table 6:
Imports, In Value Terms, By Country, 2007–2018
Table 7:
Import Prices, By Country Of Origin, 2007–2018
Table 8:
Exports, In Physical Terms, By Country, 2007–2018
Table 9:
Exports, In Value Terms, By Country, 2007–2018
Table 10:
Export Prices, By Country Of Destination, 2007–2018
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2007–2018
Figure 2:
Market Value, 2007–2018
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007–2018
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007–2018
Figure 5:
Trade Balance, In Physical Terms, 2007–2018
Figure 6:
Trade Balance, In Value Terms, 2007–2018
Figure 7:
Per Capita Consumption, 2007–2018
Figure 8:
Market Forecast To 2025
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2007–2018
Figure 21:
Production, In Value Terms, 2007–2018
Figure 22:
Imports, In Physical Terms, 2007–2018
Figure 23:
Imports, In Value Terms, 2007–2018
Figure 24:
Imports, In Physical Terms, By Country, 2018
Figure 25:
Imports, In Physical Terms, By Country, 2007–2018
Figure 26:
Imports, In Value Terms, By Country, 2007–2018
Figure 27:
Import Prices, By Country Of Origin, 2007–2018
Figure 28:
Exports, In Physical Terms, 2007–2018
Figure 29:
Exports, In Value Terms, 2007–2018
Figure 30:
Exports, In Physical Terms, By Country, 2018
Figure 31:
Exports, In Physical Terms, By Country, 2007–2018
Figure 32:
Exports, In Value Terms, By Country, 2007–2018
Figure 33:
Export Prices, By Country Of Destination, 2007–2018

Free Webinar: How the Coronavirus Outbreak in China May Affect the Global Vegetable Market



The ongoing outbreak of coronavirus in China may affect vegetable shipments across the globe and result in a shortage of supplies, which firstly is to push the prices up. But then the question will arise: who will be able to compensate for this shortage and who will benefit from price increases?



Wednesday, March 4th, 2020 @ 10:00am ET


Register
Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data