Africa - Plastic Plates, Sheets, Film, Foil and Strip - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingAfrica: Market for Plastic Plates, Sheets, Film, Foil And Strip 2024
Market Size for Plastic Plates, Sheets, Film, Foil And Strip in Africa
The African market for plastic plates, sheets, film, foil and strip amounted to $X in 2022, rising by X% against the previous year. The total consumption indicated a temperate increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption decreased by X% against 2020 indices. As a result, consumption attained the peak level of $X. From 2021 to 2022, the growth of the market remained at a somewhat lower figure.
Production of Plastic Plates, Sheets, Film, Foil And Strip in Africa
In value terms, production of plastic plates, sheets, film, foil and strip rose markedly to $X in 2022 estimated in export price. The total production indicated a prominent expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The most prominent rate of growth was recorded in 2020 when the production volume increased by X% against the previous year. As a result, production attained the peak level of $X. From 2021 to 2022, production of growth remained at a somewhat lower figure.
Exports of Plastic Plates, Sheets, Film, Foil And Strip
Exports in Africa
Exports of plastic plates, sheets, film, foil and strip stood at X tons in 2022, approximately mirroring 2021. Total exports indicated a strong increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. Over the period under review, the exports of hit record highs in 2022 and are likely to continue growth in the near future.
In value terms, exports of plastic plates, sheets, film, foil and strip expanded slightly to $X in 2022. Total exports indicated a prominent increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, the exports of attained the maximum in 2022 and are likely to see gradual growth in the immediate term.
Exports by Country
Egypt was the main exporting country with an export of around X tons, which amounted to X% of total exports. Tunisia (X tons) ranks second in terms of the total exports with an X% share, followed by South Africa (X%) and Nigeria (X%). Cote d'Ivoire (X tons), Equatorial Guinea (X tons) and Kenya (X tons) took a relatively small share of total exports.
From 2012 to 2022, average annual rates of growth with regard to plastic plate, sheet, film, foil and strip exports from Egypt stood at X%. At the same time, Equatorial Guinea (X%), Nigeria (X%), Cote d'Ivoire (X%), Kenya (X%), South Africa (X%) and Tunisia (X%) displayed positive paces of growth. Moreover, Equatorial Guinea emerged as the fastest-growing exporter exported in Africa, with a CAGR of X% from 2012-2022. From 2012 to 2022, the share of Nigeria, Equatorial Guinea and Egypt increased by X, X and X percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Egypt ($X) remains the largest plastic plate, sheet, film, foil and strip supplier in Africa, comprising X% of total exports. The second position in the ranking was taken by South Africa ($X), with a X% share of total exports. It was followed by Tunisia, with an X% share.
In Egypt, exports of plastic plates, sheets, film, foil and strip expanded at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: South Africa (X% per year) and Tunisia (X% per year).
Export Prices by Country
The export price in Africa stood at $X per ton in 2022, increasing by X% against the previous year. Overall, the export price continues to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2020 an increase of X%. Over the period under review, the export prices reached the maximum in 2022 and is expected to retain growth in the near future.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Kenya ($X per ton), while Tunisia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Cote d'Ivoire (X%), while the other leaders experienced more modest paces of growth.
Imports of Plastic Plates, Sheets, Film, Foil And Strip
Imports in Africa
In 2022, supplies from abroad of plastic plates, sheets, film, foil and strip decreased by X% to X tons for the first time since 2011, thus ending a ten-year rising trend. Total imports indicated tangible growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2012 indices. The pace of growth was the most pronounced in 2018 when imports increased by X%. Over the period under review, imports of hit record highs at X tons in 2021, and then reduced slightly in the following year.
In value terms, imports of plastic plates, sheets, film, foil and strip reached $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2021 when imports increased by X% against the previous year. The level of import peaked in 2022 and is expected to retain growth in the near future.
Imports by Country
South Africa (X tons), Morocco (X tons), Algeria (X tons), Egypt (X tons), Nigeria (X tons), Tunisia (X tons), Kenya (X tons), Ghana (X tons), Ethiopia (X tons), Libya (X tons), Tanzania (X tons) and Democratic Republic of the Congo (X tons) represented roughly X% of total imports in 2022. Zambia (X tons) followed a long way behind the leaders.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the key importing countries, was attained by Democratic Republic of the Congo (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, South Africa ($X), Morocco ($X) and Algeria ($X) appeared to be the countries with the highest levels of imports in 2022, with a combined X% share of total imports. Egypt, Tunisia, Nigeria, Ghana, Kenya, Ethiopia, Zambia, Libya, Democratic Republic of the Congo and Tanzania lagged somewhat behind, together accounting for a further X%.
