Latin America and the Caribbean - Mining Machinery - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingLatin America and the Caribbean: Market for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids 2024
Market Size for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in Latin America and the Caribbean
The Latin American market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids rose rapidly to $X in 2022, picking up by X% against the previous year. Over the period under review, consumption, however, saw a noticeable descent. The level of consumption peaked at $X in 2013; however, from 2014 to 2022, consumption remained at a lower figure.
Production of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in Latin America and the Caribbean
In value terms, production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids reached $X in 2022 estimated in export price. In general, production, however, recorded a abrupt slump. The pace of growth appeared the most rapid in 2018 with an increase of X%. Over the period under review, production of reached the maximum level at $X in 2012; however, from 2013 to 2022, production remained at a lower figure.
Exports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids
Exports in Latin America and the Caribbean
In 2022, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in Latin America and the Caribbean was estimated at X units, increasing by X% compared with the year before. In general, exports recorded a strong expansion. The most prominent rate of growth was recorded in 2013 with an increase of X%. Over the period under review, the exports of reached the maximum in 2022 and are likely to see steady growth in the immediate term.
In value terms, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids soared to $X in 2022. Over the period under review, exports, however, continue to indicate a perceptible setback. The most prominent rate of growth was recorded in 2017 when exports increased by X%. Over the period under review, the exports of reached the peak figure at $X in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.
Exports by Country
Bolivia was the major exporter of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in Latin America and the Caribbean, with the volume of exports resulting at X units, which was near X% of total exports in 2022. Mexico (X units) held a X% share (based on physical terms) of total exports, which put it in second place, followed by Brazil (X%). Chile (X units) and Argentina (X units) followed a long way behind the leaders.
From 2012 to 2022, the biggest increases were recorded for Bolivia (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Brazil ($X) remains the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids supplier in Latin America and the Caribbean, comprising X% of total exports. The second position in the ranking was taken by Mexico ($X), with a X% share of total exports. It was followed by Chile, with a X% share.
In Brazil, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids shrank by an average annual rate of X% over the period from 2012-2022. The remaining exporting countries recorded the following average annual rates of exports growth: Mexico (X% per year) and Chile (X% per year).
Export Prices by Country
In 2022, the export price in Latin America and the Caribbean amounted to $X per unit, increasing by X% against the previous year. In general, the export price, however, showed a deep reduction. The most prominent rate of growth was recorded in 2015 when the export price increased by X% against the previous year. The level of export peaked at $X per unit in 2012; however, from 2013 to 2022, the export prices remained at a lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Brazil ($X per unit), while Bolivia ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Chile (X%), while the other leaders experienced a decline in the export price figures.
Imports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids
Imports in Latin America and the Caribbean
Imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids rose sharply to X units in 2022, with an increase of X% on the previous year. Overall, imports showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, imports of reached the peak figure in 2022 and are likely to see gradual growth in years to come.
In value terms, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids soared to $X in 2022. Over the period under review, imports, however, saw a abrupt descent. The most prominent rate of growth was recorded in 2021 when imports increased by X%. Over the period under review, imports of reached the peak figure at $X in 2012; however, from 2013 to 2022, imports remained at a lower figure.
Imports by Country
In 2022, Mexico (X units), distantly followed by the Dominican Republic (X units), Chile (X units) and Brazil (X units) were the major importers of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids, together generating X% of total imports. Peru (X units), Colombia (X units), Guatemala (X units), Bolivia (X units), Argentina (X units), Jamaica (X units), Paraguay (X units), Guyana (X units) and El Salvador (X units) followed a long way behind the leaders.
From 2012 to 2022, the biggest increases were recorded for Jamaica (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids importing markets in Latin America and the Caribbean were Mexico ($X), Chile ($X) and Brazil ($X), together comprising X% of total imports. The Dominican Republic, Peru, Argentina, Colombia, Bolivia, Guatemala, El Salvador, Paraguay, Guyana and Jamaica lagged somewhat behind, together accounting for a further X%.
El Salvador, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, in terms of the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Latin America and the Caribbean stood at $X per unit in 2022, with an increase of X% against the previous year. Overall, the import price, however, continues to indicate a abrupt shrinkage. The pace of growth was the most pronounced in 2016 an increase of X% against the previous year. As a result, import price attained the peak level of $X per unit. From 2017 to 2022, the import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Argentina ($X per unit), while Jamaica ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by El Salvador (X%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in Latin America and the Caribbean. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28924030 - Sorting, screening, separating, washing machines, crushing, g rinding, mixing, kneading machines excluding concrete/mortar mixers, machines for mixing mineral substances with bitumen
- Prodcom 28924050 - Concrete or mortar mixers
- Prodcom 28924070 - Machines for mixing mineral substances with bitumen
- Prodcom 28993953 - Other machinery for earth, stone, ores, etc., n.e.c.
Country coverage:
- Anguilla
- Antigua and Barbuda
- Argentina
- Aruba
- Bahamas
- Barbados
- Belize
- Bolivia
- Brazil
- British Virgin Islands
- Cayman Islands
- Chile
- Colombia
- Costa Rica
- Cuba
- Curacao
- Dominica
- Dominican Republic
- Ecuador
- El Salvador
- Falkland Islands (Malvinas)
- French Guiana
- Grenada
- Guadeloupe
- Guatemala
- Guyana
- Haiti
- Honduras
- Jamaica
- Martinique
- Mexico
- Montserrat
- Nicaragua
- Panama
- Paraguay
- Peru
- Puerto Rico
- Saint Kitts and Nevis
- Saint Lucia
- Saint Maarten (Dutch part)
- Saint Vincent and the Grenadines
- Suriname
- Trinidad and Tobago
- Turks and Caicos Islands
- United States Virgin Islands
- Uruguay
- Venezuela
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Latin America and the Caribbean, split by region and country
- Trade (exports and imports) in Latin America and the Caribbean
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Anguilla
- Antigua and Barbuda
- Argentina
- Aruba
- Bahamas
- Barbados
- Belize
- Bolivia
- Brazil
- British Virgin Islands
- Cayman Islands
- Chile
- Colombia
- Costa Rica
- Cuba
- Curacao
- Dominica
- Dominican Republic
- Ecuador
- El Salvador
- Falkland Islands (Malvinas)
- French Guiana
- Grenada
- Guadeloupe
- Guatemala
- Guyana
- Haiti
- Honduras
- Jamaica
- Martinique
- Mexico
- Montserrat
- Nicaragua
- Panama
- Paraguay
- Peru
- Saint Kitts and Nevis
- Saint Lucia
- Saint Vincent and the Grenadines
- Saint Maarten (Dutch part)
- Suriname
- Trinidad and Tobago
- Turks and Caicos Islands
- United States Virgin Islands
- Uruguay
- Venezuela
- Puerto Rico
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in Asia.
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the U.S..
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in China.
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the EU.
This report provides an in-depth analysis of the global market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids.