Peru - Flat-Rolled Products of Iron or Steel (Not Further Worked Than Hot-Rolled) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingPeru: Hot-Rolled Steel Products Market 2024
Hot-Rolled Steel Products Market Size in Peru
In 2023, after two years of growth, there was decline in the Peruvian hot-rolled steel products market, when its value decreased by X% to $X. Overall, consumption saw a relatively flat trend pattern. Over the period under review, the market attained the peak level at $X in 2022, and then shrank in the following year.
Hot-Rolled Steel Products Production in Peru
In value terms, hot-rolled steel products production expanded significantly to $X in 2023 estimated in export price. In general, production saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 when the production volume increased by X% against the previous year. As a result, production attained the peak level of $X. From 2022 to 2023, production growth failed to regain momentum.
Hot-Rolled Steel Products Exports
Exports from Peru
In 2023, exports of flat-rolled products of iron or steel (not further worked than hot-rolled) from Peru shrank to X tons, reducing by X% against the previous year. In general, exports, however, continue to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2013 when exports increased by X% against the previous year. As a result, the exports reached the peak of X tons. From 2014 to 2023, the growth of the exports failed to regain momentum.
In value terms, hot-rolled steel products exports fell remarkably to $X in 2023. Over the period under review, exports, however, recorded a notable increase. The most prominent rate of growth was recorded in 2018 with an increase of X%. The exports peaked at $X in 2013; however, from 2014 to 2023, the exports stood at a somewhat lower figure.
Exports by Country
Chile (X tons), Bolivia (X tons) and Ecuador (X tons) were the main destinations of hot-rolled steel products exports from Peru, together accounting for X% of total exports.
From 2012 to 2023, the biggest increases were recorded for Ecuador (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Ecuador ($X), Bolivia ($X) and Chile ($X) were the largest markets for hot-rolled steel products exported from Peru worldwide, together accounting for X% of total exports.
Among the main countries of destination, Ecuador, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2023, the average hot-rolled steel products export price amounted to $X per ton, waning by X% against the previous year. Over the last eleven-year period, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2021 when the average export price increased by X%. Over the period under review, the average export prices attained the peak figure at $X per ton in 2022, and then fell modestly in the following year.
There were significant differences in the average prices for the major foreign markets. In 2023, amid the top suppliers, the country with the highest price was the United States ($X per ton), while the average price for exports to Venezuela ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Panama (X%), while the prices for the other major destinations experienced more modest paces of growth.
Hot-Rolled Steel Products Imports
Imports into Peru
In 2023, the amount of flat-rolled products of iron or steel (not further worked than hot-rolled) imported into Peru amounted to X tons, increasing by X% against 2022. In general, imports, however, continue to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2016 with an increase of X% against the previous year. Over the period under review, imports attained the peak figure at X tons in 2019; however, from 2020 to 2023, imports remained at a lower figure.
In value terms, hot-rolled steel products imports contracted modestly to $X in 2023. Over the period under review, imports recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, imports reached the maximum at $X in 2022, and then declined in the following year.
Imports by Country
In 2023, China (X tons) constituted the largest supplier of hot-rolled steel products to Peru, with a X% share of total imports. Moreover, hot-rolled steel products imports from China exceeded the figures recorded by the second-largest supplier, Japan (X tons), fivefold. Brazil (X tons) ranked third in terms of total imports with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of volume from China stood at X%. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (X% per year) and Brazil (X% per year).
In value terms, China ($X) constituted the largest supplier of flat-rolled products of iron or steel (not further worked than hot-rolled) to Peru, comprising X% of total imports. The second position in the ranking was held by Japan ($X), with a X% share of total imports. It was followed by Brazil, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value from China stood at X%. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (X% per year) and Brazil (X% per year).
Import Prices by Country
In 2023, the average hot-rolled steel products import price amounted to $X per ton, shrinking by X% against the previous year. Over the period under review, import price indicated a slight expansion from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, hot-rolled steel products import price increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 an increase of X%. Over the period under review, average import prices hit record highs at $X per ton in 2022, and then fell in the following year.
Average prices varied somewhat amongst the major supplying countries. In 2023, amid the top importers, the highest price was recorded for prices from Russia ($X per ton) and Brazil ($X per ton), while the price for China ($X per ton) and Japan ($X per ton) were amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Russia (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the hot-rolled steel products market in Peru. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils
- Prodcom 24103130 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, not in coils, simply hot-rolled, not clad, plated or coated, w ith patterns in relief directly due to the rolling process and products of a thickness < 4,75 mm, without patterns in relief
- Prodcom 24103150 - Flat-rolled products, of iron or non-alloy steel, of a width . .600 mm (excluding
- Prodcom 24103210 - Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > .150 mm but < .600 mm and a thickness of . 4 mm, not in coils, without patterns in relief, commonly
- Prodcom 24103230 - Flat-rolled products of iron or non-alloy steel, of a width < .600 mm, simply hot-rolled, not clad, plated or coated (excluding
- Prodcom 24103330 - Plates and sheets produced by cutting from hot-rolled wide strip of a width of .600 mm or more, of stainless steel
- Prodcom 24103340 - Plates and sheets produced on a reversing mill (quarto) of a width of .600 mm or more and wide flats, of stainless steel
- Prodcom 241033Z0 - Hot-rolled flat products in coil of a width . .600 mm, of stainless steel
- Prodcom 241034Z0 - Hot-rolled flat products in coil of a width < .600 mm, of stainless steel
- Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)
- Prodcom 24103520 - Flat-rolled products of high-speed steel, of a width . .600 mm, h ot-rolled or cold-rolled
- Prodcom 24103530 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, not in coils (excluding organic coated products, p roducts of a thickness < 4,75 mm and products of high-
- Prodcom 24103540 - Flat-rolled products of alloy steel other than stainless, of a width . .600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excluding products of tool steel, high-speed steel or silicon-electrical steel)
- Prodcom 24103600 - Flat-rolled products of alloy steel other than stainless, of a width of < .600 mm, not further worked than hot-rolled (excluding products of high-speed steel or silicon-electrical steel)
Country coverage:
- Peru
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Peru
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the hot-rolled steel products market in Asia.
This report provides an in-depth analysis of the hot-rolled steel products market in the U.S..
This report provides an in-depth analysis of the hot-rolled steel products market in China.
This report provides an in-depth analysis of the hot-rolled steel products market in the EU.
This report provides an in-depth analysis of the global hot-rolled steel products market.
- Hot-Rolled Steel Products Price Peru
- Hot-Rolled Steel Products Market
- Cold-Rolled Steel Products Market
- Flat-Rolled Steel Products Market
- Iron Bar Market
- Hot-Rolled Free-Cutting Steel Market
- Hot-Rolled Wire Stainless Steel Rod Market
- Hot-Rolled Round Stainless Steel Market
- Silicon-Electrical Steel Flat-Rolled Product Market
- Hot-Rolled High Speed Steel Bar Market