Malaysia - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingMalaysia: Market for Rubber-to-Metal and Moulded Articles 2024
Market Size for Rubber-to-Metal and Moulded Articles in Malaysia
The Malaysian rubber-to-metal and moulded article market stood at $X in 2022, surging by X% against the previous year. Overall, consumption, however, saw a relatively flat trend pattern. As a result, consumption attained the peak level of $X. From 2018 to 2022, the growth of the market remained at a lower figure.
Production of Rubber-to-Metal and Moulded Articles in Malaysia
In value terms, rubber-to-metal and moulded article production expanded to $X in 2022 estimated in export price. Over the period under review, production, however, recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 when the production volume increased by X%. Rubber-to-metal and moulded article production peaked at $X in 2012; however, from 2013 to 2022, production stood at a somewhat lower figure.
Exports of Rubber-to-Metal and Moulded Articles
Exports from Malaysia
In 2022, shipments abroad of rubber-to-metal and moulded articles increased by X% to X tons, rising for the fifth consecutive year after three years of decline. The total export volume increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2014 with an increase of X%. The exports peaked in 2022 and are expected to retain growth in the near future.
In value terms, rubber-to-metal and moulded article exports expanded rapidly to $X in 2022. Over the period under review, exports recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2014 with an increase of X% against the previous year. The exports peaked in 2022 and are likely to continue growth in the near future.
Exports by Country
The United States (X tons), Japan (X tons) and Singapore (X tons) were the main destinations of rubber-to-metal and moulded article exports from Malaysia, with a combined X% share of total exports. China, Thailand, Peru, Australia, Indonesia, India, Germany, Italy, the UK and Vietnam lagged somewhat behind, together accounting for a further X%.
From 2012 to 2022, the biggest increases were recorded for Peru (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the United States ($X), Singapore ($X) and Japan ($X) constituted the largest markets for rubber-to-metal and moulded article exported from Malaysia worldwide, together accounting for X% of total exports. China, Thailand, Peru, India, Germany, Indonesia, Australia, the UK, Vietnam and Italy lagged somewhat behind, together accounting for a further X%.
Peru, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2022, the average rubber-to-metal and moulded article export price amounted to $X per ton, flattening at the previous year. Overall, the export price, however, showed a perceptible reduction. The pace of growth appeared the most rapid in 2018 when the average export price increased by X% against the previous year. Over the period under review, the average export prices reached the peak figure at $X per ton in 2012; however, from 2013 to 2022, the export prices stood at a somewhat lower figure.
There were significant differences in the average prices for the major external markets. In 2022, amid the top suppliers, the country with the highest price was Singapore ($X per ton), while the average price for exports to Italy ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to China (X%), while the prices for the other major destinations experienced mixed trend patterns.
Imports of Rubber-to-Metal and Moulded Articles
Imports into Malaysia
In 2022, imports of rubber-to-metal and moulded articles into Malaysia skyrocketed to X tons, growing by X% compared with the previous year. Over the period under review, total imports indicated perceptible growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. As a result, imports attained the peak and are likely to continue growth in the immediate term.
In value terms, rubber-to-metal and moulded article imports amounted to $X in 2022. Overall, imports continue to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2019 with an increase of X%. As a result, imports reached the peak of $X. From 2020 to 2022, the growth of imports failed to regain momentum.
Imports by Country
China (X tons), Thailand (X tons) and Indonesia (X tons) were the main suppliers of rubber-to-metal and moulded article imports to Malaysia, together comprising X% of total imports. Japan, Germany, Vietnam, the United States, Singapore, South Korea, Sweden, Taiwan (Chinese) and Hong Kong SAR lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the biggest increases were recorded for Sweden (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, China ($X), Thailand ($X) and Japan ($X) appeared to be the largest rubber-to-metal and moulded article suppliers to Malaysia, with a combined X% share of total imports. The United States, Indonesia, Germany, Singapore, South Korea, Taiwan (Chinese), Vietnam, Sweden and Hong Kong SAR lagged somewhat behind, together accounting for a further X%.
Sweden, with a CAGR of X%, saw the highest growth rate of the value of imports, in terms of the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the average rubber-to-metal and moulded article import price amounted to $X per ton, falling by X% against the previous year. Over the period under review, the import price saw a mild decrease. The most prominent rate of growth was recorded in 2018 when the average import price increased by X%. The import price peaked at $X per ton in 2019; however, from 2020 to 2022, import prices failed to regain momentum.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Japan ($X per ton), while the price for Vietnam ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by South Korea (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Malaysia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
- Malaysia
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Malaysia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU.
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article.
- Price for Rubber-To-Metal and Moulded Article Malaysia
- Rubber-to-metal and Moulded Article Market
- Reclaimed Rubber Market
- Unvulcanised Rubber Market
- Vulcanised Rubber Thread Market
- Extruded Rod Market
- Solid Vulcanised Rubber Sheet Market
- Extruded Solid Rubber Rod Market
- Non-reinforced Rubber Tubing Market
- Metal-reinforced Rubber Hose Market