Report CIS - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights for 499$
Report Update Apr 1, 2024

CIS - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)
Subscription
Online access and download
from $350/month

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

View Pricing

CIS: Market for Rubber-to-Metal and Moulded Articles 2024

Market Size for Rubber-to-Metal and Moulded Articles in CIS

The CIS rubber-to-metal and moulded article market reduced dramatically to $X in 2022, falling by X% against the previous year. The total consumption indicated a measured increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The level of consumption peaked at $X in 2021, and then shrank significantly in the following year.

Production of Rubber-to-Metal and Moulded Articles in CIS

In value terms, rubber-to-metal and moulded article production stood at $X in 2022 estimated in export price. The total production indicated a notable expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The pace of growth was the most pronounced in 2013 with an increase of X% against the previous year. The level of production peaked at $X in 2016; however, from 2017 to 2022, production stood at a somewhat lower figure.

Exports of Rubber-to-Metal and Moulded Articles

Exports in CIS

In 2022, the amount of rubber-to-metal and moulded articles exported in the CIS contracted significantly to X tons, waning by X% against the previous year. Overall, exports, however, continue to indicate a notable expansion. The most prominent rate of growth was recorded in 2016 when exports increased by X%. Over the period under review, the exports reached the peak figure at X tons in 2017; however, from 2018 to 2022, the exports failed to regain momentum.

In value terms, rubber-to-metal and moulded article exports reduced to $X in 2022. Over the period under review, exports, however, posted prominent growth. The most prominent rate of growth was recorded in 2016 with an increase of X% against the previous year. The level of export peaked at $X in 2021, and then shrank in the following year.

Exports by Country

In 2022, Russia (X tons) represented the largest exporter of rubber-to-metal and moulded articles, comprising X% of total exports. Belarus (X tons) held an X% share (based on physical terms) of total exports, which put it in second place, followed by Kazakhstan (X%) and Armenia (X%).

Exports from Russia increased at an average annual rate of X% from 2012 to 2022. At the same time, Armenia (X%) and Kazakhstan (X%) displayed positive paces of growth. Moreover, Armenia emerged as the fastest-growing exporter exported in the CIS, with a CAGR of X% from 2012-2022. Belarus experienced a relatively flat trend pattern. Kazakhstan (X p.p.) and Armenia (X p.p.) significantly strengthened its position in terms of the total exports, while Belarus and Russia saw its share reduced by X% and X% from 2012 to 2022, respectively.

In value terms, the largest rubber-to-metal and moulded article supplying countries in the CIS were Russia ($X), Belarus ($X) and Kazakhstan ($X), with a combined X% share of total exports. These countries were followed by Armenia, which accounted for a further X%.

In terms of the main exporting countries, Armenia, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The export price in the CIS stood at $X per ton in 2022, picking up by X% against the previous year. Overall, the export price showed a mild expansion. As a result, the export price attained the peak level and is likely to continue growth in the immediate term.

There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Belarus ($X per ton), while Russia ($X per ton) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Belarus (X%), while the other leaders experienced more modest paces of growth.

Imports of Rubber-to-Metal and Moulded Articles

Imports in CIS

In 2022, approx. X tons of rubber-to-metal and moulded articles were imported in the CIS; with a decrease of X% on the previous year. Overall, imports, however, enjoyed a noticeable increase. The growth pace was the most rapid in 2016 when imports increased by X% against the previous year. Over the period under review, imports reached the maximum at X tons in 2019; however, from 2020 to 2022, imports failed to regain momentum.

In value terms, rubber-to-metal and moulded article imports fell markedly to $X in 2022. In general, imports, however, recorded a moderate expansion. The most prominent rate of growth was recorded in 2016 with an increase of X%. The level of import peaked at $X in 2021, and then fell markedly in the following year.

Imports by Country

Russia represented the key importer of rubber-to-metal and moulded articles in the CIS, with the volume of imports amounting to X tons, which was near X% of total imports in 2022. Kazakhstan (X tons) held a X% share (based on physical terms) of total imports, which put it in second place, followed by Uzbekistan (X%) and Belarus (X%). Azerbaijan (X tons), Kyrgyzstan (X tons) and Armenia (X tons) followed a long way behind the leaders.

