Argentina - Injection or Compression Type Moulds for Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingArgentina: Compression Type Mould Market 2024
Compression Type Mould Market Size in Argentina
The Argentinian compression type mould market surged to $X in 2022, with an increase of X% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Over the period under review, consumption showed a measured increase. As a result, consumption reached the peak level of $X. From 2016 to 2022, the growth of the market failed to regain momentum.
Compression Type Mould Exports
Exports from Argentina
In 2022, approx. X units of injection or compression type moulds for rubber or plastics were exported from Argentina; approximately equating the previous year's figure. Overall, exports saw a deep slump. The most prominent rate of growth was recorded in 2013 when exports increased by X%. Over the period under review, the exports reached the peak figure at X units in 2018; however, from 2019 to 2022, the exports stood at a somewhat lower figure.
In value terms, compression type mould exports totaled $X in 2022. Over the period under review, exports faced a deep contraction. The growth pace was the most rapid in 2018 when exports increased by X%. As a result, the exports attained the peak of $X. From 2019 to 2022, the growth of the exports failed to regain momentum.
Exports by Country
Brazil (X units) was the main destination for compression type mould exports from Argentina, with a X% share of total exports. Moreover, compression type mould exports to Brazil exceeded the volume sent to the second major destination, Paraguay (X units), more than tenfold.
From 2012 to 2022, the average annual rate of growth in terms of volume to Brazil totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Paraguay (X% per year) and Uruguay (X% per year).
From 2012 to 2022, the average annual rate of growth in terms of value to Brazil stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Paraguay (X% per year) and Uruguay (X% per year).
Export Prices by Country
In 2022, the average compression type mould export price amounted to $X per unit, approximately equating the previous year. Over the period under review, the export price saw a abrupt setback. The most prominent rate of growth was recorded in 2015 when the average export price increased by X% against the previous year. Over the period under review, the average export prices attained the peak figure at $X per unit in 2012; however, from 2013 to 2022, the export prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Uruguay ($X per unit), while the average price for exports to Brazil ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Costa Rica (X%), while the prices for the other major destinations experienced mixed trend patterns.
Join Us at HANNOVER MESSE 2024
Don’t miss your chance to connect with us directly. Schedule a personal meeting to dive deeper into how solutions.
Hall 002, Stand C10. 22 - 26 April 2024 | Hannover, Germany
Compression Type Mould Imports
Imports into Argentina
In 2022, purchases abroad of injection or compression type moulds for rubber or plastics increased by X% to X units, rising for the second consecutive year after two years of decline. Over the period under review, total imports indicated a temperate expansion from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. Imports peaked at X units in 2015; however, from 2016 to 2022, imports remained at a lower figure.
In value terms, compression type mould imports surged to $X in 2022. In general, imports recorded a temperate expansion. The most prominent rate of growth was recorded in 2015 when imports increased by X% against the previous year. As a result, imports attained the peak of $X. From 2016 to 2022, the growth of imports failed to regain momentum.
Imports by Country
China (X units), Brazil (X units) and South Korea (X units) were the main suppliers of compression type mould imports to Argentina, together comprising X% of total imports. Australia, Portugal and Taiwan (Chinese) lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the biggest increases were recorded for Australia (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, China ($X), Brazil ($X) and South Korea ($X) constituted the largest compression type mould suppliers to Argentina, with a combined X% share of total imports. Australia, Portugal and Taiwan (Chinese) lagged somewhat behind, together accounting for a further X%.
Australia, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, among the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average compression type mould import price stood at $X per unit in 2022, falling by X% against the previous year. In general, the import price showed a relatively flat trend pattern. The growth pace was the most rapid in 2020 when the average import price increased by X%. The import price peaked at $X per unit in 2015; however, from 2016 to 2022, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Brazil ($X per unit), while the price for Taiwan (Chinese) ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Taiwan (Chinese) (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the compression type mould market in Argentina. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735070 - Injection or compression type moulds for rubber or plastics
Country coverage:
- Argentina
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Argentina
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the compression type mould market in Asia.
This report provides an in-depth analysis of the compression type mould market in the U.S..
This report provides an in-depth analysis of the compression type mould market in China.
This report provides an in-depth analysis of the compression type mould market in the EU.
This report provides an in-depth analysis of the global compression type mould market.