Asia-Pacific - Blow-Moulding Machines for Working Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingAsia-Pacific: Blow-Moulding Machine Market 2024
Blow-Moulding Machine Market Size in Asia-Pacific
The Asia-Pacific blow-moulding machine market rose to $X in 2022, with an increase of X% against the previous year. In general, consumption continues to indicate a relatively flat trend pattern. As a result, consumption reached the peak level of $X. From 2021 to 2022, the growth of the market failed to regain momentum.
Blow-Moulding Machine Production in Asia-Pacific
In value terms, blow-moulding machine production expanded modestly to $X in 2022 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern remained consistent, with only minor fluctuations being observed in certain years. The most prominent rate of growth was recorded in 2015 when the production volume increased by X% against the previous year. Over the period under review, production reached the maximum level at $X in 2020; however, from 2021 to 2022, production failed to regain momentum.
Blow-Moulding Machine Exports
Exports in Asia-Pacific
In 2022, the amount of blow-moulding machines for working rubber or plastics exported in Asia-Pacific surged to X units, rising by X% on the previous year's figure. Overall, exports continue to indicate a buoyant increase. The growth pace was the most rapid in 2020 when exports increased by X% against the previous year. The volume of export peaked in 2022 and is expected to retain growth in the near future.
In value terms, blow-moulding machine exports declined to $X in 2022. The total export value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern remained consistent, with somewhat noticeable fluctuations throughout the analyzed period. The pace of growth appeared the most rapid in 2021 with an increase of X% against the previous year. As a result, the exports reached the peak of $X, and then dropped in the following year.
Exports by Country
China dominates exports structure, reaching X units, which was approx. X% of total exports in 2022. It was distantly followed by India (X units), constituting a X% share of total exports. Taiwan (Chinese) (X units) took a little share of total exports.
China was also the fastest-growing in terms of the blow-moulding machines for working rubber or plastics exports, with a CAGR of X% from 2012 to 2022. At the same time, India (X%) displayed positive paces of growth. By contrast, Taiwan (Chinese) (X%) illustrated a downward trend over the same period. China (X p.p.) significantly strengthened its position in terms of the total exports, while India and Taiwan (Chinese) saw its share reduced by X% and X% from 2012 to 2022, respectively.
In value terms, China ($X) remains the largest blow-moulding machine supplier in Asia-Pacific, comprising X% of total exports. The second position in the ranking was held by Taiwan (Chinese) ($X), with a X% share of total exports.
From 2012 to 2022, the average annual rate of growth in terms of value in China amounted to X%. The remaining exporting countries recorded the following average annual rates of exports growth: Taiwan (Chinese) (X% per year) and India (X% per year).
Export Prices by Country
In 2022, the export price in Asia-Pacific amounted to $X per unit, declining by X% against the previous year. In general, the export price saw a abrupt slump. The pace of growth was the most pronounced in 2015 an increase of X% against the previous year. The level of export peaked at $X per unit in 2016; however, from 2017 to 2022, the export prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Taiwan (Chinese) ($X per unit), while China ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Taiwan (Chinese) (X%), while the other leaders experienced a decline in the export price figures.
Blow-Moulding Machine Imports
Imports in Asia-Pacific
In 2022, approx. X units of blow-moulding machines for working rubber or plastics were imported in Asia-Pacific; with a decrease of X% compared with the previous year. Over the period under review, imports saw a mild slump. The pace of growth appeared the most rapid in 2020 with an increase of X%. As a result, imports reached the peak of X units. From 2021 to 2022, the growth of imports failed to regain momentum.
In value terms, blow-moulding machine imports expanded rapidly to $X in 2022. Overall, imports saw a noticeable setback. The pace of growth was the most pronounced in 2018 with an increase of X% against the previous year. The level of import peaked at $X in 2014; however, from 2015 to 2022, imports stood at a somewhat lower figure.
Imports by Country
India was the main importing country with an import of around X units, which accounted for X% of total imports. The Philippines (X units) ranks second in terms of the total imports with an X% share, followed by Vietnam (X%), Pakistan (X%), Indonesia (X%), South Korea (X%), Thailand (X%) and Malaysia (X%). The following importers - Singapore (X units), Japan (X units), Cambodia (X units), Bangladesh (X units) and China (X units) - together made up X% of total imports.
