Malaysia - Machine Tools for Working Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingMalaysia: Market for Machine Tools For Working Metal 2024
Market Size for Machine Tools For Working Metal in Malaysia
The Malaysian machine-tool for working metal market soared to $X in 2022, rising by X% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). In general, consumption, however, showed a relatively flat trend pattern. Over the period under review, the market hit record highs at $X in 2012; however, from 2013 to 2022, consumption stood at a somewhat lower figure.
Exports of Machine Tools For Working Metal
Exports from Malaysia
In 2022, the amount of machine tools for working metal exported from Malaysia shrank to X units, with a decrease of X% on the previous year. Over the period under review, exports continue to indicate a deep contraction. The pace of growth was the most pronounced in 2021 when exports increased by X%. Over the period under review, the exports attained the peak figure at X units in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.
In value terms, machine-tool for working metal exports declined significantly to $X in 2022. Overall, exports saw a noticeable decline. The pace of growth appeared the most rapid in 2021 with an increase of X%. As a result, the exports attained the peak of $X, and then contracted notably in the following year.
Exports by Country
Singapore (X units), the United States (X units) and India (X units) were the main destinations of machine-tool for working metal exports from Malaysia, with a combined X% share of total exports. The Philippines, Thailand, Indonesia, China, Vietnam, Mexico, Germany and Australia lagged somewhat behind, together accounting for a further X%.
From 2012 to 2022, the biggest increases were recorded for Mexico (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the largest markets for machine-tool for working metal exported from Malaysia were Thailand ($X), China ($X) and the United States ($X), with a combined X% share of total exports. Singapore, India, Mexico, Indonesia, the Philippines, Vietnam, Germany and Australia lagged somewhat behind, together comprising a further X%.
Mexico, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average machine-tool for working metal export price stood at $X per unit in 2022, falling by X% against the previous year. Over the period under review, the export price, however, recorded a noticeable increase. The most prominent rate of growth was recorded in 2020 when the average export price increased by X%. As a result, the export price reached the peak level of $X per unit. From 2021 to 2022, the average export prices remained at a somewhat lower figure.
There were significant differences in the average prices for the major export markets. In 2022, amid the top suppliers, the country with the highest price was China ($X per unit), while the average price for exports to Australia ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Thailand (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Machine Tools For Working Metal
Imports into Malaysia
Machine-tool for working metal imports into Malaysia soared to X units in 2022, picking up by X% compared with the previous year. Overall, imports continue to indicate measured growth. The growth pace was the most rapid in 2021 when imports increased by X%. Over the period under review, imports reached the maximum in 2022 and are likely to continue growth in years to come.
In value terms, machine-tool for working metal imports totaled $X in 2022. In general, imports, however, recorded a abrupt shrinkage. The most prominent rate of growth was recorded in 2021 when imports increased by X% against the previous year. Imports peaked at $X in 2012; however, from 2013 to 2022, imports stood at a somewhat lower figure.
Imports by Country
In 2022, China (X units) constituted the largest supplier of machine-tool for working metal to Malaysia, accounting for a X% share of total imports. Moreover, machine-tool for working metal imports from China exceeded the figures recorded by the second-largest supplier, Taiwan (Chinese) (X units), tenfold. Japan (X units) ranked third in terms of total imports with a X% share.
From 2012 to 2022, the average annual growth rate of volume from China amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Taiwan (Chinese) (X% per year) and Japan (X% per year).
In value terms, China ($X) constituted the largest supplier of machine tools for working metal to Malaysia, comprising X% of total imports. The second position in the ranking was held by Japan ($X), with a X% share of total imports. It was followed by Taiwan (Chinese), with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value from China was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (X% per year) and Taiwan (Chinese) (X% per year).
Import Prices by Country
In 2022, the average machine-tool for working metal import price amounted to $X per unit, waning by X% against the previous year. Overall, the import price saw a abrupt descent. The pace of growth appeared the most rapid in 2016 an increase of X% against the previous year. The import price peaked at $X per unit in 2017; however, from 2018 to 2022, import prices failed to regain momentum.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Germany ($X per unit), while the price for Spain ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Japan (X%), while the prices for the other major suppliers experienced a decline.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for machine-tool for working metal in Malaysia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28413120 - Numerically controlled bending, folding, straightening or flattening machines for working flat metal products (including presses)
- Prodcom 28413140 - Numerically controlled bending, folding, straightening or flattening machines for working metal (including presses) (excluding those for working flat metal products)
- Prodcom 28413160 - Non-numerically controlled bending, folding, straightening or flattening machines for working flat metal products (including presses)
- Prodcom 28413180 - Non-numerically controlled bending, folding, straightening or flattening machines for working metal (including presses) (excluding those for working flat metal products)
- Prodcom 28413220 - Numerically controlled shearing machines for working metal (including presses) (excluding combined punching and shearing machines)
- Prodcom 28413240 - Numerically controlled punching or notching machines for working metal (including presses, combined punching and shearing machines)
- Prodcom 28413260 - Non-numerically controlled shearing machines for working metal (including presses) (excluding combined punching and shearing machines)
- Prodcom 28413280 - Non-numerically controlled punching or notching machines for working metal (including presses, combined punching and shearing machines)
- Prodcom 28413310 - Numerically controlled forging or die-stamping machines and hammers for working metal (including presses)
- Prodcom 28413320 - Non-numerically controlled forging or die-stamping machines and hammers for working metal (including presses)
- Prodcom 28413330 -
- Prodcom 28413340 -
- Prodcom 28413370 -
- Prodcom 28413380 -
Country coverage:
- Malaysia
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Malaysia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for machine-tool for working metal in Asia.
This report provides an in-depth analysis of the market for machine-tool for working metal in the U.S..
This report provides an in-depth analysis of the market for machine-tool for working metal in China.
This report provides an in-depth analysis of the market for machine-tool for working metal in the EU.
This report provides an in-depth analysis of the global market for machine-tool for working metal.
- Price for Machine-Tool for Working Metal Malaysia
- Machine-tool for Working Metal Market
- Cold Metal-rolling Mill Market
- Mill Rolling Roll Market
- Machine-tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-station Transfer Machine Market
- Lathe for Removing Metal Market
- Non-numerically Controlled Lathe Market