Latest Report Update: Dec 26, 2019

Denmark - Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Licenses

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service and Privacy Policy. We'll occasionally send you account related emails.

Denmark: Overview of the Market for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) 2019

Market Size for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in Denmark

The revenue of the market for tubes, pipes and hollow profiles (of iron or steel) in Denmark amounted to $X in 2018, shrinking by -X% against the previous year. In general, consumption of tubes, pipes and hollow profiles (of iron or steel) continues to indicate a slight shrinkage. The growth pace was the most rapid in 2016 with an increase of X% year-to-year. Consumption of tubes, pipes and hollow profiles (of iron or steel) peaked at $X in 2017, and then declined slightly in the following year.

Production of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in Denmark

In value terms, production of tubes, pipes and hollow profiles (of iron or steel) stood at $X in 2018 estimated in export prices. Overall, production of tubes, pipes and hollow profiles (of iron or steel) continues to indicate a drastic contraction. The most prominent rate of growth was recorded in 2011 when production volume increased by X% y-o-y. Over the period under review, production of tubes, pipes and hollow profiles (of iron or steel) reached its peak figure level at $X in 2008; however, from 2009 to 2018, production stood at a somewhat lower figure.

Exports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)

Exports from Denmark

In 2018, approx. X tonnes of tubes, pipes and hollow profiles (of iron or steel) were exported from Denmark; shrinking by -X% against the previous year. Overall, exports of tubes, pipes and hollow profiles (of iron or steel) continue to indicate an abrupt drop. The growth pace was the most rapid in 2014 with an increase of X% year-to-year. Exports peaked at X tonnes in 2007; however, from 2008 to 2018, exports failed to regain their momentum.

In value terms, exports of tubes, pipes and hollow profiles (of iron or steel) stood at $X in 2018. Over the period under review, exports of tubes, pipes and hollow profiles (of iron or steel) continue to indicate an abrupt decrease. The growth pace was the most rapid in 2011 when exports increased by X% y-o-y. In that year, exports of tubes, pipes and hollow profiles (of iron or steel) reached their peak of $X. From 2012 to 2018, the growth of exports of tubes, pipes and hollow profiles (of iron or steel) remained at a somewhat lower figure.

Exports by Country

Sweden (X tonnes) was the main destination for exports of tubes, pipes and hollow profiles (of iron or steel) from Denmark, accounting for a X% share of total exports. Moreover, exports of tubes, pipes and hollow profiles (of iron or steel) to Sweden exceeded the volume sent to the second major destination, Poland (X tonnes), twofold. Germany (X tonnes) ranked third in terms of total exports with a X% share.

From 2007 to 2018, the average annual rate of growth in terms of volume to Sweden totaled -X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Poland (-X% per year) and Germany (-X% per year).

In value terms, Sweden ($X), Norway ($X) and Germany ($X) were the largest markets for iron or steel pipe and tube exported from Denmark worldwide, together comprising X% of total exports. Poland, the UK, the Netherlands, Latvia, Gabon, Finland, Faroe Islands, Italy and Lithuania lagged somewhat behind, together accounting for a further X the main countries of destination, Faroe Islands experienced the highest rates of growth with regard to exports, over the last eleven years, while the other leaders experienced more modest paces of growth.

Export Prices by Country

The average export price for tubes, pipes and hollow profiles (of iron or steel) stood at $X per tonne in 2018, rising by X% against the previous year. Overall, the export price for tubes, pipes and hollow profiles (of iron or steel) continues to indicate a slight expansion. The most prominent rate of growth was recorded in 2011 when the average export price increased by X% against the previous year. In that year, the average export prices for tubes, pipes and hollow profiles (of iron or steel) attained their peak level of $X per tonne. From 2012 to 2018, the growth in terms of the average export prices for tubes, pipes and hollow profiles (of iron or steel) remained at a lower figure.

Prices varied noticeably by the country of destination; the country with the highest price was Norway ($X per tonne), while the average price for exports to Italy ($X per tonne) was amongst the lowest.

From 2007 to 2018, the most notable rate of growth in terms of prices was recorded for supplies to Germany, while the prices for the other major destinations experienced more modest paces of growth.

