Latest Report Update: Oct 9, 2021

Netherlands - Crude Steel And Steel Semi-Finished Products - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Licenses

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service, Privacy Policy and Licenses. We'll occasionally send you account related emails.

Netherlands: Overview of the Market for Raw Steel And Steel Semi-Finished Products 2021

Market Size for Raw Steel And Steel Semi-Finished Products in the Netherlands

In 2020, after two years of growth, there was significant decline in the Dutch market for raw steel and steel semi-finished products, when its value decreased by -X% to $X. The market value increased at an average annual rate of +X% from 2007 to 2020; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2008 with an increase of X% y-o-y. Over the period under review, the market attained the maximum level at $X in 2019, and then fell in the following year.

Production of Raw Steel And Steel Semi-Finished Products in the Netherlands

In value terms, production of raw steel and steel semi-finished products declined significantly to $X in 2020 estimated in export prices. Over the period under review, the total production indicated perceptible growth from 2007 to 2020: its value decreased at an average annual rate of -X% over the last thirteen-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, production increased by +X% against 2016 indices. The growth pace was the most rapid in 2008 when the production volume increased by X% against the previous year. Over the period under review, production reached the peak level at $X in 2019, and then contracted remarkably in the following year.

Exports of Raw Steel And Steel Semi-Finished Products

Exports from the Netherlands

In 2020, shipments abroad of raw steel and steel semi-finished products decreased by -X% to X tonnes, falling for the third consecutive year after three years of growth. In general, exports recorded a abrupt decrease. The growth pace was the most rapid in 2011 when exports increased by X% year-to-year. As a result, exports reached the peak of X tonnes. from 2012 to 2020, the growth of exports failed to regain the momentum.

In value terms, exports of raw steel and steel semi-finished products plummeted to $X in 2020. Overall, exports saw a abrupt decline. The most prominent rate of growth was recorded in 2011 when exports increased by X% against the previous year. As a result, exports reached the peak of $X. from 2012 to 2020, the growth of exports failed to regain the momentum.

Exports by Country

Mexico (X tonnes) was the main destination for exports of raw steel and steel semi-finished products from the Netherlands, accounting for a X% share of total exports. Moreover, exports of raw steel and steel semi-finished products to Mexico exceeded the volume sent to the second major destination, Turkey (X tonnes), threefold. Germany (X tonnes) ranked third in terms of total exports with a X% share.

From 2007 to 2020, the average annual growth rate of volume to Mexico stood at +X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Turkey (+X% per year) and Germany (-X% per year).

In value terms, Mexico ($X) emerged as the key foreign market for raw steel and steel semi-finished products exports from the Netherlands, comprising X% of total exports. The second position in the ranking was occupied by Germany ($X), with a X% share of total exports. It was followed by Turkey, with a X% share.

From 2007 to 2020, the average annual rate of growth in terms of value to Mexico amounted to +X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Germany (-X% per year) and Turkey (+X% per year).

Export Prices by Country

In 2020, the average export price for raw steel and steel semi-finished products amounted to $X per tonne, waning by -X% against the previous year. Over the period under review, export price indicated pronounced growth from 2007 to 2020: its price increased at an average annual rate of +X% over the last thirteen years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, export price for raw steel and steel semi-finished products increased by +X% against 2016 indices. The most prominent rate of growth was recorded in 2008 an increase of X% against the previous year. As a result, export price reached the peak level of $X per tonne. from 2009 to 2020, the growth in terms of the average export prices failed to regain the momentum.

There were significant differences in the average prices for the major export markets. In 2020, the country with the highest price was Germany ($X per tonne), while the average price for exports to Morocco ($X per tonne) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was recorded for supplies to Germany, while the prices for the other major destinations experienced more modest paces of growth.

Imports of Raw Steel And Steel Semi-Finished Products

Imports into the Netherlands

In 2020, purchases abroad of raw steel and steel semi-finished products was finally on the rise to reach X tonnes after three years of decline. Overall, imports, however, showed a slight curtailment. The pace of growth was the most pronounced in 2010 with an increase of X% against the previous year. Over the period under review, imports reached the peak figure at X tonnes in 2011; however, from 2012 to 2020, imports stood at a somewhat lower figure.

In value terms, imports of raw steel and steel semi-finished products skyrocketed to $X in 2020. Over the period under review, imports, however, continue to indicate a mild increase. The growth pace was the most rapid in 2011 when imports increased by X% y-o-y. As a result, imports attained the peak of $X. from 2012 to 2020, the growth of imports remained at a somewhat lower figure.

Imports by Country

Germany (X tonnes), the UK (X tonnes) and Belgium (X tonnes) were the main suppliers of imports of raw steel and steel semi-finished products to the Netherlands, with a combined X% share of total imports.

From 2007 to 2020, the biggest increases were in the UK, while purchases for the other leaders experienced more modest paces of growth.

In value terms, the largest raw steel and steel semi-finished products suppliers to the Netherlands were the UK ($X), Germany ($X) and Belgium ($X), with a combined X% share of total imports. These countries were followed by Poland, Russia, Sweden and Slovakia, which together accounted for a further X terms of the main suppliers, Slovakia recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2020, the average import price for raw steel and steel semi-finished products amounted to $X per tonne, picking up by X% against the previous year. Overall, import price indicated temperate growth from 2007 to 2020: its price increased at an average annual rate of +X% over the last thirteen years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, import price for raw steel and steel semi-finished products increased by +X% against 2016 indices. The growth pace was the most rapid in 2017 an increase of X% y-o-y. The import price peaked in 2020 and is likely to continue growth in the immediate term.

