Latest Report Update: Oct 9, 2021

Germany - Cement Plates, Sticks, Tips And The Like For Tools - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Licenses

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service, Privacy Policy and Licenses. We'll occasionally send you account related emails.

Germany: Overview of the Market for Unmounted Inserts for Tools, Sintered Metal Carbides or Cermet Plates, Sticks, Tips 2021

Market Size for Unmounted Inserts for Tools, Sintered Metal Carbides or Cermet Plates, Sticks, Tips in Germany

In 2020, the German market for unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips decreased by -X% to $X, falling for the second consecutive year after two years of growth. In general, consumption continues to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2017 with an increase of X% y-o-y. Over the period under review, the market attained the maximum level at $X in 2015; however, from 2016 to 2020, consumption failed to regain the momentum.

Production of Unmounted Inserts for Tools, Sintered Metal Carbides or Cermet Plates, Sticks, Tips in Germany

In value terms, production of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips shrank to $X in 2020 estimated in export prices. Overall, production, however, recorded a relatively flat trend pattern. The growth pace was the most rapid in 2010 with an increase of X% year-to-year. Production peaked at $X in 2014; however, from 2015 to 2020, production failed to regain the momentum.

Exports of Unmounted Inserts for Tools, Sintered Metal Carbides or Cermet Plates, Sticks, Tips

Exports from Germany

In 2020, overseas shipments of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips decreased by -X% to X tonnes, falling for the sixth year in a row after two years of growth. In general, exports showed a abrupt curtailment. The most prominent rate of growth was recorded in 2010 when exports increased by X% y-o-y. Over the period under review, exports hit record highs at X tonnes in 2008; however, from 2009 to 2020, exports remained at a lower figure.

In value terms, exports of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips contracted to $X in 2020. Over the period under review, total exports indicated a modest expansion from 2007 to 2020: its value decreased at an average annual rate of -X% over the last thirteen years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, exports decreased by -X% against 2018 indices. The most prominent rate of growth was recorded in 2010 with an increase of X% year-to-year. Over the period under review, exports hit record highs at $X in 2018; however, from 2019 to 2020, exports remained at a lower figure.

Exports by Country

The Netherlands (X tonnes) was the main destination for exports of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips from Germany, with a X% share of total exports. Moreover, exports of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips to the Netherlands exceeded the volume sent to the second major destination, China (X tonnes), twofold. The third position in this ranking was occupied by the U.S. (X tonnes), with a X% share.

From 2007 to 2020, the average annual rate of growth in terms of volume to the Netherlands stood at +X%. Exports to the other major destinations recorded the following average annual rates of exports growth: China (+X% per year) and the U.S. (-X% per year).

In value terms, the Netherlands ($X) emerged as the key foreign market for unmounted tool inserts, sticks or plates exports from Germany, comprising X% of total exports. The second position in the ranking was occupied by the U.S. ($X), with a X% share of total exports. It was followed by China, with a X% share.

From 2007 to 2020, the average annual rate of growth in terms of value to the Netherlands stood at +X%. Exports to the other major destinations recorded the following average annual rates of exports growth: the U.S. (+X% per year) and China (+X% per year).

Export Prices by Country

The average export price for unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips stood at $X per tonne in 2020, dropping by -X% against the previous year. In general, the export price, however, showed a remarkable increase. The pace of growth was the most pronounced in 2016 when the average export price increased by X% y-o-y. The export price peaked at $X per tonne in 2018; however, from 2019 to 2020, export prices failed to regain the momentum.

There were significant differences in the average prices for the major foreign markets. In 2020, the country with the highest price was the U.S. ($X per tonne), while the average price for exports to Luxembourg ($X per tonne) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was recorded for supplies to India, while the prices for the other major destinations experienced more modest paces of growth.

Imports of Unmounted Inserts for Tools, Sintered Metal Carbides or Cermet Plates, Sticks, Tips

Imports into Germany

In 2020, approx. X tonnes of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips were imported into Germany; dropping by -X% compared with the year before. Overall, imports recorded a noticeable contraction. The pace of growth was the most pronounced in 2010 when imports increased by X% year-to-year. Over the period under review, imports reached the peak figure at X tonnes in 2011; however, from 2012 to 2020, imports failed to regain the momentum.

In value terms, imports of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips declined markedly to $X in 2020. Over the period under review, imports continue to indicate a slight slump. The pace of growth appeared the most rapid in 2011 when imports increased by X% year-to-year. As a result, imports attained the peak of $X. from 2012 to 2020, the growth of imports failed to regain the momentum.

Imports by Country

China (X tonnes), Austria (X tonnes) and Japan (X tonnes) were the main suppliers of imports of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips to Germany, with a combined X% share of total imports. Sweden, Luxembourg, the U.S., Switzerland, South Korea, Belgium, the Netherlands, Mexico and India lagged somewhat behind, together accounting for a further X 2007 to 2020, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by the Netherlands, while imports for the other leaders experienced more modest paces of growth.