Imports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)

Imports into Denmark

In 2018, the amount of tubes, pipes and hollow profiles (of iron or steel) imported into Denmark totaled X tonnes, falling by -X% against the previous year. In general, imports of tubes, pipes and hollow profiles (of iron or steel) continue to indicate a mild drop. The pace of growth was the most pronounced in 2010 with an increase of X% y-o-y. Over the period under review, imports of tubes, pipes and hollow profiles (of iron or steel) attained their peak figure at X tonnes in 2017, and then declined slightly in the following year.

In value terms, imports of tubes, pipes and hollow profiles (of iron or steel) totaled $X in 2018. In general, imports of tubes, pipes and hollow profiles (of iron or steel) continue to indicate a noticeable decline. The most prominent rate of growth was recorded in 2011 with an increase of X% year-to-year. Over the period under review, imports of tubes, pipes and hollow profiles (of iron or steel) reached their maximum at $X in 2008; however, from 2009 to 2018, imports remained at a lower figure.

Imports by Country

Germany (X tonnes), Italy (X tonnes) and the Netherlands (X tonnes) were the main suppliers of imports of tubes, pipes and hollow profiles (of iron or steel) to Denmark, together comprising X% of total imports. These countries were followed by Poland, Finland, Austria, Sweden, Mexico, the UK, Ukraine, France and Turkey, which together accounted for a further X 2007 to 2018, the most notable rate of growth in terms of imports, amongst the main suppliers, was attained by Mexico, while the other leaders experienced more modest paces of growth.

In value terms, the largest iron or steel pipe and tube suppliers to Denmark were Italy ($X), Germany ($X) and the Netherlands ($X), with a combined X% share of total imports. These countries were followed by Austria, Sweden, Finland, Poland, Mexico, France, the UK, Ukraine and Turkey, which together accounted for a further X experienced the highest rates of growth with regard to imports, among the main suppliers over the last eleven years, while the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2018, the average import price for tubes, pipes and hollow profiles (of iron or steel) amounted to $X per tonne, surging by X% against the previous year. Over the period under review, the import price for tubes, pipes and hollow profiles (of iron or steel), however, continues to indicate a mild reduction. The most prominent rate of growth was recorded in 2018 when the average import price increased by X% year-to-year. The import price peaked at $X per tonne in 2008; however, from 2009 to 2018, import prices failed to regain their momentum.

There were significant differences in the average prices amongst the major supplying countries. In 2018, the country with the highest price was Sweden ($X per tonne), while the price for Ukraine ($X per tonne) was amongst the lowest.

From 2007 to 2018, the most notable rate of growth in terms of prices was attained by Sweden, while the prices for the other major suppliers experienced mixed trend patterns.

