Latest Report Update: Apr 17, 2021

United Kingdom - Interchangeable Tools For Hand Tools - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Licenses

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service and Privacy Policy. We'll occasionally send you account related emails.

United Kingdom: Interchangeable Tool Market Overview 2021

Interchangeable Tool Market Size in the UK

The UK interchangeable tool market fell to $X in 2019, which is down by -X% against the previous year. The market value increased at an average annual rate of +X% from 2007 to 2019; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2010 when the market value increased by X% year-to-year. Over the period under review, the market attained the peak level at $X in 2018, and then reduced in the following year.

Interchangeable Tool Production in the UK

In value terms, interchangeable tool production dropped to $X in 2019 estimated in export prices. Over the period under review, production continues to indicate a pronounced slump. The pace of growth appeared the most rapid in 2014 with an increase of X% y-o-y. Interchangeable tool production peaked at $X in 2007; however, from 2008 to 2019, production remained at a lower figure.

Interchangeable Tool Exports

Exports from the UK

In 2019, overseas shipments of interchangeable tools for hand tools increased by X% to X units, rising for the third consecutive year after three years of decline. Over the period under review, exports, however, continue to indicate a abrupt setback. The most prominent rate of growth was recorded in 2011 when exports increased by X% y-o-y. Exports peaked at X units in 2008; however, from 2009 to 2019, exports failed to regain the momentum.

In value terms, interchangeable tool exports shrank to $X in 2019. Overall, exports, however, recorded a abrupt decline. The pace of growth appeared the most rapid in 2011 when exports increased by X% year-to-year. Exports peaked at $X in 2007; however, from 2008 to 2019, exports failed to regain the momentum.

Exports by Country

Norway (X units), Germany (X units) and the U.S. (X units) were the main destinations of interchangeable tool exports from the UK, together accounting for X% of total exports.

From 2007 to 2019, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Norway, while exports for the other leaders experienced more modest paces of growth.

In value terms, the largest markets for interchangeable tool exported from the UK were the U.S. ($X), Germany ($X) and Ireland ($X), together accounting for X% of total exports. The Netherlands, France, Poland, Australia, the United Arab Emirates, Saudi Arabia, Norway, Sweden, Belgium and Turkey lagged somewhat behind, together comprising a further X the main countries of destination, Poland recorded the highest growth rate of the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The average interchangeable tool export price stood at $X per unit in 2019, which is down by -X% against the previous year. Over the last twelve years, it increased at an average annual rate of +X%. The most prominent rate of growth was recorded in 2009 when the average export price increased by X% year-to-year. The export price peaked at $X per unit in 2015; however, from 2016 to 2019, export prices stood at a somewhat lower figure.

There were significant differences in the average prices for the major external markets. In 2019, the country with the highest price was the U.S. ($X per unit), while the average price for exports to Norway ($X per unit) was amongst the lowest.

From 2007 to 2019, the most notable rate of growth in terms of prices was recorded for supplies to Ireland, while the prices for the other major destinations experienced more modest paces of growth.

Interchangeable Tool Imports

Imports into the UK

In 2019, supplies from abroad of interchangeable tools for hand tools increased by X% to X units, rising for the second year in a row after two years of decline. Overall, imports showed a relatively flat trend pattern. The growth pace was the most rapid in 2008 when imports increased by X% y-o-y. As a result, imports attained the peak of X units. From 2009 to 2019, the growth imports remained at a lower figure.

In value terms, interchangeable tool imports fell to $X in 2019. In general, imports saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2010 when imports increased by X% against the previous year. Over the period under review, imports reached the peak figure at $X in 2008; however, from 2009 to 2019, imports stood at a somewhat lower figure.

Imports by Country

In 2019, China (X units) constituted the largest interchangeable tool supplier to the UK, with a X% share of total imports. Moreover, interchangeable tool imports from China exceeded the figures recorded by the second-largest supplier, Germany (X units), fourfold. The third position in this ranking was occupied by Japan (X units), with a X% share.

From 2007 to 2019, the average annual growth rate of volume from China stood at +X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (-X% per year) and Japan (+X% per year).

