Latest Report Update: Sep 25, 2021

Ireland - Transmission Shafts And Cranks, Bearing Housings And Plain Shaft Bearings, Gears And Gearing And Articulated Link Chain - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Licenses

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service, Privacy Policy and Licenses. We'll occasionally send you account related emails.

Ireland: Transmission Shaft Market Overview 2021

Transmission Shaft Market Size in Ireland

In 2020, after two years of growth, there was significant decline in the Irish transmission shaft market, when its value decreased by -X% to $X. Over the period under review, the total consumption indicated moderate growth from 2007 to 2020: its value increased at an average annual rate of +X% over the last thirteen years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, consumption increased by +X% against 2015 indices. The most prominent rate of growth was recorded in 2013 with an increase of X% y-o-y. Transmission shaft consumption peaked at $X in 2019, and then reduced in the following year.

Transmission Shaft Production in Ireland

In value terms, transmission shaft production declined significantly to $X in 2020 estimated in export prices. In general, production continues to indicate a noticeable contraction. The most prominent rate of growth was recorded in 2014 with an increase of X% year-to-year. As a result, production reached the peak level of $X. from 2015 to 2020, production growth failed to regain the momentum.

Transmission Shaft Exports

Exports from Ireland

In 2020, transmission shaft exports from Ireland soared to X tonnes, with an increase of X% on the previous year. In general, exports saw a relatively flat trend pattern. The growth pace was the most rapid in 2018 when exports increased by X% y-o-y. Over the period under review, exports attained the maximum in 2020 and are likely to continue growth in the near future.

In value terms, transmission shaft exports skyrocketed to $X in 2020. Overall, total exports indicated a moderate increase from 2007 to 2020: its value increased at an average annual rate of +X% over the last thirteen years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, exports increased by +X% against 2014 indices. The pace of growth appeared the most rapid in 2009 when exports increased by X% y-o-y. Over the period under review, exports reached the maximum in 2020 and are expected to retain growth in years to come.

Exports by Country

The UK (X tonnes), South Africa (X tonnes) and the U.S. (X tonnes) were the main destinations of transmission shaft exports from Ireland, together comprising X% of total exports. These countries were followed by Saudi Arabia, Germany, the Netherlands, Austria, France, Denmark, China and Spain, which together accounted for a further X 2007 to 2020, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by China, while exports for the other leaders experienced more modest paces of growth.

In value terms, the largest markets for transmission shaft exported from Ireland were the UK ($X), the U.S. ($X) and Germany ($X), together comprising X% of total exports. These countries were followed by France, the Netherlands, Spain, Saudi Arabia, Austria, South Africa, China and Denmark, which together accounted for a further X recorded the highest growth rate of the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The average transmission shaft export price stood at $X per tonne in 2020, which is down by -X% against the previous year. Over the period under review, export price indicated a measured increase from 2007 to 2020: its price increased at an average annual rate of +X% over the last thirteen-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, transmission shaft export price decreased by +X% against 2018 indices. The pace of growth was the most pronounced in 2008 an increase of X% against the previous year. The export price peaked at $X per tonne in 2017; however, from 2018 to 2020, export prices failed to regain the momentum.

Prices varied noticeably by the country of destination; the country with the highest price was Spain ($X per tonne), while the average price for exports to South Africa ($X per tonne) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was recorded for supplies to Germany, while the prices for the other major destinations experienced more modest paces of growth.

Transmission Shaft Imports

Imports into Ireland

In 2020, after two years of growth, there was significant decline in supplies from abroad of transmission shafts and cranks, bearing housings and plain shaft bearings, gears and gearing and articulated link chain, when their volume decreased by -X% to X tonnes. In general, imports recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2013 with an increase of X% y-o-y. Over the period under review, imports hit record highs at X tonnes in 2019, and then declined remarkably in the following year.