There were significant differences in the average prices amongst the major supplying countries. In 2020, the country with the highest price was Poland ($X per tonne), while the price for Germany ($X per tonne) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was attained by Russia, while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for raw steel and steel semi-finished products in the world?
+
China (1,065M tonnes) constituted the country with the largest volume of consumption of raw steel and steel semi-finished products, accounting for 57% of total volume. Moreover, consumption of raw steel and steel semi-finished products in China exceeded the figures recorded by the second-largest consumer, India (97M tonnes), more than tenfold. Japan (79M tonnes) ranked third in terms of total consumption with a 4.2% share.
What are the largest producers of raw steel and steel semi-finished products in the world?
+
China (1,065M tonnes) constituted the country with the largest volume of production of raw steel and steel semi-finished products, accounting for 56% of total volume. Moreover, production of raw steel and steel semi-finished products in China exceeded the figures recorded by the second-largest producer, India (100M tonnes), more than tenfold. The third position in this ranking was occupied by Japan (83M tonnes), with a 4.4% share.
What are the leading suppliers of raw steel and steel semi-finished products to the Netherlands?
+
In value terms, the UK ($50M), Germany ($46M) and Belgium ($24M) were the largest raw steel and steel semi-finished products suppliers to the Netherlands, with a combined 65% share of total imports. These countries were followed by Poland, Russia, Sweden and Slovakia, which together accounted for a further 17%.
What are the leading importers of raw steel and steel semi-finished products from the Netherlands?
+
In value terms, Mexico ($47M) emerged as the key foreign market for raw steel and steel semi-finished products exports from the Netherlands, comprising 35% of total exports. The second position in the ranking was occupied by Germany ($21M), with a 15% share of total exports. It was followed by Turkey, with a 12% share.
What is the average export price for raw steel and steel semi-finished products in the Netherlands?
+
The average export price for raw steel and steel semi-finished products stood at $733 per tonne in 2020, with a decrease of -3.4% against the previous year.
What is the average import price for raw steel and steel semi-finished products in the Netherlands?
+
The average import price for raw steel and steel semi-finished products stood at $1,013 per tonne in 2020, picking up by 15% against the previous year.

Product coverage:

This report provides an in-depth analysis of the market for raw steel and steel semi-finished products in the Netherlands. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2025.


Country coverage:
• Netherlands

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in the Netherlands
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1
KEY FINDINGS
2.2
MARKET TRENDS
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2007–2020
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2007–2020
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2020
Table 2:
Market Volume, In Physical Terms, 2007–2020
Table 3:
Market Value, 2007–2020
Table 4:
Per Capita Consumption In 2007–2020
Table 5:
Imports, In Physical Terms, By Country, 2007–2020
Table 6:
Imports, In Value Terms, By Country, 2007–2020
Table 7:
Import Prices, By Country Of Origin, 2007–2020
Table 8:
Exports, In Physical Terms, By Country, 2007–2020
Table 9:
Exports, In Value Terms, By Country, 2007–2020
Table 10:
Export Prices, By Country Of Destination, 2007–2020
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2007–2020
Figure 2:
Market Value, 2007–2020
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007–2020
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007–2020
Figure 5:
Trade Balance, In Physical Terms, 2007–2020
Figure 6:
Trade Balance, In Value Terms, 2007–2020
Figure 7:
Per Capita Consumption, 2007–2020
Figure 8:
Market Forecast To 2030
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2007–2020
Figure 21:
Production, In Value Terms, 2007–2020
Figure 22:
Imports, In Physical Terms, 2007–2020
Figure 23:
Imports, In Value Terms, 2007–2020
Figure 24:
Imports, In Physical Terms, By Country, 2020
Figure 25:
Imports, In Physical Terms, By Country, 2007–2020
Figure 26:
Imports, In Value Terms, By Country, 2007–2020
Figure 27:
Import Prices, By Country Of Origin, 2007–2020
Figure 28:
Exports, In Physical Terms, 2007–2020
Figure 29:
Exports, In Value Terms, 2007–2020
Figure 30:
Exports, In Physical Terms, By Country, 2020
Figure 31:
Exports, In Physical Terms, By Country, 2007–2020
Figure 32:
Exports, In Value Terms, By Country, 2007–2020
Figure 33:
Export Prices, By Country Of Destination, 2007–2020

Solar Energy Market: Getting to Net-Zero amid Energy Crisis



Join our live webinar to get insights into the global solar energy market.



Thursday, November 4th, 2021 @ 03:00 pm ET


Register

Wind Energy Market: Getting to Net-Zero amid Energy Crisis



Join our live webinar to get insights into the global wind energy market.



Thursday, November 11th, 2021 @ 04:00 pm ET


Register

Biogas Market: Getting to Net-Zero amid Energy Crisis



Join our live webinar to get insights into the global biogas market.



Thursday, November 18th, 2021 @ 04:00 pm ET


Register
Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data