Machinery And Equipment

Browse Popular Categories

Blog / Machinery And Equipment

Machinery And Equipment
Blog, Anna Sergeeva, July 16, 2018 64

The Spanish cash register market totaled €45M in 2016, experiencing  mixed trend patterns from 2007 to 2016. From 2008 – 2009, the market contracted significantly and then fluctuated over the next four year period. It then started to see a recovery, and surpassing pre-crisis figures, continued to expand.

Machinery And Equipment
Blog, Sergey Avramenko, June 26, 2018 67

In 2016, the industrial process furnace and oven market reached 2,664 million USD. Over the past seven year period, the industrial process furnace and oven market recorded steady growth, following a significant 23% contraction of the sector's market volume in 2009, during the throes of the international financial crisis. 

Machinery And Equipment
Blog, Sergey Avramenko, May 28, 2018 26

In 2016, approx. 1.8M tonnes of transmission shaft were imported worldwide; dropping by -8.5% against the previous year level.

 
Machinery And Equipment
Blog, Sergey Avramenko, May 28, 2018 21

In 2016, the amount of tap and valve imported worldwide stood at 6.5M tonnes, flattening at the previous year level.

Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 17

In 2016, the global imports of steam turbine totaled 249K tonnes, remaining stable against the previous year figure. The total import volume increased at an average annual rate of +3.7% over the period from 2007 to 2016; however, the trend pattern indicated some noticeable fluctuations over the period under review. The growth pace was the most rapid in 2015, when import increased by 31% from the previous year level.

Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 21

In 2016, the amount of pump for liquid imported worldwide stood at 13M tonnes, approximately equating the previous year figure. Overall, pump for liquid imports continue to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2010, when import increased by 4% y-o-y. Over the period under review, global pump for liquid imports attained its maximum volume in 2016, and are expected to retain its growth in the near future. In value terms, pump for liquid imports totaled $59B in 2016. The total import value increased at an average annual rate of +2.4% from 2007 to 2016; the trend pattern indicated some noticeable fluctuations over the period under review. Global pump for liquid import peaked of $69B in 2014; however, from 2015 to 2016, it stood at a somewhat lower level.

 
Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 20

Global mining machinery imports stood at 8.2M tonnes in 2016, moving up by 101% against the previous year figure. In general, mining machinery imports continue to indicate a remarkable increase. The most prominent rate of growth was recorded in 2016, when imports increased by 101% from the previous year level.

Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 22

In 2016, the global milking machine imports totaled 71K tonnes, standing approx. at the previous year figure. Overall, milking machine imports continue to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2011, when it surged by 22% against the previous year level.

Machinery And Equipment
Blog, Sergey Avramenko, May 28, 2018 21

In 2016, the global imports of metal finishing machine amounted to 575K tonnes, approximately reflecting the previous year figure. Overall, metal finishing machine imports continue to indicate a deep decrease. The most prominent rate of growth was recorded in 2012, an increase of 82% year-to-year. Over the period under review, global metal finishing machine imports attained its maximum volume of 1.3M tonnes in 2013; however, from 2014 to 2016, it failed to regain its strength. In value terms, metal finishing machine imports totaled $3.9B in 2016. In general, metal finishing machine imports continue to indicate a relatively flat trend pattern. Global metal finishing machine import peaked of $5.4B in 2012; however, from 2013 to 2016, it stood at a somewhat lower level.

 
Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 22

In 2016, the amount of manure spreader imported worldwide amounted to 1.2M tonnes, lowering by -1.9% against the previous year level.

Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 23

In 2016, the amount of machine-tool for working wood imported worldwide stood at 1.2M tonnes, growing by 9% against the previous year level.

Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 22

In 2016, the amount of machine-tool for removing material imported worldwide stood at 203K tonnes, falling by -4.4% against the previous year figure. In general, machine-tool for removing material imports continue to indicate a abrupt shrinkage. The pace of growth was the most pronounced in 2012, when import increased by 28% from the previous year level.

 
Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 21

Global machine-tool for drilling imports amounted to 363K tonnes in 2016, descending by -4.2% against the previous year level.

