Czech Republic - U-Sections of Non-Alloy Steel - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCzech Republic: Non-Alloy Steel U-Section Market 2024
Non-Alloy Steel U-Section Market Size in the Czech Republic
In 2022, the Czech non-alloy steel u-section market was finally on the rise to reach $X after four years of decline. In general, consumption recorded a abrupt setback. Over the period under review, the market attained the maximum level at $X in 2012; however, from 2013 to 2022, consumption remained at a lower figure.
Non-Alloy Steel U-Section Production in the Czech Republic
In value terms, non-alloy steel u-section production fell slightly to $X in 2022 estimated in export price. In general, production continues to indicate a abrupt setback. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. Over the period under review, production reached the maximum level at $X in 2012; however, from 2013 to 2022, production stood at a somewhat lower figure.
Need a Better Market Strategy?
Find out how to improve your business.
Book a free 30-minute chat with our expert.
Non-Alloy Steel U-Section Exports
Exports from the Czech Republic
In 2022, non-alloy steel u-section exports from the Czech Republic shrank to X tons, dropping by X% on the year before. Over the period under review, total exports indicated a tangible expansion from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2020 indices. The growth pace was the most rapid in 2021 when exports increased by X% against the previous year. As a result, the exports attained the peak of X tons, and then reduced in the following year.
In value terms, non-alloy steel u-section exports skyrocketed to $X in 2022. In general, exports, however, posted a buoyant expansion. The most prominent rate of growth was recorded in 2021 with an increase of X%. Over the period under review, the exports attained the peak figure in 2022 and are expected to retain growth in the near future.
Exports by Country
Poland (X tons) was the main destination for non-alloy steel u-section exports from the Czech Republic, with a X% share of total exports. Moreover, non-alloy steel u-section exports to Poland exceeded the volume sent to the second major destination, Germany (X tons), threefold. The third position in this ranking was taken by Slovakia (X tons), with a X% share.
From 2012 to 2022, the average annual growth rate of volume to Poland amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Germany (X% per year) and Slovakia (X% per year).
In value terms, Poland ($X) remains the key foreign market for u-sections of non-alloy steel exports from the Czech Republic, comprising X% of total exports. The second position in the ranking was taken by Germany ($X), with a X% share of total exports. It was followed by Slovakia, with a X% share.
From 2012 to 2022, the average annual growth rate of value to Poland amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Germany (X% per year) and Slovakia (X% per year).
Export Prices by Country
In 2022, the average non-alloy steel u-section export price amounted to $X per ton, surging by X% against the previous year. Overall, the export price posted moderate growth. The pace of growth appeared the most rapid in 2021 when the average export price increased by X% against the previous year. The export price peaked in 2022 and is expected to retain growth in years to come.
Average prices varied somewhat for the major export markets. In 2022, amid the top suppliers, the countries with the highest prices were Austria ($X per ton) and Slovakia ($X per ton), while the average price for exports to Poland ($X per ton) and Croatia ($X per ton) were amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Austria (X%), while the prices for the other major destinations experienced more modest paces of growth.
Non-Alloy Steel U-Section Imports
Imports into the Czech Republic
In 2022, purchases abroad of u-sections of non-alloy steel decreased by X% to X tons, falling for the third year in a row after two years of growth. In general, imports recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2015 when imports increased by X%. Over the period under review, imports reached the maximum at X tons in 2019; however, from 2020 to 2022, imports stood at a somewhat lower figure.
In value terms, non-alloy steel u-section imports soared to $X in 2022. Over the period under review, total imports indicated a pronounced increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 when imports increased by X%. Imports peaked in 2022 and are expected to retain growth in the immediate term.
Imports by Country
Poland (X tons), Germany (X tons) and Italy (X tons) were the main suppliers of non-alloy steel u-section imports to the Czech Republic, with a combined X% share of total imports.
From 2012 to 2022, the biggest increases were recorded for Italy (with a CAGR of X%), while purchases for the other leaders experienced mixed trend patterns.
In value terms, Poland ($X), Germany ($X) and Italy ($X) were the largest non-alloy steel u-section suppliers to the Czech Republic, together accounting for X% of total imports.
Italy, with a CAGR of X%, saw the highest growth rate of the value of imports, in terms of the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the average non-alloy steel u-section import price amounted to $X per ton, surging by X% against the previous year. In general, the import price saw perceptible growth. The most prominent rate of growth was recorded in 2021 when the average import price increased by X% against the previous year. The import price peaked in 2022 and is expected to retain growth in the near future.
Average prices varied noticeably amongst the major supplying countries. In 2022, amid the top importers, the countries with the highest prices were Germany ($X per ton) and Poland ($X per ton), while the price for Slovakia ($X per ton) and France ($X per ton) were amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by France (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the non-alloy steel u-section market in the Czech Republic. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24107110 - U-sections of a web height of .80 mm or more (of non-alloy steel)
Country coverage:
- Czech Republic
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in the Czech Republic
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the non-alloy steel u-section market in Asia.
This report provides an in-depth analysis of the non-alloy steel u-section market in the U.S..
This report provides an in-depth analysis of the non-alloy steel u-section market in China.
This report provides an in-depth analysis of the non-alloy steel u-section market in the EU.
This report provides an in-depth analysis of the global non-alloy steel u-section market.
- Non-Alloy Steel U-Section Price the Czech Republic
- Non-alloy Steel U-section Market
- Arsenic Market
- Pig Iron Market
- Ferro-silico-manganese Market
- Ferro-molybdenum Market
- Metal Remelting Scrap Ingots Market
- Hot-rolled Steel Products Market
- Cold-rolled Steel Products Market
- Flat-rolled Steel Products Market