From 2012 to 2022, average annual rates of growth with regard to rubber-to-metal and moulded article imports into Russia stood at X%. At the same time, Kyrgyzstan (X%), Armenia (X%), Uzbekistan (X%) and Azerbaijan (X%) displayed positive paces of growth. Moreover, Kyrgyzstan emerged as the fastest-growing importer imported in the CIS, with a CAGR of X% from 2012-2022. Kazakhstan experienced a relatively flat trend pattern. By contrast, Belarus (X%) illustrated a downward trend over the same period. While the share of Uzbekistan (X p.p.), Kyrgyzstan (X p.p.), Armenia (X p.p.) and Azerbaijan (X p.p.) increased significantly in terms of the total imports from 2012-2022, the share of Belarus (X p.p.), Kazakhstan (X p.p.) and Russia (X p.p.) displayed negative dynamics.

In value terms, Russia ($X) constitutes the largest market for imported rubber-to-metal and moulded articles in the CIS, comprising X% of total imports. The second position in the ranking was held by Kazakhstan ($X), with a X% share of total imports. It was followed by Belarus, with an X% share.

From 2012 to 2022, the average annual growth rate of value in Russia totaled X%. In the other countries, the average annual rates were as follows: Kazakhstan (X% per year) and Belarus (X% per year).

Import Prices by Country

The import price in the CIS stood at $X per ton in 2022, waning by X% against the previous year. Over the period under review, the import price recorded a slight contraction. The pace of growth was the most pronounced in 2021 when the import price increased by X%. As a result, import price reached the peak level of $X per ton, and then shrank markedly in the following year.

There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Belarus ($X per ton), while Kyrgyzstan ($X per ton) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Uzbekistan (X%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

The country with the largest volume of rubber-to-metal and moulded article consumption was Russia, accounting for 53% of total volume. Moreover, rubber-to-metal and moulded article consumption in Russia exceeded the figures recorded by the second-largest consumer, Armenia, fourfold. Kazakhstan ranked third in terms of total consumption with a 10% share.
Armenia constituted the country with the largest volume of rubber-to-metal and moulded article production, comprising approx. 100% of total volume.
In value terms, the largest rubber-to-metal and moulded article supplying countries in the CIS were Russia, Belarus and Kazakhstan, with a combined 84% share of total exports. Armenia lagged somewhat behind, comprising a further 14%.
In value terms, Russia constitutes the largest market for imported rubber-to-metal and moulded articles in the CIS, comprising 58% of total imports. The second position in the ranking was held by Kazakhstan, with a 16% share of total imports. It was followed by Belarus, with an 11% share.
The export price in the CIS stood at $8,169 per ton in 2022, increasing by 34% against the previous year.
In 2022, the import price in the CIS amounted to $8,117 per ton, falling by -28.5% against the previous year.

This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in CIS. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Product coverage:

  • Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
  • Prodcom 2297347 -
  • Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
  • Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles

Country coverage:

Data coverage:

  • Market volume and value
  • Per Capita consumption
  • Forecast of the market dynamics in the medium term
  • Production in CIS, split by region and country
  • Trade (exports and imports) in CIS
  • Export and import prices
  • Market trends, drivers and restraints
  • Key market players and their profiles

Reasons to buy this report:

  • Take advantage of the latest data
  • Find deeper insights into current market developments
  • Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

  1. How to diversify your business and benefit from new market opportunities
  2. How to load your idle production capacity
  3. How to boost your sales on overseas markets
  4. How to increase your profit margins
  5. How to make your supply chain more sustainable
  6. How to reduce your production and supply chain costs
  7. How to outsource production to other countries
  8. How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

  1. 1. INTRODUCTION

    Making Data-Driven Decisions to Grow Your Business

    1. REPORT DESCRIPTION
    2. RESEARCH METHODOLOGY AND AI PLATFORM
    3. DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
    4. GLOSSARY AND SPECIFIC TERMS
  2. 2. EXECUTIVE SUMMARY

    A Quick Overview of Market Performance

    1. KEY FINDINGS
    2. MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
  3. 3. MARKET OVERVIEW

    Understanding the Current State of The Market and Its Prospects

    1. MARKET SIZE
    2. CONSUMPTION BY COUNTRY
    3. MARKET FORECAST TO 2030
  4. 4. MOST PROMISING PRODUCT

    Finding New Products to Diversify Your Business

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
    2. BEST-SELLING PRODUCTS
    3. MOST CONSUMED PRODUCT
    4. MOST TRADED PRODUCT
    5. MOST PROFITABLE PRODUCT FOR EXPORT
  5. 5. MOST PROMISING SUPPLYING COUNTRIES

