Denmark - Planing, Milling or Moulding Machines - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingDenmark: Wood Milling Machine Market 2024
Wood Milling Machine Market Size in Denmark
In 2022, after three years of growth, there was significant decline in the Danish wood milling machine market, when its value decreased by X% to $X. In general, consumption showed a relatively flat trend pattern. As a result, consumption reached the peak level of $X, and then declined sharply in the following year.
Wood Milling Machine Production in Denmark
In value terms, wood milling machine production declined modestly to $X in 2022 estimated in export price. Over the period under review, the total production indicated a resilient expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The most prominent rate of growth was recorded in 2015 with an increase of X%. As a result, production reached the peak level of $X. From 2016 to 2022, production growth remained at a somewhat lower figure.
Wood Milling Machine Exports
Exports from Denmark
In 2022, wood milling machine exports from Denmark skyrocketed to X units, picking up by X% against the previous year's figure. In general, exports continue to indicate resilient growth. The pace of growth appeared the most rapid in 2014 when exports increased by X% against the previous year. The exports peaked in 2022 and are likely to see steady growth in the near future.
In value terms, wood milling machine exports shrank significantly to $X in 2022. Overall, exports, however, faced a deep setback. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. As a result, the exports attained the peak of $X, and then declined sharply in the following year.
Exports by Country
Germany (X units) was the main destination for wood milling machine exports from Denmark, with a X% share of total exports. Moreover, wood milling machine exports to Germany exceeded the volume sent to the second major destination, Spain (X units), sevenfold. The third position in this ranking was taken by Sweden (X units), with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume to Germany totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Spain (X% per year) and Sweden (X% per year).
In value terms, Germany ($X) emerged as the key foreign market for planing, milling or moulding machines exports from Denmark, comprising X% of total exports. The second position in the ranking was held by Spain ($X), with a X% share of total exports. It was followed by Norway, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value to Germany totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Spain (X% per year) and Norway (X% per year).
Export Prices by Country
The average wood milling machine export price stood at $X per unit in 2022, falling by X% against the previous year. In general, the export price faced a dramatic curtailment. The pace of growth appeared the most rapid in 2021 an increase of X% against the previous year. The export price peaked at $X per unit in 2012; however, from 2013 to 2022, the export prices failed to regain momentum.
There were significant differences in the average prices for the major foreign markets. In 2022, amid the top suppliers, the country with the highest price was Estonia ($X per unit), while the average price for exports to Germany ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Estonia (X%), while the prices for the other major destinations experienced a decline.
Wood Milling Machine Imports
Imports into Denmark
For the fourth consecutive year, Denmark recorded growth in purchases abroad of planing, milling or moulding machines, which increased by X% to X units in 2022. In general, imports continue to indicate buoyant growth. The most prominent rate of growth was recorded in 2014 when imports increased by X%. Imports peaked in 2022 and are expected to retain growth in the near future.
In value terms, wood milling machine imports shrank notably to $X in 2022. Over the period under review, imports saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2016 with an increase of X%. Over the period under review, imports attained the maximum at $X in 2021, and then fell significantly in the following year.
Imports by Country
In 2022, France (X units) constituted the largest supplier of wood milling machine to Denmark, accounting for a X% share of total imports. Moreover, wood milling machine imports from France exceeded the figures recorded by the second-largest supplier, Sweden (X units), fourfold. The third position in this ranking was taken by Belgium (X units), with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume from France amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Sweden (X% per year) and Belgium (X% per year).
In value terms, Italy ($X) constituted the largest supplier of planing, milling or moulding machines to Denmark, comprising X% of total imports. The second position in the ranking was taken by Germany ($X), with a X% share of total imports. It was followed by Sweden, with a X% share.
From 2012 to 2022, the average annual growth rate of value from Italy stood at X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (X% per year) and Sweden (X% per year).
Import Prices by Country
In 2022, the average wood milling machine import price amounted to $X per unit, which is down by X% against the previous year. Over the period under review, the import price faced a abrupt curtailment. The pace of growth appeared the most rapid in 2016 an increase of X% against the previous year. The import price peaked at $X per unit in 2013; however, from 2014 to 2022, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Italy ($X per unit), while the price for France ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by China (X%), while the prices for the other major suppliers experienced mixed trend patterns.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the wood milling machine market in Denmark. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28491250 - Planing, milling or moulding (by cutting) machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
Country coverage:
- Denmark
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Denmark
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the wood milling machine market in Asia.
This report provides an in-depth analysis of the wood milling machine market in the U.S..
This report provides an in-depth analysis of the wood milling machine market in China.
This report provides an in-depth analysis of the wood milling machine market in the EU.
This report provides an in-depth analysis of the global wood milling machine market.
- Wood Milling Machine Price Denmark
- Wood Milling Machine Market
- Cold Metal-rolling Mill Market
- Mill Rolling Roll Market
- Machine-tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-station Transfer Machine Market
- Lathe for Removing Metal Market
- Non-numerically Controlled Lathe Market