Report EU - Sterile Surgical or Dental Adhesion Barriers - Market Analysis, Forecast, Size, Trends and Insights for 499$
Latest Report Update: Oct 1, 2022

EU - Sterile Surgical or Dental Adhesion Barriers - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)

EU: Market for Sterile Surgical Or Dental Adhesion Barriers 2022

Market Size for Sterile Surgical Or Dental Adhesion Barriers in the EU

In 2021, the EU sterile medical adhesion barrier market was finally on the rise to reach $X after three years of decline. In general, consumption, however, saw a abrupt contraction. Over the period under review, the market reached the peak level at $X in 2012; however, from 2013 to 2021, consumption stood at a somewhat lower figure.

Production of Sterile Surgical Or Dental Adhesion Barriers in the EU

In value terms, sterile medical adhesion barrier production reached $X in 2021 estimated in export price. Over the period under review, production, however, recorded a deep slump. The most prominent rate of growth was recorded in 2017 with an increase of X% against the previous year. Over the period under review, production hit record highs at $X in 2012; however, from 2013 to 2021, production remained at a lower figure.

Exports of Sterile Surgical Or Dental Adhesion Barriers

Exports in the EU

In 2021, approx. X tons of sterile surgical or dental adhesion barriers were exported in the European Union; growing by X% on the year before. The total export volume increased at an average annual rate of +X% from 2012 to 2021; the trend pattern remained consistent, with only minor fluctuations being observed throughout the analyzed period. The most prominent rate of growth was recorded in 2018 when exports increased by X% against the previous year. Over the period under review, the exports reached the peak figure at X tons in 2019; however, from 2020 to 2021, the exports failed to regain momentum.

In value terms, sterile medical adhesion barrier exports expanded remarkably to $X in 2021. The total export value increased at an average annual rate of +X% from 2012 to 2021; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth was the most pronounced in 2018 with an increase of X%. The level of export peaked in 2021 and is expected to retain growth in years to come.

Exports by Country

Belgium represented the major exporter of sterile surgical or dental adhesion barriers in the European Union, with the volume of exports recording X tons, which was approx. X% of total exports in 2021. Germany (X tons) took the second position in the ranking, followed by the Netherlands (X tons), Spain (X tons), Poland (X tons), Austria (X tons) and Denmark (X tons). All these countries together held near X% share of total exports.

From 2012 to 2021, average annual rates of growth with regard to sterile medical adhesion barrier exports from Belgium stood at +X%. At the same time, Poland (+X%), the Netherlands (+X%), Denmark (+X%) and Spain (+X%) displayed positive paces of growth. Moreover, Poland emerged as the fastest-growing exporter exported in the European Union, with a CAGR of +X% from 2012-2021. Austria experienced a relatively flat trend pattern. By contrast, Germany (-X%) illustrated a downward trend over the same period. While the share of the Netherlands (+X p.p.), Poland (+X p.p.), Denmark (+X p.p.) and Spain (+X p.p.) increased significantly in terms of the total exports from 2012-2021, the share of Belgium (-X p.p.) and Germany (-X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest sterile medical adhesion barrier supplying countries in the European Union were Belgium ($X), Germany ($X) and Austria ($X), together accounting for X% of total exports. The Netherlands, Spain, Denmark and Poland lagged somewhat behind, together accounting for a further X, with a CAGR of +X%, saw the highest growth rate of the value of exports, in terms of the main exporting countries over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

In 2021, the export price in the European Union amounted to $X per ton, growing by X% against the previous year. Over the period under review, the export price, however, saw a relatively flat trend pattern. The pace of growth was the most pronounced in 2020 an increase of X% against the previous year. Over the period under review, the export prices hit record highs at $X per ton in 2013; however, from 2014 to 2021, the export prices stood at a somewhat lower figure.

Prices varied noticeably countryorigin: the country with the highest price was Austria ($X per ton), while Poland ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by the Netherlands (+X%), while the other leaders experienced more modest paces of growth.