    Choosing the Best Countries to Establish Your Sustainable Supply Chain

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP COUNTRIES TO SOURCE YOUR PRODUCT
    2. TOP PRODUCING COUNTRIES
    3. TOP EXPORTING COUNTRIES
    4. LOW-COST EXPORTING COUNTRIES
  6. 6. MOST PROMISING OVERSEAS MARKETS

    Choosing the Best Countries to Boost Your Exports

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
    2. TOP CONSUMING MARKETS
    3. UNSATURATED MARKETS
    4. TOP IMPORTING MARKETS
    5. MOST PROFITABLE MARKETS
  7. 7. PRODUCTION

    The Latest Trends and Insights into The Industry

    1. PRODUCTION VOLUME AND VALUE
    2. PRODUCTION BY COUNTRY
  8. 8. IMPORTS

    The Largest Importers on The Market and How They Succeed

    1. IMPORTS FROM 2012–2023
    2. IMPORTS BY COUNTRY
    3. IMPORT PRICES BY COUNTRY
  9. 9. EXPORTS

    The Largest Exporters on The Market and How They Succeed

    1. EXPORTS FROM 2012–2023
    2. EXPORTS BY COUNTRY
    3. EXPORT PRICES BY COUNTRY
  10. 10. PROFILES OF MAJOR PRODUCERS

    The Largest Producers on The Market and Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
  11. 11. COUNTRY PROFILES

    The Largest Markets And Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
    • Armenia
    • Azerbaijan
    • Belarus
    • Kazakhstan
    • Kyrgyzstan
    • Moldova
    • Russia
    • Tajikistan
    • Uzbekistan
  12. LIST OF TABLES

    1. Key Findings In 2023
    2. Market Volume, In Physical Terms, 2012–2023
    3. Market Value, 2012–2023
    4. Per Capita Consumption, By Country, 2018–2023
    5. Production, In Physical Terms, By Country, 2012–2023
    6. Imports, In Physical Terms, By Country, 2012–2023
    7. Imports, In Value Terms, By Country, 2012–2023
    8. Import Prices, By Country Of Destination, 2012–2023
    9. Exports, In Physical Terms, By Country, 2012–2023
    10. Exports, In Value Terms, By Country, 2012–2023
    11. Export Prices, By Country Of Origin, 2012–2023
  13. LIST OF FIGURES

    1. Market Volume, In Physical Terms, 2012–2023
    2. Market Value, 2012–2023
    3. Consumption, By Country, 2023
    4. Market Volume Forecast to 2030
    5. Market Value Forecast to 2030
    6. Products: Market Size And Growth, By Type
    7. Products: Average Per Capita Consumption, By Type
    8. Products: Exports And Growth, By Type
    9. Products: Export Prices And Growth, By Type
    10. Production Volume And Growth
    11. Exports And Growth
    12. Export Prices And Growth
    13. Market Size And Growth
    14. Per Capita Consumption
    15. Imports And Growth
    16. Import Prices
    17. Production, In Physical Terms, 2012–2023
    18. Production, In Value Terms, 2012–2023
    19. Production, By Country, 2023
    20. Production, In Physical Terms, By Country, 2012–2023
    21. Imports, In Physical Terms, 2012–2023
    22. Imports, In Value Terms, 2012–2023
    23. Imports, In Physical Terms, By Country, 2023
    24. Imports, In Physical Terms, By Country, 2012–2023
    25. Imports, In Value Terms, By Country, 2012–2023
    26. Import Prices, By Country, 2012–2023
    27. Exports, In Physical Terms, 2012–2023
    28. Exports, In Value Terms, 2012–2023
    29. Exports, In Physical Terms, By Country, 2023
    30. Exports, In Physical Terms, By Country, 2012–2023
    31. Exports, In Value Terms, By Country, 2012–2023
    32. Export Prices, 2012–2023

Recommended reports

Free Data: Rubber-to-Metal and Moulded Articles - CIS