Machinery And Equipment
Blog, Sergey Avramenko, May 28, 2018 20

In 2016, approx. 65K tonnes of textile machinery were imported worldwide; falling by -13.3% against the previous year figure. In general, textile machinery imports continue to indicate a mild decrease. The most prominent rate of growth was recorded in 2013, when import increased by 27% year-to-year. Global textile machinery import peaked of 92K tonnes in 2014; however, from 2015 to 2016, it stood at a somewhat lower level.

Machinery And Equipment
Blog, Sergey Avramenko, May 28, 2018 21

In 2016, the global machine-tool for working metal imports amounted to 1.6M tonnes, falling by -2.0% against the previous year figure. The total import volume increased at an average annual rate of +1.8% over the period from 2007 to 2016; the trend pattern remained relatively stable, with somewhat noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2011, when imports increased by 7% from the previous year level.

 
Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 27

In 2016, the global imports of lathe for removing metal stood at 641K tonnes, shrinking by -5.2% against the previous year figure. Overall, lathe for removing metal imports continue to indicate a slight slump. The pace of growth was the most pronounced in 2011, an increase of 22% y-o-y. Global lathe for removing metal import peaked of 779K tonnes in 2008; however, from 2009 to 2016, it failed to regain its strength. In value terms, lathe for removing metal imports amounted to $5.9B in 2016. In general, lathe for removing metal imports continue to indicate a moderate deduction. Global lathe for removing metal import peaked of $8.4B in 2008; however, from 2009 to 2016, it failed to regain its strength. Top Lathe For Removing Metal Importing Countries in the World 1. USA (825.1 million USD) 2. China (559.1 million USD) 3. Germany (469.7 million USD) 4. Belgium (310.5 million USD) 5. Italy (284.6 million USD) 6. Mexico (275.1 million USD) 7. Turkey (197.3 million USD) 8. Russia (184.8 million USD) 9. Japan (169.6 million USD) 10. South Korea (137.7 million USD) 11. United Kingdom (130.5 million USD) 12. India (115.1 million USD) Lathe For Removing Metal Imports By Country In 2016, Japan (118K tonnes), followed by Germany (77K tonnes), South Korea (61K tonnes), the U.S. (56K tonnes), and China (36K tonnes) were the major importers of lathe for removing metal, together constituting 54% of total imports. The following importers - Belgium (23K tonnes), Italy (22K tonnes), Mexico (19K tonnes), Turkey (14K tonnes), the UK (13K tonnes), Russia (12K tonnes), and India (11K tonnes) together made up 18% of total imports. From 2007 to 2016, the most notable growth rate of lathe for removing metal imports, among the main importing countries, was attained by Germany (+6.2% per year), while the other global leaders experienced more modest paces of growth. In value terms, the U.S. ($825M), China ($559M) and Germany ($470M) were the countries with the highest levels of imports in 2016, together accounting for 31% of global imports.Belgium, Italy, Mexico, Turkey, Russia, Japan, South Korea, the UK and India lagged somewhat behind, together comprising a further 31%. Japan (+8.4% per year) recorded the highest growth rate of lathe for removing metal imports, in terms of the main importing countries, over the last 9 year period, while the other global leaders experienced more modest paces of growth. Lathe For Removing Metal Import Prices By Country In 2016, the average import price for lathe for removing metal amounted to $9,225 per tonne, shrinking by -7.3% against the previous year. In general, lathe for removing metal import price continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2011, when import price increased by 22% against the previous year level.

Machinery And Equipment
Blog, Sergey Avramenko, May 28, 2018 19

In 2016, the amount of internal combustion engine imported worldwide stood at 6M tonnes, growing by 7% against the previous year figure. Overall, it indicated a remarkable increase from 2007 to 2016: the total imports volume increased at an average annual rate of +6.8% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations throughout the analyzed period. Based on the result of 2016, internal combustion engine imports increased by +81.5% against its level of 2009. The pace of growth was the most pronounced in 2010, when it surged by 18% from the previous year level.

Machinery And Equipment
Blog, Anna Sergeeva, May 28, 2018 26

In 2016, the global sewing machine imports totaled 428K tonnes, ascending by 2% against the previous year figure. In general, sewing machine imports continue to indicate a relatively flat trend pattern. The growth pace was the most rapid in 2010, an increase of 17% from the previous year level.

 

  1   2   3   4   5   6   7   next >>