In value terms, transmission shaft imports fell significantly to $X in 2020. Overall, imports showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2013 when imports increased by X% year-to-year. Imports peaked at $X in 2019, and then reduced rapidly in the following year.

Imports by Country

The UK (X tonnes), Germany (X tonnes) and China (X tonnes) were the main suppliers of transmission shaft imports to Ireland, together comprising X% of total imports. Italy, France, Poland and Turkey lagged somewhat behind, together comprising a further X 2007 to 2020, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Turkey, while imports for the other leaders experienced more modest paces of growth.

In value terms, the UK ($X), Germany ($X) and France ($X) were the largest transmission shaft suppliers to Ireland, together comprising X% of total imports. China, Italy, Poland and Turkey lagged somewhat behind, together comprising a further X saw the highest growth rate of the value of imports, among the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2020, the average transmission shaft import price amounted to $X per tonne, surging by X% against the previous year. Overall, the import price recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2009 an increase of X% y-o-y. Over the period under review, average import prices reached the maximum at $X per tonne in 2014; however, from 2015 to 2020, import prices failed to regain the momentum.

Prices varied noticeably by the country of origin; the country with the highest price was France ($X per tonne), while the price for China ($X per tonne) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was attained by Turkey, while the prices for the other major suppliers experienced mixed trend patterns.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for transmission shafts and cranks, bearing housings and plain shaft bearings, gears and gearing and articulated link chain in the world?
+
China (2M tonnes) remains the largest transmission shaft consuming country worldwide, comprising approx. 28% of total volume. Moreover, transmission shaft consumption in China exceeded the figures recorded by the second-largest consumer, the U.S. (932K tonnes), twofold. The third position in this ranking was occupied by Germany (643K tonnes), with a 8.8% share.
What are the largest producers of transmission shafts and cranks, bearing housings and plain shaft bearings, gears and gearing and articulated link chain in the world?
+
The country with the largest volume of transmission shaft production was China (2.8M tonnes), accounting for 39% of total volume. Moreover, transmission shaft production in China exceeded the figures recorded by the second-largest producer, Germany (879K tonnes), threefold. Japan (546K tonnes) ranked third in terms of total production with a 7.6% share.
What are the leading suppliers of transmission shafts and cranks, bearing housings and plain shaft bearings, gears and gearing and articulated link chain to Ireland?
+
In value terms, the largest transmission shaft suppliers to Ireland were the UK ($11M), Germany ($9.1M) and France ($5.9M), with a combined 52% share of total imports. These countries were followed by China, Italy, Poland and Turkey, which together accounted for a further 26%.
What are the leading importers of transmission shafts and cranks, bearing housings and plain shaft bearings, gears and gearing and articulated link chain from Ireland?
+
In value terms, the UK ($5.6M), the U.S. ($3M) and Germany ($2M) were the largest markets for transmission shaft exported from Ireland worldwide, together comprising 42% of total exports. France, the Netherlands, Spain, Saudi Arabia, Austria, South Africa, China and Denmark lagged somewhat behind, together accounting for a further 30%.
What is the average export price for transmission shafts and cranks, bearing housings and plain shaft bearings, gears and gearing and articulated link chain in Ireland?
+
The average transmission shaft export price stood at $18,467 per tonne in 2020, which is down by -2.6% against the previous year.
What is the average import price for transmission shafts and cranks, bearing housings and plain shaft bearings, gears and gearing and articulated link chain in Ireland?
+
In 2020, the average transmission shaft import price amounted to $13,480 per tonne, surging by 5% against the previous year.