Imports of Sterile Surgical Or Dental Adhesion Barriers

Imports in the EU

In 2021, the amount of sterile surgical or dental adhesion barriers imported in the European Union rose rapidly to X tons, picking up by X% compared with the previous year's figure. The total import volume increased at an average annual rate of +X% over the period from 2012 to 2021; the trend pattern remained consistent, with somewhat noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2016 with an increase of X% against the previous year. Over the period under review, imports attained the maximum at X tons in 2014; however, from 2015 to 2021, imports stood at a somewhat lower figure.

In value terms, sterile medical adhesion barrier imports rose remarkably to $X in 2021. The total import value increased at an average annual rate of +X% from 2012 to 2021; the trend pattern remained consistent, with somewhat noticeable fluctuations in certain years. The most prominent rate of growth was recorded in 2013 when imports increased by X%. Over the period under review, imports hit record highs in 2021 and are likely to see gradual growth in years to come.

Imports by Country

Belgium was the major importer of sterile surgical or dental adhesion barriers in the European Union, with the volume of imports amounting to X tons, which was near X% of total imports in 2021. Spain (X tons) took the second position in the ranking, followed by the Netherlands (X tons), Poland (X tons), Italy (X tons), Austria (X tons), Germany (X tons) and France (X tons). All these countries together held approx. X% share of total imports.

Belgium experienced a relatively flat trend pattern with regard to volume of imports of sterile surgical or dental adhesion barriers. At the same time, the Netherlands (+X%), Poland (+X%), Italy (+X%) and Spain (+X%) displayed positive paces of growth. Moreover, the Netherlands emerged as the fastest-growing importer imported in the European Union, with a CAGR of +X% from 2012-2021. Austria and France experienced a relatively flat trend pattern. By contrast, Germany (-X%) illustrated a downward trend over the same period. While the share of the Netherlands (+X p.p.), Poland (+X p.p.) and Italy (+X p.p.) increased significantly in terms of the total imports from 2012-2021, the share of Belgium (-X p.p.) and Germany (-X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest sterile medical adhesion barrier importing markets in the European Union were Belgium ($X), Germany ($X) and the Netherlands ($X), together accounting for X% of total imports.

Among the main importing countries, the Netherlands, with a CAGR of +X%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

The import price in the European Union stood at $X per ton in 2021, increasing by X% against the previous year. In general, the import price continues to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2015 when the import price increased by X%. As a result, import price attained the peak level of $X per ton. From 2016 to 2021, the import prices remained at a somewhat lower figure.

There were significant differences in the average prices amongst the major importing countries. In 2021, the country with the highest price was Germany ($X per ton), while Poland ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Germany (+X%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Market Intelligence Platform

Base Year Historical Period Forecast Period Units
2022 2012-2022 2023-2030 US$, Tons

Frequently Asked Questions (FAQ) :

What are the largest markets for sterile surgical or dental adhesion barriers in the the EU?
+
The countries with the highest volumes of consumption in 2021 were Germany, France and Poland, with a combined 54% share of total consumption. These countries were followed by Spain, Italy, the Netherlands, Belgium, Denmark, Greece, Austria, Hungary, Slovakia and the Czech Republic, which together accounted for a further 39%.
What are the largest producers of sterile surgical or dental adhesion barriers in the the EU?
+
The countries with the highest volumes of production in 2021 were Germany, France and Poland, together comprising 64% of total production. These countries were followed by Denmark, the Netherlands, Spain and Belgium, which together accounted for a further 23%.
What are the leading suppliers of sterile surgical or dental adhesion barriers in the the EU?
+
In value terms, Belgium, Germany and Austria were the countries with the highest levels of exports in 2021, together accounting for 68% of total exports. These countries were followed by the Netherlands, Spain, Denmark and Poland, which together accounted for a further 22%.
What are the leading importers of sterile surgical or dental adhesion barriers in the the EU?
+
In value terms, Belgium, Germany and the Netherlands were the countries with the highest levels of imports in 2021, together comprising 67% of total imports.
What is the average export price for sterile surgical or dental adhesion barriers in the the EU?
+
In 2021, the export price in the European Union amounted to $374,567 per ton, surging by 3.9% against the previous year.
What is the average import price for sterile surgical or dental adhesion barriers in the the EU?
+
In 2021, the import price in the European Union amounted to $234,955 per ton, growing by 4.9% against the previous year.

This report provides an in-depth analysis of the market for sterile medical adhesion barrier in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.