India was also the fastest-growing in terms of the blow-moulding machines for working rubber or plastics imports, with a CAGR of X% from 2012 to 2022. At the same time, Cambodia (X%), Pakistan (X%), the Philippines (X%), Vietnam (X%), Singapore (X%) and South Korea (X%) displayed positive paces of growth. Malaysia experienced a relatively flat trend pattern. By contrast, China (X%), Bangladesh (X%), Thailand (X%), Indonesia (X%) and Japan (X%) illustrated a downward trend over the same period. While the share of India (X p.p.), Pakistan (X p.p.), the Philippines (X p.p.), Vietnam (X p.p.), Cambodia (X p.p.), South Korea (X p.p.) and Singapore (X p.p.) increased significantly in terms of the total imports from 2012-2022, the share of Bangladesh (X p.p.), Thailand (X p.p.), Indonesia (X p.p.) and Japan (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, China ($X) constitutes the largest market for imported blow-moulding machines for working rubber or plastics in Asia-Pacific, comprising X% of total imports. The second position in the ranking was held by India ($X), with an X% share of total imports. It was followed by Indonesia, with an X% share.
From 2012 to 2022, the average annual growth rate of value in China amounted to X%. In the other countries, the average annual rates were as follows: India (X% per year) and Indonesia (X% per year).
Import Prices by Country
The import price in Asia-Pacific stood at $X per unit in 2022, with an increase of X% against the previous year. In general, the import price, however, saw a slight curtailment. The growth pace was the most rapid in 2013 an increase of X%. The level of import peaked at $X per unit in 2015; however, from 2016 to 2022, import prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was China ($X per unit), while Singapore ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Japan (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the blow-moulding machine market in Asia-Pacific. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28961040 - Blow-moulding machines for working rubber or plastics or for manufacturing rubber or plastic products
Country coverage:
- Afghanistan
- American Samoa
- Australia
- Bangladesh
- Bhutan
- Brunei Darussalam
- Cambodia
- China
- Cook Islands
- Democratic People's Republic of Korea
- Fiji
- French Polynesia
- Guam
- Hong Kong SAR
- India
- Indonesia
- Japan
- Kiribati
- Lao People's Democratic Republic
- Macao SAR
- Malaysia
- Maldives
- Marshall Islands
- Micronesia
- Myanmar
- Nauru
- Nepal
- New Caledonia
- New Zealand
- Niue
- Northern Mariana Islands
- Pakistan
- Palau
- Papua New Guinea
- Philippines
- Samoa
- Singapore
- Solomon Islands
- South Korea
- Sri Lanka
- Taiwan (Chinese)
- Thailand
- Timor-Leste
- Tokelau
- Tonga
- Tuvalu
- Vanuatu
- Vietnam
- Wallis and Futuna Islands
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Asia-Pacific, split by region and country
- Trade (exports and imports) in Asia-Pacific
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Afghanistan
- Australia
- Bangladesh
- Bhutan
- Brunei Darussalam
- Cambodia
- China
- Hong Kong SAR
- Macao SAR
- Cook Islands
- Fiji
- French Polynesia
- India
- Indonesia
- Japan
- Kiribati
- Malaysia
- Maldives
- Marshall Islands
- Micronesia
- Myanmar
- Nepal
- New Caledonia
- New Zealand
- Northern Mariana Islands
- Pakistan
- Palau
- Papua New Guinea
- Philippines
- Samoa
- Singapore
- Solomon Islands
- South Korea
- Sri Lanka
- Taiwan (Chinese)
- Thailand
- Timor-Leste
- Tokelau
- Tonga
- Tuvalu
- Vanuatu
- Vietnam
- Wallis and Futuna Islands
- Lao People's Democratic Republic
- American Samoa
- Democratic People's Republic of Korea
- Nauru
- Niue
- Guam
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the blow-moulding machine market in Asia.
This report provides an in-depth analysis of the blow-moulding machine market in the U.S..
This report provides an in-depth analysis of the blow-moulding machine market in China.
This report provides an in-depth analysis of the blow-moulding machine market in the EU.
This report provides an in-depth analysis of the global blow-moulding machine market.