In value terms, the largest unmounted tool inserts, sticks or plates suppliers to Germany were Sweden ($X), Japan ($X) and the U.S. ($X), with a combined X% share of total imports. These countries were followed by Belgium, Austria, China, the Netherlands, Switzerland, South Korea, Luxembourg, India and Mexico, which together accounted for a further X Netherlands saw the highest rates of growth with regard to the value of imports, among the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

The average import price for unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips stood at $X per tonne in 2020, surging by X% against the previous year. Over the last thirteen-year period, it increased at an average annual rate of +X%. The most prominent rate of growth was recorded in 2011 an increase of X% y-o-y. The import price peaked at $X per tonne in 2014; however, from 2015 to 2020, import prices stood at a somewhat lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2020, the country with the highest price was Belgium ($X per tonne), while the price for Mexico ($X per tonne) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was attained by Switzerland, while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips in the world?
+
China (17K tonnes) remains the largest unmounted tool inserts, sticks or plates consuming country worldwide, accounting for 26% of total volume. Moreover, consumption of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips in China exceeded the figures recorded by the second-largest consumer, the U.S. (7.6K tonnes), twofold. India (6.6K tonnes) ranked third in terms of total consumption with a 9.9% share.
What are the largest producers of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips in the world?
+
China (24K tonnes) remains the largest unmounted tool inserts, sticks or plates producing country worldwide, comprising approx. 36% of total volume. Moreover, production of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips in China exceeded the figures recorded by the second-largest producer, Japan (5.5K tonnes), fourfold. The third position in this ranking was occupied by India (5.5K tonnes), with a 8.2% share.
What are the leading suppliers of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips to Germany?
+
In value terms, the largest unmounted tool inserts, sticks or plates suppliers to Germany were Sweden ($91M), Japan ($78M) and the U.S. ($75M), together accounting for 38% of total imports. Belgium, Austria, China, the Netherlands, Switzerland, South Korea, Luxembourg, India and Mexico lagged somewhat behind, together accounting for a further 52%.
What are the leading importers of unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips from Germany?
+
In value terms, the Netherlands ($205M) emerged as the key foreign market for unmounted tool inserts, sticks or plates exports from Germany, comprising 22% of total exports. The second position in the ranking was occupied by the U.S. ($98M), with a 11% share of total exports. It was followed by China, with a 9.8% share.
What is the average export price for unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips in Germany?
+
The average export price for unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips stood at $384,946 per tonne in 2020, shrinking by -10.8% against the previous year.
What is the average import price for unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips in Germany?
+
The average import price for unmounted inserts for tools, sintered metal carbides or cermet plates, sticks, tips stood at $315,442 per tonne in 2020, increasing by 4.4% against the previous year.

Product coverage:
• Prodcom 25736067 - Indexable inserts for tools, unmounted, of sintered metal carbides and cermets
• Prodcom 25736090 - Unmounted sintered metal carbides or cermet plates, sticks, t ips and the like for tools (excluding indexable inserts)

This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in Germany. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2025.


Country coverage:
• Germany

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in Germany
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1
KEY FINDINGS
2.2
MARKET TRENDS
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2007–2020
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2007–2020
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2020
Table 2:
Market Volume, In Physical Terms, 2007–2020
Table 3:
Market Value, 2007–2020
Table 4:
Per Capita Consumption In 2007–2020
Table 5:
Imports, In Physical Terms, By Country, 2007–2020
Table 6:
Imports, In Value Terms, By Country, 2007–2020
Table 7:
Import Prices, By Country Of Origin, 2007–2020
Table 8:
Exports, In Physical Terms, By Country, 2007–2020
Table 9:
Exports, In Value Terms, By Country, 2007–2020
Table 10:
Export Prices, By Country Of Destination, 2007–2020
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2007–2020
Figure 2:
Market Value, 2007–2020
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007–2020
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007–2020
Figure 5:
Trade Balance, In Physical Terms, 2007–2020
Figure 6:
Trade Balance, In Value Terms, 2007–2020
Figure 7:
Per Capita Consumption, 2007–2020
Figure 8:
Market Forecast To 2030
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2007–2020
Figure 21:
Production, In Value Terms, 2007–2020
Figure 22:
Imports, In Physical Terms, 2007–2020
Figure 23:
Imports, In Value Terms, 2007–2020
Figure 24:
Imports, In Physical Terms, By Country, 2020
Figure 25:
Imports, In Physical Terms, By Country, 2007–2020
Figure 26:
Imports, In Value Terms, By Country, 2007–2020
Figure 27:
Import Prices, By Country Of Origin, 2007–2020
Figure 28:
Exports, In Physical Terms, 2007–2020
Figure 29:
Exports, In Value Terms, 2007–2020
Figure 30:
Exports, In Physical Terms, By Country, 2020
Figure 31:
Exports, In Physical Terms, By Country, 2007–2020
Figure 32:
Exports, In Value Terms, By Country, 2007–2020
Figure 33:
Export Prices, By Country Of Destination, 2007–2020

Solar Energy Market: Getting to Net-Zero amid Energy Crisis



Join our live webinar to get insights into the global solar energy market.



Thursday, November 4th, 2021 @ 03:00 pm ET


Register

Wind Energy Market: Getting to Net-Zero amid Energy Crisis



Join our live webinar to get insights into the global wind energy market.



Thursday, November 11th, 2021 @ 04:00 pm ET


Register

Biogas Market: Getting to Net-Zero amid Energy Crisis



Join our live webinar to get insights into the global biogas market.



Thursday, November 18th, 2021 @ 04:00 pm ET


Register
Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data