Product coverage:
• Prodcom 28152130 - Iron or steel roller chain of a kind used for cycles and motor cycles
• Prodcom 28152150 - Iron or steel roller chain (excluding of a kind used for cycles or motor-cycles)
• Prodcom 28152170 - Iron or steel articulated link chain (excluding roller chain)
• Prodcom 28152230 - Cranks and crankshafts
• Prodcom 28152250 - Cardan shafts
• Prodcom 28152270 - Other shafts
• Prodcom 28152330 - Bearing housings incorporating ball or roller bearings
• Prodcom 28152350 - Bearing housings not incorporating ball or roller bearings, p lain shaft bearings
• Prodcom 28152432 - Gear boxes for stationary equipment, spur and helical gear boxes
• Prodcom 28152433 - Gear boxes ..., bevel and bevel/spur and helical gear boxes
• Prodcom 28152434 - Gear boxes ..., worm gear boxes
• Prodcom 28152440 - Other gear boxes
• Prodcom 28152450 - Gearboxes and other speed changers for machinery and land/sea vehicles excluding gears and gearing
• Prodcom 28152473 - Ball or roller screws
• Prodcom 28152475 - Other transmission elements (excluding gears and gearing, b all or roller screws, gearboxes and other speed changers)
• Prodcom 28152500 - Flywheels and pulleys (including pulley blocks)
• Prodcom 28152600 - Clutches and shaft couplings (including universal joints)
• Prodcom 28153930 - Parts of bearing housings
• Prodcom 28153950 - Parts of transmission, cam and crankshafts, cranks, plain shaft bearings, gears, ball/roller screws, gearboxes, torque converters, flywheels, pulleys, clutches, shaft couplings, u niversal joints

This report provides an in-depth analysis of the transmission shaft market in Ireland. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2025.


Country coverage:

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in Ireland
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1
KEY FINDINGS
2.2
MARKET TRENDS
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2007–2020
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2007–2020
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2020
Table 2:
Market Volume, In Physical Terms, 2007–2020
Table 3:
Market Value, 2007–2020
Table 4:
Per Capita Consumption In 2007–2020
Table 5:
Imports, In Physical Terms, By Country, 2007–2020
Table 6:
Imports, In Value Terms, By Country, 2007–2020
Table 7:
Import Prices, By Country Of Origin, 2007–2020
Table 8:
Exports, In Physical Terms, By Country, 2007–2020
Table 9:
Exports, In Value Terms, By Country, 2007–2020
Table 10:
Export Prices, By Country Of Destination, 2007–2020
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2007–2020
Figure 2:
Market Value, 2007–2020
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007–2020
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007–2020
Figure 5:
Trade Balance, In Physical Terms, 2007–2020
Figure 6:
Trade Balance, In Value Terms, 2007–2020
Figure 7:
Per Capita Consumption, 2007–2020
Figure 8:
Market Forecast To 2030
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2007–2020
Figure 21:
Production, In Value Terms, 2007–2020
Figure 22:
Imports, In Physical Terms, 2007–2020
Figure 23:
Imports, In Value Terms, 2007–2020
Figure 24:
Imports, In Physical Terms, By Country, 2020
Figure 25:
Imports, In Physical Terms, By Country, 2007–2020
Figure 26:
Imports, In Value Terms, By Country, 2007–2020
Figure 27:
Import Prices, By Country Of Origin, 2007–2020
Figure 28:
Exports, In Physical Terms, 2007–2020
Figure 29:
Exports, In Value Terms, 2007–2020
Figure 30:
Exports, In Physical Terms, By Country, 2020
Figure 31:
Exports, In Physical Terms, By Country, 2007–2020
Figure 32:
Exports, In Value Terms, By Country, 2007–2020
Figure 33:
Export Prices, By Country Of Destination, 2007–2020

Solar Energy Market: Getting to Net-Zero amid Energy Crisis



Join our live webinar to get insights into the global solar energy market.



Thursday, November 4th, 2021 @ 03:00 pm ET


Register

Wind Energy Market: Getting to Net-Zero amid Energy Crisis



Join our live webinar to get insights into the global wind energy market.



Thursday, November 11th, 2021 @ 04:00 pm ET


Register

Biogas Market: Getting to Net-Zero amid Energy Crisis



Join our live webinar to get insights into the global biogas market.



Thursday, November 18th, 2021 @ 04:00 pm ET


Register
Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data