Source: IndexBox AI Platform

Product coverage:
• Prodcom 24201110 - Line pipe, of a kind used for oil or gas pipelines, seamless, of stainless steel
• Prodcom 24201150 - Line pipe, of a kind used for oil or gas pipelines, seamless, of steel other than stainless steel
• Prodcom 24201210 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of stainless steel
• Prodcom 24201250 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of steel other than stainless steel
• Prodcom 24201310 - Tubes and pipes, of circular cross-section, seamless, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill pipe used for oil or gas drilling)
• Prodcom 24201330 - Precision tubes and pipes, of circular cross-section, colddrawn or cold-rolled, seamless, of steel other than stainless steel
• Prodcom 24201350 - Tubes and pipes, of circular cross-section, cold-drawn or coldrolled, s eamless, of steel other than stainless steel (excluding precision tubes and pipes)
• Prodcom 24201370 - Tubes and pipes, of circular cross-section, hot-finished, s eamless, of steel other than stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill-pipe used for oil or gas drilling)
• Prodcom 24201400 - Tubes and pipes, of non-circular cross-section, seamless, a nd hollow profiles, seamless, of steel
• Prodcom 24202110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally welded, of an external diameter > .406,4 mm, of steel
• Prodcom 24202150 - Line pipe, of a kind used for oil or gas pipelines, other than longitudinally welded, of an external diameter > .406,4 mm, of steel
• Prodcom 24202200 - Casing, of a kind used in drilling for oil or gas, welded, of an external diameter > .406,4 mm, of steel
• Prodcom 24202300 - Tubes and pipes, welded, of an external diameter > .406,4 mm, of steel (excluding line pipe of a kind used for oil or gas pipelines and casing used for oil or gas drilling)
• Prodcom 24202400 - Tubes and pipes, riveted or similarly closed, of an external diameter > .406,4 mm, of steel (excluding line pipe for oil and gas pipelines, casing used for oil or gas drilling and welded tubes and pipes)
• Prodcom 24203110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of stainless steel
• Prodcom 24203150 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of steel other than stainless steel
• Prodcom 24203210 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of stainless steel
• Prodcom 24203250 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of steel other than stainless steel
• Prodcom 24203310 - Tubes and pipes, of circular cross-section, welded, of an external diameter . .406,4 mm, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing used for oil or gas drilling)
• Prodcom 24203340 - Precision tubes and pipes, of circular cross-section, welded, o f an external diameter . .406,4 mm, of steel other than stainless steel
• Prodcom 24203370 - Tubes and pipes, of circular cross-section, hot- or coldformed and welded, of an external diameter . .406,4 mm, of steel other than stainless steel
• Prodcom 24203410 - Tubes and pipes, of non-circular cross-section, hot- or coldformed and welded, of stainless steel
• Prodcom 24203430 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness . 2 mm, hotor cold-formed and welded, of steel other than stainless steel
• Prodcom 24203450 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness > 2 mm, hot-or cold-formed and welded, of steel other than stainless steel
• Prodcom 24203470 - Tubes and pipes, of other non-circular cross-section than square or rectangular, hot- or cold-formed and welded, of steel other than stainless steel
• Prodcom 24203500 - Tubes and pipes, open seam, riveted or similarly closed, of steel (excluding line pipe for oil and gas pipelines, casing and tubing used for oil or gas drilling and other welded tubes and pipes)
• Prodcom 24512000 - Tubes, pipes and hollow profiles of cast iron excluding tubes, p ipes, hollow profiles made into identifiable parts of articles, s uch as sections of central heating radiators and machinery parts

This report provides an in-depth analysis of the market for iron or steel pipe and tube in Denmark. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.


Country coverage:
• Denmark

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in Denmark
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1
KEY FINDINGS
2.2
MARKET TRENDS
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2007–2019
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2007–2019
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2019
Table 2:
Market Volume, In Physical Terms, 2007–2019
Table 3:
Market Value, 2007–2019
Table 4:
Per Capita Consumption In 2007–2019
Table 5:
Imports, In Physical Terms, By Country, 2007–2019
Table 6:
Imports, In Value Terms, By Country, 2007–2019
Table 7:
Import Prices, By Country Of Origin, 2007–2019
Table 8:
Exports, In Physical Terms, By Country, 2007–2019
Table 9:
Exports, In Value Terms, By Country, 2007–2019
Table 10:
Export Prices, By Country Of Destination, 2007–2019
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2007–2019
Figure 2:
Market Value, 2007–2019
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007–2019
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007–2019
Figure 5:
Trade Balance, In Physical Terms, 2007–2019
Figure 6:
Trade Balance, In Value Terms, 2007–2019
Figure 7:
Per Capita Consumption, 2007–2019
Figure 8:
Market Forecast To 2025
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2007–2019
Figure 21:
Production, In Value Terms, 2007–2019
Figure 22:
Imports, In Physical Terms, 2007–2019
Figure 23:
Imports, In Value Terms, 2007–2019
Figure 24:
Imports, In Physical Terms, By Country, 2019
Figure 25:
Imports, In Physical Terms, By Country, 2007–2019
Figure 26:
Imports, In Value Terms, By Country, 2007–2019
Figure 27:
Import Prices, By Country Of Origin, 2007–2019
Figure 28:
Exports, In Physical Terms, 2007–2019
Figure 29:
Exports, In Value Terms, 2007–2019
Figure 30:
Exports, In Physical Terms, By Country, 2019
Figure 31:
Exports, In Physical Terms, By Country, 2007–2019
Figure 32:
Exports, In Value Terms, By Country, 2007–2019
Figure 33:
Export Prices, By Country Of Destination, 2007–2019

Webinar: Global Pineapple Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global pineapple market.



Sunday, July 19th, 2020 @ 10:00 am ET


Register

Webinar: Global Strawberry Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global strawberry market.



Monday, July 20th, 2020 @ 10:00 am ET


Register

Webinar: Global Chicken Meat Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global chicken meat market.



Wednesday, July 22nd, 2020 @ 10:00 am ET


Register
Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data