Metal-Forming Machinery And Machine Tools

Browse Popular Categories

Blog / Machinery And Equipment / Metal-Forming Machinery And Machine Tools

Metal-Forming Machinery And Machine Tools
Blog, Sergey Avramenko, May 28, 2018 24

In 2016, the global imports of metal finishing machine amounted to 575K tonnes, approximately reflecting the previous year figure. Overall, metal finishing machine imports continue to indicate a deep decrease. The most prominent rate of growth was recorded in 2012, an increase of 82% year-to-year. Over the period under review, global metal finishing machine imports attained its maximum volume of 1.3M tonnes in 2013; however, from 2014 to 2016, it failed to regain its strength. In value terms, metal finishing machine imports totaled $3.9B in 2016. In general, metal finishing machine imports continue to indicate a relatively flat trend pattern. Global metal finishing machine import peaked of $5.4B in 2012; however, from 2013 to 2016, it stood at a somewhat lower level.

Metal-Forming Machinery And Machine Tools
Blog, Anna Sergeeva, May 28, 2018 25

In 2016, the amount of machine-tool for working wood imported worldwide stood at 1.2M tonnes, growing by 9% against the previous year level.

Metal-Forming Machinery And Machine Tools
Blog, Anna Sergeeva, May 28, 2018 22

In 2016, the amount of machine-tool for removing material imported worldwide stood at 203K tonnes, falling by -4.4% against the previous year figure. In general, machine-tool for removing material imports continue to indicate a abrupt shrinkage. The pace of growth was the most pronounced in 2012, when import increased by 28% from the previous year level.

 
Metal-Forming Machinery And Machine Tools
Blog, Anna Sergeeva, May 28, 2018 24

Global machine-tool for drilling imports amounted to 363K tonnes in 2016, descending by -4.2% against the previous year level.

Metal-Forming Machinery And Machine Tools
Blog, Sergey Avramenko, May 28, 2018 24

In 2016, the global machine-tool for working metal imports amounted to 1.6M tonnes, falling by -2.0% against the previous year figure. The total import volume increased at an average annual rate of +1.8% over the period from 2007 to 2016; the trend pattern remained relatively stable, with somewhat noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2011, when imports increased by 7% from the previous year level.

Metal-Forming Machinery And Machine Tools
Blog, Anna Sergeeva, May 28, 2018 29

In 2016, the global imports of lathe for removing metal stood at 641K tonnes, shrinking by -5.2% against the previous year figure. Overall, lathe for removing metal imports continue to indicate a slight slump. The pace of growth was the most pronounced in 2011, an increase of 22% y-o-y. Global lathe for removing metal import peaked of 779K tonnes in 2008; however, from 2009 to 2016, it failed to regain its strength. In value terms, lathe for removing metal imports amounted to $5.9B in 2016. In general, lathe for removing metal imports continue to indicate a moderate deduction. Global lathe for removing metal import peaked of $8.4B in 2008; however, from 2009 to 2016, it failed to regain its strength. Top Lathe For Removing Metal Importing Countries in the World 1. USA (825.1 million USD) 2. China (559.1 million USD) 3. Germany (469.7 million USD) 4. Belgium (310.5 million USD) 5. Italy (284.6 million USD) 6. Mexico (275.1 million USD) 7. Turkey (197.3 million USD) 8. Russia (184.8 million USD) 9. Japan (169.6 million USD) 10. South Korea (137.7 million USD) 11. United Kingdom (130.5 million USD) 12. India (115.1 million USD) Lathe For Removing Metal Imports By Country In 2016, Japan (118K tonnes), followed by Germany (77K tonnes), South Korea (61K tonnes), the U.S. (56K tonnes), and China (36K tonnes) were the major importers of lathe for removing metal, together constituting 54% of total imports. The following importers - Belgium (23K tonnes), Italy (22K tonnes), Mexico (19K tonnes), Turkey (14K tonnes), the UK (13K tonnes), Russia (12K tonnes), and India (11K tonnes) together made up 18% of total imports. From 2007 to 2016, the most notable growth rate of lathe for removing metal imports, among the main importing countries, was attained by Germany (+6.2% per year), while the other global leaders experienced more modest paces of growth. In value terms, the U.S. ($825M), China ($559M) and Germany ($470M) were the countries with the highest levels of imports in 2016, together accounting for 31% of global imports.Belgium, Italy, Mexico, Turkey, Russia, Japan, South Korea, the UK and India lagged somewhat behind, together comprising a further 31%. Japan (+8.4% per year) recorded the highest growth rate of lathe for removing metal imports, in terms of the main importing countries, over the last 9 year period, while the other global leaders experienced more modest paces of growth. Lathe For Removing Metal Import Prices By Country In 2016, the average import price for lathe for removing metal amounted to $9,225 per tonne, shrinking by -7.3% against the previous year. In general, lathe for removing metal import price continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2011, when import price increased by 22% against the previous year level.

