CIS - Injection-Moulding Machines for Working Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCIS: Injection-Moulding Machine Market 2024
Injection-Moulding Machine Market Size in CIS
The CIS injection-moulding machine market reached $X in 2022, growing by X% against the previous year. Over the period under review, consumption continues to indicate a resilient increase. The level of consumption peaked at $X in 2019; however, from 2020 to 2022, consumption failed to regain momentum.
Injection-Moulding Machine Production in CIS
In value terms, injection-moulding machine production amounted to $X in 2022 estimated in export price. The total production indicated a strong increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The growth pace was the most rapid in 2013 with an increase of X%. Over the period under review, production hit record highs at $X in 2020; however, from 2021 to 2022, production failed to regain momentum.
Need Help Getting into New Markets?
We'll show you how to get there.
Schedule a free 30-minute talk with our specialist.
Injection-Moulding Machine Exports
Exports in CIS
In 2022, overseas shipments of injection-moulding machines for working rubber or plastics decreased by X% to X units for the first time since 2017, thus ending a four-year rising trend. In general, exports, however, saw a resilient expansion. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. As a result, the exports reached the peak of X units, and then fell markedly in the following year.
In value terms, injection-moulding machine exports reduced sharply to $X in 2022. Overall, exports, however, posted a resilient increase. The growth pace was the most rapid in 2014 with an increase of X%. The level of export peaked at $X in 2021, and then plummeted in the following year.
Exports by Country
Russia represented the key exporting country with an export of about X units, which reached X% of total exports. Tajikistan (X units) ranks second in terms of the total exports with an X% share, followed by Uzbekistan (X%), Armenia (X%) and Belarus (X%). Moldova (X units) and Kazakhstan (X units) took a relatively small share of total exports.
Exports from Russia increased at an average annual rate of X% from 2012 to 2022. At the same time, Tajikistan (X%), Uzbekistan (X%), Armenia (X%), Moldova (X%) and Belarus (X%) displayed positive paces of growth. Moreover, Tajikistan emerged as the fastest-growing exporter exported in the CIS, with a CAGR of X% from 2012-2022. By contrast, Kazakhstan (X%) illustrated a downward trend over the same period. Tajikistan (X p.p.), Uzbekistan (X p.p.), Russia (X p.p.) and Armenia (X p.p.) significantly strengthened its position in terms of the total exports, while Moldova, Belarus and Kazakhstan saw its share reduced by X%, X% and X% from 2012 to 2022, respectively.
In value terms, Russia ($X) remains the largest injection-moulding machine supplier in the CIS, comprising X% of total exports. The second position in the ranking was taken by Kazakhstan ($X), with a X% share of total exports. It was followed by Uzbekistan, with a X% share.
From 2012 to 2022, the average annual growth rate of value in Russia totaled X%. In the other countries, the average annual rates were as follows: Kazakhstan (X% per year) and Uzbekistan (X% per year).
Export Prices by Country
In 2022, the export price in the CIS amounted to $X per unit, rising by X% against the previous year. Overall, the export price, however, recorded a perceptible reduction. Over the period under review, the export prices reached the maximum at $X per unit in 2014; however, from 2015 to 2022, the export prices failed to regain momentum.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Kazakhstan ($X per unit), while Armenia ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Uzbekistan (X%), while the other leaders experienced more modest paces of growth.
Injection-Moulding Machine Imports
Imports in CIS
In 2022, the amount of injection-moulding machines for working rubber or plastics imported in the CIS shrank to X units, falling by X% against 2021. In general, imports showed a pronounced shrinkage. The pace of growth appeared the most rapid in 2014 with an increase of X%. As a result, imports attained the peak of X units. From 2015 to 2022, the growth of imports remained at a somewhat lower figure.
In value terms, injection-moulding machine imports reduced to $X in 2022. Over the period under review, imports, however, showed moderate growth. The most prominent rate of growth was recorded in 2014 with an increase of X%. As a result, imports reached the peak of $X. From 2015 to 2022, the growth of imports remained at a somewhat lower figure.
Imports by Country
In 2022, Russia (X units) represented the largest importer of injection-moulding machines for working rubber or plastics, mixing up X% of total imports. It was distantly followed by Uzbekistan (X units), generating a X% share of total imports. Belarus (X units), Azerbaijan (X units), Kazakhstan (X units) and Tajikistan (X units) followed a long way behind the leaders.
Imports into Russia decreased at an average annual rate of X% from 2012 to 2022. At the same time, Tajikistan (X%) and Uzbekistan (X%) displayed positive paces of growth. Moreover, Tajikistan emerged as the fastest-growing importer imported in the CIS, with a CAGR of X% from 2012-2022. By contrast, Azerbaijan (X%), Belarus (X%) and Kazakhstan (X%) illustrated a downward trend over the same period. While the share of Uzbekistan (X p.p.) increased significantly in terms of the total imports from 2012-2022, the share of Belarus (X p.p.), Kazakhstan (X p.p.) and Russia (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Russia ($X), Uzbekistan ($X) and Kazakhstan ($X) were the countries with the highest levels of imports in 2022, with a combined X% share of total imports.
Uzbekistan, with a CAGR of X%, recorded the highest growth rate of the value of imports, among the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in the CIS stood at $X per unit in 2022, picking up by X% against the previous year. Import price indicated a measured expansion from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, injection-moulding machine import price decreased by X% against 2020 indices. The pace of growth appeared the most rapid in 2018 when the import price increased by X%. The level of import peaked at $X per unit in 2020; however, from 2021 to 2022, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Uzbekistan ($X per unit), while Tajikistan ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Uzbekistan (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the injection-moulding machine market in CIS. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28961010 - Injection-moulding machines for working rubber or plastics or for manufacturing rubber or plastic products
Country coverage:
- Armenia
- Azerbaijan
- Belarus
- Kazakhstan
- Kyrgyzstan
- Moldova
- Russia
- Tajikistan
- Uzbekistan
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in CIS, split by region and country
- Trade (exports and imports) in CIS
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Armenia
- Azerbaijan
- Belarus
- Kazakhstan
- Kyrgyzstan
- Moldova
- Russia
- Tajikistan
- Uzbekistan
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the injection-moulding machine market in Asia.
This report provides an in-depth analysis of the injection-moulding machine market in the U.S..
This report provides an in-depth analysis of the injection-moulding machine market in China.
This report provides an in-depth analysis of the injection-moulding machine market in the EU.
This report provides an in-depth analysis of the global injection-moulding machine market.