In value terms, China ($X), Germany ($X) and the U.S. ($X) constituted the largest interchangeable tool suppliers to the UK, together accounting for X% of total imports.

Among the main suppliers, China saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2019, the average interchangeable tool import price amounted to $X per unit, shrinking by -X% against the previous year. Overall, the import price showed a relatively flat trend pattern. The pace of growth was the most pronounced in 2009 when the average import price increased by X% year-to-year. The import price peaked at $X per unit in 2011; however, from 2012 to 2019, import prices remained at a lower figure.

Prices varied noticeably by the country of origin; the country with the highest price was the U.S. ($X per unit), while the price for China ($X per unit) was amongst the lowest.

From 2007 to 2019, the most notable rate of growth in terms of prices was attained by the U.S., while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox AI Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for interchangeable tools for hand tools in the world?
+
China (534M units) constituted the country with the largest volume of interchangeable tool consumption, accounting for 27% of total volume. Moreover, interchangeable tool consumption in China exceeded the figures recorded by the second-largest consumer, the U.S. (257M units), twofold. Germany (150M units) ranked third in terms of total consumption with a 7.6% share.
What are the largest producers of interchangeable tools for hand tools in the world?
+
The country with the largest volume of interchangeable tool production was China (771M units), accounting for 39% of total volume. Moreover, interchangeable tool production in China exceeded the figures recorded by the second-largest producer, the U.S. (202M units), fourfold. Japan (191M units) ranked third in terms of total production with a 9.5% share.
What are the leading suppliers of interchangeable tools for hand tools to the UK?
+
In value terms, China ($116M), Germany ($116M) and the U.S. ($78M) constituted the largest interchangeable tool suppliers to the UK, with a combined 62% share of total imports.
What are the leading importers of interchangeable tools for hand tools from the UK?
+
In value terms, the U.S. ($47M), Germany ($35M) and Ireland ($24M) were the largest markets for interchangeable tool exported from the UK worldwide, with a combined 30% share of total exports. The Netherlands, France, Poland, Australia, the United Arab Emirates, Saudi Arabia, Norway, Sweden, Belgium and Turkey lagged somewhat behind, together accounting for a further 29%.
What is the average export price for interchangeable tools for hand tools in the UK?
+
The average interchangeable tool export price stood at $29 per unit in 2019, declining by -9.8% against the previous year.
What is the average import price for interchangeable tools for hand tools in the UK?
+
The average interchangeable tool import price stood at $20 per unit in 2019, dropping by -13% against the previous year.

Product coverage:
• Prodcom 25734014 - Tapping tools for working metal
• Prodcom 25734016 - Threading tools for working metal
• Prodcom 25734019 - Tapping or threading tools (excluding work and tool holders for machines or hand tools, for working metal)
• Prodcom 25734023 - Drilling tools with working part of diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools, for rock drilling)
• Prodcom 25734025 - Masonry drills with working part of materials other than diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools, for rock drilling)
• Prodcom 25734027 - Drilling tools with working part of sintered metal carbide, for working metal excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
• Prodcom 25734031 - Drilling tools with working part of high speed steel, for working metal excluding work and tool holders for machines or hand tools - for rock drilling
• Prodcom 25734033 - Drilling tools with working part of materials other than diamond, agglomerated diamond or sintered metal carbide, f or working metal excluding with working part of high speed steel
• Prodcom 25734035 - Drilling tools (excluding work and tool holders for machines or hand tools, with working part of diamond or agglomerated diamond, for rock drilling, masonry drills, for working metal)
• Prodcom 25734037 - Boring or broaching tools with working part of diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools, for earth boring)
• Prodcom 25734044 - Boring tools for working metal, with working part of materials other than diamond or agglomerated diamond
• Prodcom 25734045 - Boring or broaching tools (excluding work and tool holders for machines or hand tools, with diamond or agglomerated diamond working parts, for working metal, for earth boring)
• Prodcom 25734048 - Broaching tools for working metal, with working part of materials other than diamond or agglomerated diamond
• Prodcom 25734050 - Milling tools with working part of sintered metal carbide, for working metal excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
• Prodcom 25734061 - Shank type milling tools for working metal (excluding with working part of sintered metal carbide)
• Prodcom 25734065 -
• Prodcom 25734067 -
• Prodcom 25734069 - Milling tools (excluding for working metal)
• Prodcom 25734071 - Turning tools with working part of sintered metal carbide, for working metal excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
• Prodcom 25734074 - Turning tools for working metal, with working part of materials other than cermets
• Prodcom 25734079 - Turning tools (excluding work and tool holders for machines or hand tools, for working metal)
• Prodcom 25734081 - Other interchangeable tools of CN .82.07 with working part of diamond
• Prodcom 25734083 - Screwdriver bits with working part of materials other than diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools)
• Prodcom 25734085 - Gear-cutting tools with working part of materials other than diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools)
• Prodcom 25734087 - Interchangeable hand tools with working part of sintered metal carbide excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
• Prodcom 25734089 - Interchangeable tools in other materials
• Prodcom 25736013 - Rock drilling or earth boring tools with working part of cermets
• Prodcom 25736018 - Rock-drilling or earth-boring tools, interchangeable, and parts therefor, with working parts of materials other than sintered metal carbide or cermets
• Prodcom 25736023 - Dies for drawing or extruding metal, with working part of diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools)
• Prodcom 25736024 - Dies for drawing or extruding metal (excluding unmounted plates, sticks, tips, rods, pellets, rings, etc. of sintered metal carbides or cermets)
• Prodcom 25736033 - Pressing, stamping or punching tools for working metal (excluding work and tool holders for machines or hand tools)
• Prodcom 25736039 - Pressing, stamping or punching tools (excluding work and tool holders for machines or hand tools, for working metal)

