Latest Report Update: May 30, 2021

Austria - Lathes For Removing Metal - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Licenses

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service, Privacy Policy and Licenses. We'll occasionally send you account related emails.

Austria: Overview of the Market for Lathes For Removing Metal 2021

Market Size for Lathes For Removing Metal in Austria

The Austrian lathe for removing metal market surged to $X in 2020, rising by X% against the previous year. In general, consumption, however, saw a tangible expansion. The most prominent rate of growth was recorded in 2013 with an increase of X% year-to-year. Over the period under review, the market reached the maximum level at $X in 2010; however, from 2011 to 2020, consumption failed to regain the momentum.

Production of Lathes For Removing Metal in Austria

In value terms, lathe for removing metal production fell remarkably to $X in 2020 estimated in export prices. In general, production showed a relatively flat trend pattern. The pace of growth was the most pronounced in 2010 when the production volume increased by X% y-o-y. As a result, production reached the peak level of $X. From 2011 to 2020, production growth remained at a somewhat lower figure.

Exports of Lathes For Removing Metal

Exports from Austria

In 2020, overseas shipments of lathes for removing metal decreased by -X% to X units, falling for the second consecutive year after two years of growth. In general, exports faced a abrupt descent. The growth pace was the most rapid in 2012 when exports increased by X% against the previous year. Over the period under review, lafor removing metal exports hit record highs at X units in 2008; however, from 2009 to 2020, exports failed to regain the momentum.

In value terms, lathe for removing metal exports fell notably to $X in 2020. Over the period under review, exports recorded a abrupt setback. The most prominent rate of growth was recorded in 2018 when exports increased by X% against the previous year. Over the period under review, lafor removing metal exports hit record highs at $X in 2008; however, from 2009 to 2020, exports remained at a lower figure.

Exports by Country

Germany (X units), the U.S. (X units) and China (X units) were the main destinations of lathe for removing metal exports from Austria, together comprising X% of total exports. Russia, the Czech Republic, the Netherlands, Brazil, the UK, Switzerland, Belarus and Italy lagged somewhat behind, together accounting for a further X 2007 to 2020, the biggest increases were in Russia, while shipments for the other leaders experienced more modest paces of growth.

In value terms, Germany ($X), China ($X) and the U.S. ($X) constituted the largest markets for lathe for removing metal exported from Austria worldwide, together comprising X% of total exports. Russia, the Czech Republic, Switzerland, the UK, Italy, Belarus, the Netherlands and Brazil lagged somewhat behind, together comprising a further X the main countries of destination, Brazil recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The average lathe for removing metal export price stood at $X per unit in 2020, which is down by -X% against the previous year. Overall, the export price, however, saw modest growth. The most prominent rate of growth was recorded in 2011 an increase of X% y-o-y. As a result, export price attained the peak level of $X per unit. From 2012 to 2020, the growth in terms of the average export prices failed to regain the momentum.

Prices varied noticeably by the country of destination; the country with the highest price was Italy ($X per unit), while the average price for exports to Russia ($X per unit) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was recorded for supplies to the Netherlands, while the prices for the other major destinations experienced more modest paces of growth.

Imports of Lathes For Removing Metal

Imports into Austria

In 2020, overseas purchases of lathes for removing metal decreased by -X% to X units, falling for the fifth year in a row after two years of growth. Over the period under review, imports showed a abrupt setback. The pace of growth appeared the most rapid in 2012 when imports increased by X% year-to-year. Imports peaked at X units in 2007; however, from 2008 to 2020, imports remained at a lower figure.

In value terms, lathe for removing metal imports reduced notably to $X in 2020. In general, imports saw a perceptible descent. The pace of growth was the most pronounced in 2012 with an increase of X% against the previous year. Imports peaked at $X in 2008; however, from 2009 to 2020, imports failed to regain the momentum.

Imports by Country

Germany (X units), Switzerland (X units) and Italy (X units) were the main suppliers of lathe for removing metal imports to Austria, together accounting for X% of total imports.

From 2007 to 2020, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Switzerland, while imports for the other leaders experienced a decline.

In value terms, Germany ($X) constituted the largest supplier of lathe for removing metal to Austria, comprising X% of total imports. The second position in the ranking was occupied by Italy ($X), with a X% share of total imports. It was followed by Japan, with a X% share.

From 2007 to 2020, the average annual growth rate of value from Germany totaled -X%. The remaining supplying countries recorded the following average annual rates of imports growth: Italy (-X% per year) and Japan (-X% per year).

Import Prices by Country

In 2020, the average lathe for removing metal import price amounted to $X per unit, remaining constant against the previous year. Over the period under review, the import price, however, showed a strong expansion. The most prominent rate of growth was recorded in 2017 an increase of X% year-to-year. The import price peaked at $X per unit in 2019, and then fell in the following year.