Democratic Republic of the Congo, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, among the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the import price in Africa amounted to $X per ton, picking up by X% against the previous year. In general, the import price, however, saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 when the import price increased by X% against the previous year. Over the period under review, import prices hit record highs at $X per ton in 2012; afterwards, it flattened through to 2022.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Egypt ($X per ton), while Tanzania ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Ethiopia (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in Africa. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22213010 - Other plates..., of polymers of ethylene, not reinforced, t hickness . 0,125 mm
- Prodcom 22213017 - Other plates..., of polymers of ethylene, not reinforced, etc., t hickness > 0,125 mm
- Prodcom 22213021 - Other plates..., of biaxially orientated polymers of propylene, t hickness . 0,10 mm
- Prodcom 22213023 - Other plates..., of polymers of propylene, thickness . 0,10 mm, others
- Prodcom 22213026 - Strip of polymers of propylene, of a thickness of > 0,10 mm and a width of > 5 mm but . .20 mm, of the kind used for packaging (excluding self-adhesive products)
- Prodcom 22213030 - Other plates..., of polymers of styrene, not reinforced, etc.
- Prodcom 22213035 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213036 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213037 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213038 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213053 - Plates..., of polymethyl methacrylate, not reinforced, etc.
- Prodcom 22213059 - Plates..., of other acrylic polymers, not reinforced, etc., n.e.c.
- Prodcom 22213061 - Plates, sheets, film, foil, strip of polycarbonates, non-cellular excluding floor, wall, ceiling coverings - self-adhesive, r einforced, laminated, supported/similarly combined with other materials
- Prodcom 22213063 - Plates..., of unsaturated polyesters, not reinforced, etc.
- Prodcom 22213065 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness . 0,35 mm
- Prodcom 22213067 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness > 0,35 mm
- Prodcom 22213069 - Plates, sheets, film, foil, strip of polyesters, non-cellular excluding floor, wall, ceiling coverings, self-adhesive - of polycarbonates, polyethylene terephthalate, unsaturated polyesters
- Prodcom 22213070 - Plates, sheets, film, foil and strip, of non-cellular cellulose or its chemical derivatives, not reinforced, laminated, supported or similarly combined with other materials (excluding selfadhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213082 - Plates, sheets, film, foil, strip of polyamides, non-cellular (excluding floor, wall, ceiling coverings, self-adhesive, r einforced, laminated, supported/similarly combined with other materials)
- Prodcom 22213086 - Plates, sheets, film, foil and strip, of non-cellular poly(vinyl butyral), amino-resins, phenolic resins or polymerisation products, not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213090 - Plates, sheets, film, foil and strip, of non-cellular plastics, n .e.c., not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products, floor, wall and ceiling coverings of HS
Country coverage:
- Algeria
- Angola
- Benin
- Botswana
- Burkina Faso
- Burundi
- Cabo Verde
- Cameroon
- Central African Republic
- Chad
- Comoros
- Congo
- Cote d'Ivoire
- Democratic Republic of the Congo
- Djibouti
- Egypt
- Equatorial Guinea
- Eritrea
- Ethiopia
- Gabon
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Kenya
- Lesotho
- Liberia
- Libya
- Madagascar
- Malawi
- Mali
- Mauritania
- Mauritius
- Mayotte
- Morocco
- Mozambique
- Namibia
- Niger
- Nigeria
- Reunion
- Rwanda
- Saint Helena, Ascension and Tristan da Cunha
- Sao Tome and Principe
- Senegal
- Seychelles
- Sierra Leone
- Somalia
- South Africa
- South Sudan
- Sudan
- Swaziland
- Tanzania
- Togo
- Tunisia
- Uganda
- Western Sahara
- Zambia
- Zimbabwe
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Africa, split by region and country
- Trade (exports and imports) in Africa
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Algeria
- Angola
- Benin
- Botswana
- Burkina Faso
- Burundi
- Cabo Verde
- Cameroon
- Central African Republic
- Chad
- Comoros
- Congo
- Democratic Republic of the Congo
- Djibouti
- Egypt
- Equatorial Guinea
- Eritrea
- Ethiopia
- Gabon
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Kenya
- Lesotho
- Liberia
- Libya
- Madagascar
- Malawi
- Mali
- Mauritania
- Mauritius
- Mayotte
- Morocco
- Mozambique
- Namibia
- Niger
- Nigeria
- Reunion
- Rwanda
- Saint Helena, Ascension and Tristan da Cunha
- Sao Tome and Principe
- Senegal
- Seychelles
- Sierra Leone
- Somalia
- South Africa
- Sudan
- Swaziland
- Tanzania
- Togo
- Tunisia
- Uganda
- Zambia
- Zimbabwe
- Cote d'Ivoire
- Western Sahara
- South Sudan
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in Asia.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the U.S..
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in China.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the EU.
This report provides an in-depth analysis of the global market for plastic plate, sheet, film, foil and strip.