Netherlands - Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingNetherlands: Market for Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips 2024
Market Size for Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips in the Netherlands
The Dutch market for unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips surged to $X in 2022, growing by X% against the previous year. Over the period under review, consumption saw a prominent expansion. As a result, consumption attained the peak level and is likely to continue growth in the immediate term.
Production of Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips in the Netherlands
In value terms, production of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips skyrocketed to $X in 2022 estimated in export price. In general, production saw significant growth. The pace of growth appeared the most rapid in 2020 with an increase of X%. As a result, production reached the peak level of $X. From 2021 to 2022, production of growth remained at a lower figure.
Need help with your exports to Netherlands?
Chat with our expert for a free 30-minute consultation.
No obligations, just pure guidance.
Exports of Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips
Exports from the Netherlands
In 2022, shipments abroad of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips increased by X% to X tons, rising for the third year in a row after three years of decline. In general, exports enjoyed a strong expansion. The most prominent rate of growth was recorded in 2020 with an increase of X%. Over the period under review, the exports of reached the maximum in 2022 and are likely to see gradual growth in the immediate term.
In value terms, exports of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips dropped modestly to $X in 2022. Overall, exports showed a mild increase. The growth pace was the most rapid in 2020 when exports increased by X% against the previous year. Over the period under review, the exports of hit record highs at $X in 2021, and then reduced modestly in the following year.
Exports by Country
Germany (X tons) was the main destination for exports of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips from the Netherlands, with a X% share of total exports. Moreover, exports of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips to Germany exceeded the volume sent to the second major destination, Italy (X tons), threefold. The UK (X tons) ranked third in terms of total exports with a X% share.
From 2012 to 2022, the average annual growth rate of volume to Germany stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Italy (X% per year) and the UK (X% per year).
In value terms, the largest markets for unmounted tool inserts, sticks or plates exported from the Netherlands were Germany ($X), Italy ($X) and China ($X), with a combined X% share of total exports.
Among the main countries of destination, China, with a CAGR of X%, recorded the highest growth rate of the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average export price for unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips stood at $X per ton in 2022, with a decrease of X% against the previous year. Overall, the export price showed a abrupt slump. The most prominent rate of growth was recorded in 2017 when the average export price increased by X% against the previous year. The export price peaked at $X per ton in 2013; however, from 2014 to 2022, the export prices failed to regain momentum.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was the United States ($X per ton), while the average price for exports to Germany ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to China (X%), while the prices for the other major destinations experienced a decline.
Imports of Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips
Imports into the Netherlands
For the fifth consecutive year, the Netherlands recorded growth in supplies from abroad of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips, which increased by X% to X tons in 2022. Over the period under review, imports enjoyed a remarkable increase. The growth pace was the most rapid in 2020 when imports increased by X%. Imports peaked in 2022 and are likely to continue growth in the immediate term.
In value terms, imports of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips totaled $X in 2022. In general, imports, however, saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2020 when imports increased by X%. Over the period under review, imports of reached the maximum at $X in 2014; however, from 2015 to 2022, imports failed to regain momentum.
Imports by Country
Germany (X tons), Japan (X tons) and Sweden (X tons) were the main suppliers of imports of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips to the Netherlands, with a combined X% share of total imports. China, the Czech Republic, India, the United States, France, the UK and Brazil lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by the Czech Republic (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest unmounted tool inserts, sticks or plates suppliers to the Netherlands were Sweden ($X), Germany ($X) and Japan ($X), together accounting for X% of total imports. The Czech Republic, the United States, China, India, France, the UK and Brazil lagged somewhat behind, together comprising a further X%.
The Czech Republic, with a CAGR of X%, saw the highest growth rate of the value of imports, among the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average import price for unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips stood at $X per ton in 2022, reducing by X% against the previous year. Over the period under review, the import price showed a deep downturn. The pace of growth appeared the most rapid in 2020 when the average import price increased by X% against the previous year. Over the period under review, average import prices hit record highs at $X per ton in 2013; however, from 2014 to 2022, import prices failed to regain momentum.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Sweden ($X per ton), while the price for Japan ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Brazil (X%), while the prices for the other major suppliers experienced a decline.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in the Netherlands. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25736067 - Indexable inserts for tools, unmounted, of sintered metal carbides and cermets
- Prodcom 25736090 - Unmounted sintered metal carbides or cermet plates, sticks, t ips and the like for tools (excluding indexable inserts)
Country coverage:
- Netherlands
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in the Netherlands
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in Asia.
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in the U.S..
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in China.
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in the EU.
This report provides an in-depth analysis of the global market for unmounted tool inserts, sticks or plates.