Eastern Europe - Acrylic Polymers (In Primary Forms) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEastern Europe: Acrylic Polymer Market 2024
Acrylic Polymer Market Size in Eastern Europe
In 2023, the East European acrylic polymer market increased by X% to $X, rising for the third consecutive year after two years of decline. The market value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The level of consumption peaked in 2023 and is expected to retain growth in the near future.
Acrylic Polymer Production in Eastern Europe
In value terms, acrylic polymer production rose significantly to $X in 2023 estimated in export price. The total production indicated a noticeable expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, production decreased by X% against 2021 indices. The growth pace was the most rapid in 2021 with an increase of X%. As a result, production attained the peak level of $X. From 2022 to 2023, production growth remained at a somewhat lower figure.
Acrylic Polymer Exports
Exports in Eastern Europe
In 2023, approx. X tons of acrylic polymers (in primary forms) were exported in Eastern Europe; picking up by X% compared with the previous year's figure. Over the period under review, exports showed a prominent increase. The most prominent rate of growth was recorded in 2018 with an increase of X%. Over the period under review, the exports hit record highs at X tons in 2021; however, from 2022 to 2023, the exports remained at a lower figure.
In value terms, acrylic polymer exports stood at $X in 2023. Overall, exports showed resilient growth. The pace of growth appeared the most rapid in 2018 when exports increased by X% against the previous year. Over the period under review, the exports hit record highs at $X in 2021; however, from 2022 to 2023, the exports remained at a lower figure.
Exports by Country
Poland was the major exporting country with an export of about X tons, which finished at X% of total exports. The Czech Republic (X tons) held a X% share (based on physical terms) of total exports, which put it in second place, followed by Russia (X%). The following exporters - Hungary (X tons), Slovakia (X tons) and Belarus (X tons) - each finished at a X% share of total exports.
From 2012 to 2023, the biggest increases were recorded for Russia (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Poland ($X) remains the largest acrylic polymer supplier in Eastern Europe, comprising X% of total exports. The second position in the ranking was taken by the Czech Republic ($X), with a X% share of total exports. It was followed by Russia, with an X% share.
From 2012 to 2023, the average annual growth rate of value in Poland stood at X%. In the other countries, the average annual rates were as follows: the Czech Republic (X% per year) and Russia (X% per year).
Export Prices by Country
In 2023, the export price in Eastern Europe amounted to $X per ton, approximately equating the previous year. Overall, the export price continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2021 an increase of X% against the previous year. Over the period under review, the export prices reached the peak figure at $X per ton in 2013; however, from 2014 to 2023, the export prices failed to regain momentum.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Hungary ($X per ton), while the Czech Republic ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Hungary (X%), while the other leaders experienced more modest paces of growth.
Acrylic Polymer Imports
Imports in Eastern Europe
In 2023, supplies from abroad of acrylic polymers (in primary forms) decreased by X% to X tons, falling for the second consecutive year after eight years of growth. The total import volume increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2016 when imports increased by X% against the previous year. Over the period under review, imports attained the peak figure at X tons in 2021; however, from 2022 to 2023, imports failed to regain momentum.
In value terms, acrylic polymer imports declined modestly to $X in 2023. Total imports indicated a tangible expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2020 indices. The growth pace was the most rapid in 2021 when imports increased by X%. The level of import peaked at $X in 2022, and then fell modestly in the following year.
Imports by Country
In 2023, Poland (X tons) was the major importer of acrylic polymers (in primary forms), comprising X% of total imports. Russia (X tons) held a X% share (based on physical terms) of total imports, which put it in second place, followed by the Czech Republic (X%) and Romania (X%). Hungary (X tons), Ukraine (X tons) and Bulgaria (X tons) followed a long way behind the leaders.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by the Czech Republic (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Poland ($X) constitutes the largest market for imported acrylic polymers (in primary forms) in Eastern Europe, comprising X% of total imports. The second position in the ranking was held by Russia ($X), with a X% share of total imports. It was followed by the Czech Republic, with an X% share.
From 2012 to 2023, the average annual growth rate of value in Poland stood at X%. The remaining importing countries recorded the following average annual rates of imports growth: Russia (X% per year) and the Czech Republic (X% per year).
Import Prices by Country
The import price in Eastern Europe stood at $X per ton in 2023, approximately equating the previous year. Overall, the import price, however, saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 when the import price increased by X% against the previous year. The level of import peaked at $X per ton in 2014; however, from 2015 to 2023, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Hungary ($X per ton), while Ukraine ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Romania (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the acrylic polymer market in Eastern Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 20165350 - Polymethyl methacrylate, in primary forms
- Prodcom 20165390 - Acrylic polymers, in primary forms (excluding polymethyl methacrylate)
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Eastern Europe, split by region and country
- Trade (exports and imports) in Eastern Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Belarus
- Bulgaria
- Czech Republic
- Estonia
- Hungary
- Latvia
- Lithuania
- Moldova
- Poland
- Romania
- Russia
- Slovakia
- Ukraine
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the acrylic polymer market in Asia.
This report provides an in-depth analysis of the acrylic polymer market in the U.S..
This report provides an in-depth analysis of the acrylic polymer market in China.
This report provides an in-depth analysis of the acrylic polymer market in the EU.
This report provides an in-depth analysis of the global acrylic polymer market.
- Acrylic Polymer Market
- Polyethylene With A Specific Gravity of Less Than Market
- Polyethylene in Primary Forms Market
- Plastics in Primary Forms Market
- Polystyrene Market
- Styrene-Acrylonitrile Market
- Polycarbonate Market
- Polyamide Market
- Polyethylene Terephthalate and Other Polyethylene Terephthalate in Primary Forms Market
- Natural Polymers Market