Product coverage:
• Prodcom 32505030 - Sterile surgical or dental adhesion barriers, whether or not absorbable, sterile suture materials, including sterile absorbable surgical or dental yarns (excluding catgut), sterile tissue adhesives for surgical wound closure, sterile laminaria and sterile laminaria tents, sterile absorbable surgical or dental haemostatics
• Prodcom 21202430 - Sterile surgical catgut

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Production in the EU, split by region and country
• Trade (exports and imports) in the EU
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
REPORT DESCRIPTION
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
CONSUMPTION BY COUNTRY
3.3
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCT

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
7.2
PRODUCTION BY COUNTRY
8. IMPORTS

The Largest Importers on The Market and How They Succeed

8.1
IMPORTS FROM 2012–2022
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Exporters on The Market and How They Succeed

9.1
EXPORTS FROM 2012–2022
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

11. COUNTRY PROFILES

The Largest Markets And Their Profiles

• Austria
• Belgium
• Bulgaria
• Croatia
• Cyprus
• Czech Republic
• Denmark
• Estonia
• Finland
• France
• Germany
• Greece
• Hungary
• Ireland
• Italy
• Latvia
• Lithuania
• Luxembourg
• Malta
• Netherlands
• Poland
• Portugal
• Romania
• Slovakia
• Slovenia
• Spain
• Sweden
LIST OF TABLES
Table 1:
Key Findings In 2022
Table 2:
Market Volume, In Physical Terms, 2012–2022
Table 3:
Market Value, 2012–2022
Table 4:
Per Capita Consumption, By Country, 2018–2022
Table 5:
Production, In Physical Terms, By Country, 2012–2022
Table 6:
Imports, In Physical Terms, By Country, 2012–2022
Table 7:
Imports, In Value Terms, By Country, 2012–2022
Table 8:
Import Prices, By Country Of Destination, 2012–2022
Table 9:
Exports, In Physical Terms, By Country, 2012–2022
Table 10:
Exports, In Value Terms, By Country, 2012–2022
Table 11:
Export Prices, By Country Of Origin, 2012–2022
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2012–2022
Figure 2:
Market Value, 2012–2022
Figure 3:
Consumption, By Country, 2022
Figure 4:
Market Forecast To 2030
Figure 5:
Products: Market Size And Growth, By Type
Figure 6:
Products: Average Per Capita Consumption, By Type
Figure 7:
Products: Exports And Growth, By Type
Figure 8:
Products: Export Prices And Growth, By Type
Figure 9:
Production Volume And Growth
Figure 10:
Exports And Growth
Figure 11:
Export Prices And Growth
Figure 12:
Market Size And Growth
Figure 13:
Per Capita Consumption
Figure 14:
Imports And Growth
Figure 15:
Import Prices
Figure 16:
Production, In Physical Terms, 2012–2022
Figure 17:
Production, In Value Terms, 2012–2022
Figure 18:
Production, By Country, 2022
Figure 19:
Production, In Physical Terms, By Country, 2012–2022
Figure 20:
Imports, In Physical Terms, 2012–2022
Figure 21:
Imports, In Value Terms, 2012–2022
Figure 22:
Imports, In Physical Terms, By Country, 2022
Figure 23:
Imports, In Physical Terms, By Country, 2012–2022
Figure 24:
Imports, In Value Terms, By Country, 2012–2022
Figure 25:
Import Prices, By Country, 2012–2022
Figure 26:
Exports, In Physical Terms, 2012–2022
Figure 27:
Exports, In Value Terms, 2012–2022
Figure 28:
Exports, In Physical Terms, By Country, 2022
Figure 29:
Exports, In Physical Terms, By Country, 2012–2022
Figure 30:
Exports, In Value Terms, By Country, 2012–2022
Figure 31:
Export Prices, 2012–2022
Webinar: Decarbonisation and Your Business Strategy - Zero Net Carbon Buildings

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, February 22nd, 2022 @ 04:00 pm ET

Webinar: Decarbonisation and Your Business Strategy - Tools and Marketplaces

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, February 8th, 2022 @ 04:00 pm ET

Webinar: Decarbonisation and Your Business Strategy - Steps and Practices

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, January 25th, 2022 @ 04:00 pm ET