There were significant differences in the average prices amongst the major supplying countries. In 2020, the country with the highest price was China ($X per unit), while the price for Switzerland ($X per unit) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was attained by Germany, while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox AI Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for lathes for removing metal in the world?
+
The countries with the highest volumes of lathe for removing metal consumption in 2020 were India (73K units), China (59K units) and the U.S. (29K units), together accounting for 48% of global consumption. These countries were followed by Japan, Pakistan, Germany, France, the United Arab Emirates, Spain, the UK, Mexico, Italy and Russia, which together accounted for a further 24%.
What are the largest producers of lathes for removing metal in the world?
+
The countries with the highest volumes of lathe for removing metal production in 2020 were India (89K units), China (67K units) and Japan (19K units), together accounting for 60% of global production. The U.S., South Korea, Taiwan (Chinese), France, Pakistan, Germany and the UK lagged somewhat behind, together accounting for a further 22%.
What are the leading suppliers of lathes for removing metal to Austria?
+
In value terms, Germany ($34M) constituted the largest supplier of lathe for removing metal to Austria, comprising 52% of total imports. The second position in the ranking was occupied by Italy ($9M), with a 14% share of total imports. It was followed by Japan, with a 9.9% share.
What are the leading importers of lathes for removing metal from Austria?
+
In value terms, the largest markets for lathe for removing metal exported from Austria were Germany ($18M), China ($12M) and the U.S. ($5.9M), together accounting for 60% of total exports. These countries were followed by Russia, the Czech Republic, Switzerland, the UK, Italy, Belarus, the Netherlands and Brazil, which together accounted for a further 26%.
What is the average export price for lathes for removing metal in Austria?
+
In 2020, the average lathe for removing metal export price amounted to $83,908 per unit, with a decrease of -6.7% against the previous year.
What is the average import price for lathes for removing metal in Austria?
+
The average lathe for removing metal import price stood at $86,903 per unit in 2020, approximately reflecting the previous year.

Product coverage:
• Prodcom 28412123 - Numerically controlled horizontal lathes, turning centres, for removing metal
• Prodcom 28412127 - Numerically controlled horizontal lathes, automatic lathes, for removing metal (excluding turning centres)
• Prodcom 28412129 - Numerically controlled horizontal lathes, for removing metal (excluding turning centres, automatic lathes)
• Prodcom 28412140 - Non-numerically controlled horizontal lathes, for removing metal
• Prodcom 28412160 - Lathes, including turning centres, for removing metal (excluding horizontal lathes)

This report provides an in-depth analysis of the market for lathe for removing metal in Austria. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2025.


Country coverage:
• Austria

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in Austria
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1
KEY FINDINGS
2.2
MARKET TRENDS
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2007–2020
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2007–2020
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2020
Table 2:
Market Volume, In Physical Terms, 2007–2020
Table 3:
Market Value, 2007–2020
Table 4:
Per Capita Consumption In 2007–2020
Table 5:
Imports, In Physical Terms, By Country, 2007–2020
Table 6:
Imports, In Value Terms, By Country, 2007–2020
Table 7:
Import Prices, By Country Of Origin, 2007–2020
Table 8:
Exports, In Physical Terms, By Country, 2007–2020
Table 9:
Exports, In Value Terms, By Country, 2007–2020
Table 10:
Export Prices, By Country Of Destination, 2007–2020
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2007–2020
Figure 2:
Market Value, 2007–2020
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007–2020
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007–2020
Figure 5:
Trade Balance, In Physical Terms, 2007–2020
Figure 6:
Trade Balance, In Value Terms, 2007–2020
Figure 7:
Per Capita Consumption, 2007–2020
Figure 8:
Market Forecast To 2025
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2007–2020
Figure 21:
Production, In Value Terms, 2007–2020
Figure 22:
Imports, In Physical Terms, 2007–2020
Figure 23:
Imports, In Value Terms, 2007–2020
Figure 24:
Imports, In Physical Terms, By Country, 2020
Figure 25:
Imports, In Physical Terms, By Country, 2007–2020
Figure 26:
Imports, In Value Terms, By Country, 2007–2020
Figure 27:
Import Prices, By Country Of Origin, 2007–2020
Figure 28:
Exports, In Physical Terms, 2007–2020
Figure 29:
Exports, In Value Terms, 2007–2020
Figure 30:
Exports, In Physical Terms, By Country, 2020
Figure 31:
Exports, In Physical Terms, By Country, 2007–2020
Figure 32:
Exports, In Value Terms, By Country, 2007–2020
Figure 33:
Export Prices, By Country Of Destination, 2007–2020

Webinar: Global Ethanol Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global ethanol market.



Thursday, June 24th, 2021 @ 04:00 pm ET


Register

Webinar: Global Coal Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global сoal market.



Thursday, July 15th, 2021 @ 04:00 pm ET


Register

Webinar: Global Beef Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global beef market.



Thursday, September 16th, 2021 @ 04:00 pm ET


Register
Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data