Other Fabricated Metal Products

Browse Popular Categories

Blog / Fabricated Metal Products / Other Fabricated Metal Products

Other Fabricated Metal Products
Blog, Anna Sergeeva, May 28, 2018 19

In 2016, the amount of container imported worldwide totaled 2.9M tonnes, going up by 3% against the previous year figure. The total import volume increased at an average annual rate of +1.1% over the period from 2007 to 2016; the trend pattern remained consistent, with somewhat noticeable fluctuations over the period under review. The growth pace was the most rapid in 2010, when import increased by 8% from the previous year level.

Other Fabricated Metal Products
Blog, Anna Sergeeva, May 28, 2018 19

Global stranded wire imports totaled 5.1M tonnes in 2016, import ,therefore, remained relatively stable against the previous year level.

Other Fabricated Metal Products
Blog, Anna Sergeeva, May 28, 2018 22

Global steel spring imports totaled 2.4M tonnes in 2016, ascending by 2% against the previous year level.

 
Other Fabricated Metal Products
Blog, Sergey Avramenko, May 28, 2018 22

In 2016, the global imports of nail and bolt totaled 3.1M tonnes, going down by -5.9% against the previous year level.

Other Fabricated Metal Products
Blog, Anna Sergeeva, May 28, 2018 16

In 2016, the amount of metal advertising sign imported worldwide amounted to 68K tonnes, falling by -2.8% against the previous year level.

Other Fabricated Metal Products
Blog, Anna Sergeeva, May 28, 2018 15

Global container exports stood at 1.8M tonnes in 2016, approximately reflecting the previous year level.

 
Other Fabricated Metal Products
Blog, Sergey Avramenko, May 28, 2018 18

In 2016, the amount of stranded wire exported worldwide stood at 3.2M tonnes, surging by 2% against the previous year level.

Other Fabricated Metal Products
Blog, Anna Sergeeva, May 28, 2018 16

In 2016, approx. 1.5M tonnes of steel spring were exported worldwide; standing approx. at the previous year level.

Other Fabricated Metal Products
Blog, Anna Sergeeva, May 28, 2018 15

Global nail and bolt exports stood at 1.8M tonnes in 2016, falling by -3.1% against the previous year figure. Overall, nail and bolt exports continue to indicate a mild setback. The most prominent rate of growth was recorded in 2010, when exports increased by 9% y-o-y. Over the period under review, global nail and bolt exports attained its maximum volume of 2M tonnes in 2007; however, from 2008 to 2016, it failed to regain its strength. In value terms, nail and bolt exports stood at $2.3B in 2016. In general, nail and bolt exports continue to indicate a relatively flat trend pattern. In that year, global nail and bolt exports reached its maximum level of $2.8B. From 2009 to 2016, growth of global nail and bolt exports stood at a somewhat lower level.

 
Other Fabricated Metal Products
Blog, Sergey Avramenko, May 28, 2018 14

In 2016, approx. 39K tonnes of metal advertising sign were exported worldwide; moving up by 8% against the previous year figure. Overall, metal advertising sign exports continue to indicate a mild downturn. The growth pace was the most rapid in 2011, when export increased by 20% against the previous year level.

Other Fabricated Metal Products
Blog, Sergey Avramenko, June 26, 2017 539

The U.S. industrial mold market declined slightly over two consecutive years, accounting for 7,267 million USD in 2015.

Other Fabricated Metal Products
Blog, Irina Andreeva, June 24, 2016 583

The U.S. dominates in global imports on the bolt market, accounting for a 13% share (based on USD). It was followed by China (9%) and Germany (9%). In 2015, U.S. bolt, nut, screw, rivet, and washer imports totaled 8,254 million USD, which was 240 million USD (3%) higher than the year before.

 
Other Fabricated Metal Products
Blog, Sergey Avramenko, June 22, 2016 385

The U.S. ranks first in global imports of industrial mold, accounting for a 12% share (based on USD). It was followed by China (10%), Mexico (9%), and Germany (7%). In 2015, U.S. industrial mold imports totaled 2,195 million USD, which was 164 million USD (8%) more than the year before.

Other Fabricated Metal Products
Blog, Irina Andreeva, May 31, 2016 347

The U.S. is the leading global importer of gaskets, packing, and sealing devices, with a 12% share of total imports. It was followed by Germany (9%), China (7%), and Mexico (6%). In 2015, U.S. gasket, packing, and sealing device imports totaled 9,503 million USD, which was 287 million USD (+3%) higher than the previous year's value.

Other Fabricated Metal Products
Blog, Alla Yakimova, January 27, 2016 309

From 2008 to 2014, the U.S. industrial mold market showed mixed dynamics. A significant drop in 2009 (-26%) was followed by recovery growth from 2010 to 2014. In 2014, the industrial mold market reached 7.57 billion USD.

 
Other Fabricated Metal Products
Blog, Inna Ivonina, January 12, 2016 377

From 2007 to 2014, EU production on the spring market showed mixed dynamics, finally falling from 4,097 million EUR in 2007 to 3,900 million EUR in 2014. It dropped with a CAGR of -0.7% over the period under review. In physical terms, EU steel spring production was 1,381 thousand tonnes in 2014, growing by +1.4% annually from 2007 to 2014.

Other Fabricated Metal Products
Blog, Alla Yakimova, December 23, 2015 340

From 2007 to 2014, EU stranded wire production showed positive dynamics, except for the drop of 2008-2009 which was followed by a recovery. The production eventually grew from 1,779 thousand tonnes in 2007 to 2,133 thousand tonnes in 2014. It expanded with a CAGR of +2.6% over the period under review. In value terms, EU stranded wire production decreased to 2,894 million EUR in 2014, falling by -0.4% annually.

Other Fabricated Metal Products
Blog, Alla Yakimova, February 19, 2015 512

In 2013, India (7.6%), the Republic of Korea (6.6%), the United Arab Emirates (5.5%), Indonesia (4.8%) and the Russian Federation (4.5%) were the main destinations of exports for seamless steel pipe, making up 29.0% of China's exports in physical terms.