 
Metal-Forming Machinery And Machine Tools
Blog, Sergey Avramenko, May 28, 2018 20

In 2016, approx. 165K tonnes of metal finishing machine were exported worldwide; lowering by -4.6% against the previous year figure. Overall, it indicated a temperate growth from 2007 to 2016: the total exports volume increased at an average annual rate of +2.7% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations throughout the analyzed period. Based on the result of 2016, metal finishing machine exports increased by +8.6% against its level of 2014. The most prominent rate of growth was recorded in 2011, when export increased by 38% against the previous year level.

Metal-Forming Machinery And Machine Tools
Blog, Sergey Avramenko, May 28, 2018 18

In 2016, the global exports of machine-tool for working wood stood at 746K tonnes, ascending by 15% against the previous year level.

Metal-Forming Machinery And Machine Tools
Blog, Anna Sergeeva, May 28, 2018 24

In 2016, approx. 132K tonnes of machine-tool for removing material were exported worldwide; descending by -4.8% against the previous year figure. Overall, machine-tool for removing material exports continue to indicate a deep curtailment. The growth pace was the most rapid in 2012, when export increased by 32% year-to-year. Over the period under review, global machine-tool for removing material exports attained its maximum volume of 269K tonnes in 2007; however, from 2008 to 2016, it stood at a somewhat lower level.

 
Metal-Forming Machinery And Machine Tools
Blog, Sergey Avramenko, May 28, 2018 20

Global machine-tool for drilling exports amounted to 184K tonnes in 2016, waning by -6.7% against the previous year figure. Overall, machine-tool for drilling exports continue to indicate a significant downturn. The most prominent rate of growth was recorded in 2011, when export increased by 10% against the previous year level.

Metal-Forming Machinery And Machine Tools
Blog, Sergey Avramenko, May 28, 2018 19

In 2016, the amount of machine-tool for working metal exported worldwide totaled 754K tonnes, descending by -15.9% against the previous year figure. Overall, it indicated a slight growth from 2007 to 2016: the total exports volume increased at an average annual rate of +1.4% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations throughout the analyzed period. Based on the result of 2016, machine-tool for working metal exports decreased by -32.9% against its level of 2013. The most prominent rate of growth was recorded in 2011, when it surged by 36% against the previous year level.

Metal-Forming Machinery And Machine Tools
Blog, Sergey Avramenko, May 28, 2018 23

In 2016, approx. 343K tonnes of lathe for removing metal were exported worldwide; declining by -8.6% against the previous year figure. Overall, lathe for removing metal exports continue to indicate a significant decline. The most prominent rate of growth was recorded in 2011, when it surged by 34% year-to-year. Global lathe for removing metal export peaked of 453K tonnes in 2007; however, from 2008 to 2016, it stood at a somewhat lower level.

 
Metal-Forming Machinery And Machine Tools
Blog, Irina Andreeva, September 22, 2017 619

In 2016, the machine tool market increased by 5% to 9,715 million USD, fluctuating considerably over the period under review.

Metal-Forming Machinery And Machine Tools
Blog, Irina Andreeva, June 23, 2016 431

The U.S. ranks first in global imports of rolling mills and other metalworking machinery, accounting for an 11% share (based on USD). It was followed by China (10%), Germany (7%), and Korea (5%). In 2015, U.S. rolling mill and other metalworking machinery imports totaled 2,741 million USD, which was 105 million USD (4%) more than the year before.

Metal-Forming Machinery And Machine Tools
Blog, Olga Minchina, August 24, 2015 463

Construction sites are fraught with safety risks, especially those equipped with dangerous tools such as table saws, where losing a finger can take place suddenly in a matter of split seconds. Bosch, a leader in the construction industry, has come up with a new portable table saw they call REAXXTM, which can tell flesh from wood with its flesh-detecting Active Response TechnologyTM.

 
Metal-Forming Machinery And Machine Tools
Blog, Alexander Romanenko, August 13, 2015 391

Despite a drop in exports in 2014, Germany was able to maintain its dominance in the global metal finishing machine trade. In 2014, Germany exported 5,033 units of metal finishing machines totaling 981 million USD, 11% under the previous year. Its primary trading partner was China, where it supplied 26% of its total metal finishing machine exports in value terms, accounting for 30% of China's total imports.