This report provides an in-depth analysis of the interchangeable tool market in the UK. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2025.


Country coverage:
• United Kingdom

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in the UK
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1
KEY FINDINGS
2.2
MARKET TRENDS
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2007–2020
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2007–2020
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2020
Table 2:
Market Volume, In Physical Terms, 2007–2020
Table 3:
Market Value, 2007–2020
Table 4:
Per Capita Consumption In 2007–2020
Table 5:
Imports, In Physical Terms, By Country, 2007–2020
Table 6:
Imports, In Value Terms, By Country, 2007–2020
Table 7:
Import Prices, By Country Of Origin, 2007–2020
Table 8:
Exports, In Physical Terms, By Country, 2007–2020
Table 9:
Exports, In Value Terms, By Country, 2007–2020
Table 10:
Export Prices, By Country Of Destination, 2007–2020
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2007–2020
Figure 2:
Market Value, 2007–2020
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007–2020
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007–2020
Figure 5:
Trade Balance, In Physical Terms, 2007–2020
Figure 6:
Trade Balance, In Value Terms, 2007–2020
Figure 7:
Per Capita Consumption, 2007–2020
Figure 8:
Market Forecast To 2025
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2007–2020
Figure 21:
Production, In Value Terms, 2007–2020
Figure 22:
Imports, In Physical Terms, 2007–2020
Figure 23:
Imports, In Value Terms, 2007–2020
Figure 24:
Imports, In Physical Terms, By Country, 2020
Figure 25:
Imports, In Physical Terms, By Country, 2007–2020
Figure 26:
Imports, In Value Terms, By Country, 2007–2020
Figure 27:
Import Prices, By Country Of Origin, 2007–2020
Figure 28:
Exports, In Physical Terms, 2007–2020
Figure 29:
Exports, In Value Terms, 2007–2020
Figure 30:
Exports, In Physical Terms, By Country, 2020
Figure 31:
Exports, In Physical Terms, By Country, 2007–2020
Figure 32:
Exports, In Value Terms, By Country, 2007–2020
Figure 33:
Export Prices, By Country Of Destination, 2007–2020

Webinar: Global Graphite Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global graphite market.



Tuesday, May 18th, 2021 @ 04:00 pm ET


Register

Webinar: Global Coal Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global сoal market.



Tuesday, June 1st, 2021 @ 04:00 pm ET


Register

Webinar: Global Biodiesel Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global biodiesel market.



Thursday, June 10th, 2021 @ 04:00 pm ET


Register
Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data