Netherlands - Injection or Compression Type Moulds for Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingNetherlands: Compression Type Mould Market 2024
Compression Type Mould Market Size in the Netherlands
After five years of decline, the Dutch compression type mould market increased by X% to $X in 2022. Overall, consumption, however, continues to indicate a mild contraction. Compression type mould consumption peaked at $X in 2016; however, from 2017 to 2022, consumption failed to regain momentum.
Compression Type Mould Production in the Netherlands
In value terms, compression type mould production skyrocketed to $X in 2022 estimated in export price. Over the period under review, production recorded a slight increase. Compression type mould production peaked at $X in 2016; however, from 2017 to 2022, production stood at a somewhat lower figure.
Compression Type Mould Exports
Exports from the Netherlands
In 2022, compression type mould exports from the Netherlands dropped markedly to X units, which is down by X% compared with the previous year. Over the period under review, exports showed a slight curtailment. The most prominent rate of growth was recorded in 2019 when exports increased by X%. As a result, the exports reached the peak of X units. From 2020 to 2022, the growth of the exports failed to regain momentum.
In value terms, compression type mould exports amounted to $X in 2022. Overall, total exports indicated a remarkable increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 when exports increased by X%. The exports peaked in 2022 and are likely to see steady growth in the immediate term.
Exports by Country
Germany (X units), the United States (X units) and the UK (X units) were the main destinations of compression type mould exports from the Netherlands, together accounting for X% of total exports. Ireland, Switzerland, Australia, China, the Czech Republic, Turkey, Russia, Portugal and Denmark lagged somewhat behind, together accounting for a further X%.
From 2012 to 2022, the biggest increases were recorded for Ireland (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the largest markets for compression type mould exported from the Netherlands were Germany ($X), the United States ($X) and the UK ($X), with a combined X% share of total exports. Ireland, the Czech Republic, Switzerland, China, Turkey, Australia, Russia, Portugal and Denmark lagged somewhat behind, together accounting for a further X%.
Ireland, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2022, the average compression type mould export price amounted to $X per unit, rising by X% against the previous year. In general, the export price saw buoyant growth. The pace of growth appeared the most rapid in 2014 an increase of X%. Over the period under review, the average export prices attained the maximum in 2022 and is likely to continue growth in the immediate term.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Denmark ($X per unit), while the average price for exports to the United States ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Denmark (X%), while the prices for the other major destinations experienced more modest paces of growth.
Compression Type Mould Imports
Imports into the Netherlands
In 2022, supplies from abroad of injection or compression type moulds for rubber or plastics was finally on the rise to reach X units after two years of decline. In general, imports, however, continue to indicate a abrupt decline. The pace of growth was the most pronounced in 2019 with an increase of X% against the previous year. As a result, imports reached the peak of X units. From 2020 to 2022, the growth of imports failed to regain momentum.
In value terms, compression type mould imports fell to $X in 2022. Over the period under review, total imports indicated measured growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2013 indices. The most prominent rate of growth was recorded in 2015 when imports increased by X%. Over the period under review, imports reached the peak figure at $X in 2021, and then shrank in the following year.
Imports by Country
In 2022, China (X units) constituted the largest compression type mould supplier to the Netherlands, with a X% share of total imports. Moreover, compression type mould imports from China exceeded the figures recorded by the second-largest supplier, Germany (X units), sixfold. Japan (X units) ranked third in terms of total imports with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume from China amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (X% per year) and Japan (X% per year).
In value terms, China ($X) constituted the largest supplier of injection or compression type moulds for rubber or plastics to the Netherlands, comprising X% of total imports. The second position in the ranking was held by Germany ($X), with a X% share of total imports. It was followed by Switzerland, with a X% share.
From 2012 to 2022, the average annual growth rate of value from China totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (X% per year) and Switzerland (X% per year).
Import Prices by Country
In 2022, the average compression type mould import price amounted to $X per unit, falling by X% against the previous year. Over the period under review, the import price, however, continues to indicate resilient growth. The growth pace was the most rapid in 2020 when the average import price increased by X%. Over the period under review, average import prices hit record highs at $X per unit in 2021, and then shrank sharply in the following year.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Belgium ($X per unit), while the price for Japan ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Germany (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the compression type mould market in the Netherlands. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735070 - Injection or compression type moulds for rubber or plastics
Country coverage:
- Netherlands
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in the Netherlands
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the compression type mould market in Asia.
This report provides an in-depth analysis of the compression type mould market in the U.S..
This report provides an in-depth analysis of the compression type mould market in China.
This report provides an in-depth analysis of the compression type mould market in the EU.
This report provides an in-depth analysis of the global compression type mould market.